skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Mitigating Chemo-Mechanical Failure in Li-S Solid State Batteries with Compliant Cathodes
Solid-state sulfur cathodes based on inorganic sulfide solid electrolytes can enable energy-dense lithium batteries. However, volume changes and chemical decomposition can drive delamination and degradation during cycling. To overcome these challenges, this paper reports an in situ approach to encapsulate the solid-state sulfur cathode with a gel polymer electrolyte (GPE). The GPE is covalently bonded with the sulfide solid electrolyte and acts as a barrier that suppresses chemical decomposition between the sulfide solid electrolyte and cathode active material. The elastic GPE maintains interfacial contact within the sulfur cathode allowing for greater sulfur utilization. The solid-state sulfur cathode with GPE demonstrates capacities nearing 700 mAh g −1 and capacity retention over 100 cycles.  more » « less
Award ID(s):
1847029
PAR ID:
10333601
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Journal of The Electrochemical Society
Volume:
169
Issue:
6
ISSN:
0013-4651
Page Range / eLocation ID:
060503
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry A)
    All-solid-state batteries (ASSBs) are viewed as promising next-generation energy storage devices, due to their enhanced safety by replacing organic liquid electrolytes with non-flammable solid-state electrolytes (SSEs). The high ionic conductivity and low Young's modulus of sulfide SSEs make them suitable candidates for commercial ASSBs. Nevertheless, sulfide SSEs are generally reported to be unstable in ambient air. Moreover, instead of gloveboxes used for laboratory scale studies, large scale production of batteries is usually conducted in dry rooms. Thus, this study aims to elucidate the chemical evolution of a sulfide electrolyte, Li 6 PS 5 Cl (LPSCl), during air exposure and to evaluate its dry room compatibility. When LPSCl is exposed to ambient air, hydrolysis, hydration, and carbonate formation can occur. Moreover, hydrolysis can lead to irreversible sulfur loss and therefore LPSCl cannot be fully recovered in the subsequent heat treatment. During heat treatment, exposed LPSCl undergoes dehydration, decomposition of carbonate species, and reformation of the LPSCl phase. Finally, LPSCl was found to exhibit good stability in a dry room environment and was subject to only minor conductivity loss due to carbonate formation. The dry room exposed LPSCl sample was tested in a LiNi 0.8 Co 0.1 Mn 0.1 O 2 |LiIn half-cell, exhibiting no significant loss of electrochemical performance compared with the pristine LPSCl, proving it to be compatible with dry room manufacturing processes. 
    more » « less
  2. ; ; (, Advanced functional materials)
    A major challenge for lithium-containing electrochemical systems is the formation of lithium carbonates. Solid-state electrolytes circumvent the use of organic liquids that can generate these species, but they are still susceptible to Li2CO3 formation from exposure to water vapor and carbon dioxide. It is reported here that trace quantities of Li2CO3, which are re-formed following standard mitigation and handling procedures, can decompose at high charging potentials and degrade the electrolyte–cathode interface. Operando electrochemical mass spectrometry (EC–MS) is employed to monitor the outgassing of solid-state batteries containing the garnet electrolyte Li7La3Zr2O12 (LLZO) and using appropriate controls CO2 and O2 are identified to emanate from the electrolyte–cathode interface at charging potentials > 3.8 V (vs Li/Li+). The gas evolution is correlated with a large increase in cathode interfacial resistance observed by potential-resolved impedance spectroscopy. This is the first evidence of electrochemical decomposition of interfacial Li2CO3 in garnet cells and suggests a need to report “time-to-assembly” for cell preparation methods 
    more » « less
  3. ; ; (, Materials Research Society)
    Metal-ion batteries (e.g., lithium and sodium ion batteries) are the promising power sources for portable electronics, electric vehicles, and smart grids. Recent metal-ion batteries with organic liquid electrolytes still suffer from safety issues regarding inflammability and insufficient lifetime.1 As the next generation energy storage devices, all-solid-state batteries (ASSBs) have promising potentials for the improved safety, higher energy density, and longer cycle life than conventional Li-ion batteries.2 The nonflammable solid electrolytes (SEs), where only Li ions are mobile, could prevent battery combustion and explosion since the side reactions that cause safety issues as well as degradation of the battery performance are largely suppressed. However, their practical application is hampered by the high resistance arising at the solid–solid electrode–electrolyte interface (including cathode-electrolyte interface and anode-electrolyte interface).3 Several methods have been introduced to optimize the contact capability as well as the electrochemical/chemical stability between the metal anodes (i.e.: Li and Na) and the SEs, which exhibited decent results in decreasing the charge transfer resistance and broadening the range of the stable energy window (i.e., lowing the chemical potential of metal anode below the highest occupied molecular orbital of the SEs).4 Nevertheless, mitigation for the cathode in ASSB is tardily developed because: (1) the porous structure of the cathode is hard to be infiltrated by SEs;5 (2) SEs would be oxidized and decomposed by the high valence state elements at the surface of the cathode at high state of charge.5 Herein, we demonstrate a universal cathode design strategy to achieve superior contact capability and high electrochemical/chemical stability with SEs. Stereolithography is adopted as a manufacturing technique to realize a hierarchical three-dimensional (HTD) electrode architecture with micro-size channels, which is expected to provide larger contact areas with SEs. Then, the manufactured cathode is sintered at 700 °C in a reducing atmosphere (e.g.: H2) to accomplish the carbonization of the resin, delivering sufficiently high electronic conductivity for the cathode. To avoid the direct exposure of the cathode active materials to the SEs, oxidative chemical vapor deposition technique (oCVD) is leveraged to build conformal and highly conducting poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of the HTD cathode.6 To demonstrate our design strategy, both NCM811 and Na3V2(PO4)3 is selected as active materials in the HTD cathode, then each cathode is paired with organic (polyacrylonitrile-based) and inorganic (sulfur-based) SEs assembled into two batteries (total four batteries). SEM and TEM reveal the micro-size HTD structure with built-in channels. Featured by the HTD architecture, the intrinsic kinetic and thermodynamic conditions will be enhanced by larger surface contact areas, more active sites, improved infusion and electrolyte ion accessibility, and larger volume expansion capability. Disclosed by X-ray computed tomography, the interface between cathode and SEs in the four modified samples demonstrates higher homogeneity at the interface between the cathode and SEs than that of all other pristine samples. Atomic force microscopy is employed to measure the potential image of the cross-sectional interface by the peak force tapping mode. The average potential of modified samples is lower than that of pristine samples, which confirms a weakened space charge layer by the enhanced contact capability. In addition, through Electron Energy Loss Spectroscopy coupled with Scanning Transmission Electron Microscopy, the preserved interface between HTD cathode and SE is identified; however, the decomposing of the pristine cathode is clearly observed. In addition, Finite element method simulations validate that the diffusion dynamics of lithium ions is favored by HTD structure. Such a demonstrated universal strategy provides a new guideline to engineer cathode electrolyte interface by reconstructing electrode structures that can be applicable to all solid-state batteries in a wide range of chemical conditions. 
    more » « less
  4. ; ; ; ; (, Advanced Energy Materials)
    Abstract Interphase layers that form at contact points between the solid electrolyte (SE) and cathode active material in solid‐state lithium‐ion batteries (SS‐LIBs) increase cell impedance, but the mechanisms for this interphase formation are poorly understood. Here, we demonstrate a simple workflow to study cathode–electrolyte interphase (CEI) formation using 4D‐scanning transmission electron microscopy (4D‐STEM) that does not require SS‐LIB assembly. We show benefits of MoCl5:EtOH as a chemical delithiating agent, and prepare chemically delithiated cathode LiNi0.6Co0.2Mn0.2O2(NMC) powder in contact with Li10GeP2S12(LGPS) SE powder as a SS‐LIB CEI surrogate. We map the composition and structure of the CEI layers using 4D‐STEM, energy dispersive X‐ray spectroscopy (EDS), and electron pair distribution function analysis (ePDF). EDS indicates O migration from NMC into LGPS. ePDF analysis indicates sulfate and phosphate formation localized on the surface of LGPS, as well as Li2O formation within the LGPS phase, and self‐decomposition of NMC. These results are consistent with an electrochemical self‐discharge mechanism for interphase formation arising from coupled redox reactions of sulfur oxidation in LGPS and transition metal reduction in NMC. This suggests that coatings which stop anion transport but allow Li+and e−transport may prevent interphase formation and reduce impedance in SS‐LIBs. 
    more » « less
  5. ; ; ; ; ; (, Materials Advances)
    The all-solid-state battery is a promising alternative to conventional lithium-ion batteries that have reached the limit of their technological capabilities. The next-generation lithium-ion batteries are expected to be eco-friendly, long-lasting, and safe while demonstrating high energy density and providing ultrafast charging. These much-needed properties require significant efforts to uncover and utilize the chemical, morphological, and electrochemical properties of solid-state electrolytes and cathode nanocomposites. Here we report solid-state electrochemical cells based on lithium oxyhalide electrolyte that is produced by melt-casting. This method results in enhanced cathode/electrolyte interfaces that allow exceptionally high charging rates (>4000C) while maintaining the electrochemical stability of solid-state electrolyte in the presence of lithium metal anode and lithium iron phosphate-based cathode. The cells exhibit long cycle life (>1800 cycles at 100 °C) and offer a promising route to the next-generation all-solid-state battery technology. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email