skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Too Much of a Good Thing? Assessing Performance Tradeoffs of Two-Electron Compounds for Redox Flow Batteries
Engineering redox-active compounds to support stable multi-electron transfer is an emerging strategy for enhancing the energy density and reducing the cost of redox flow batteries (RFBs). However, when sequential electron transfers occur at disparate redox potentials, increases in electrolyte capacity are accompanied by decreases in voltaic efficiency, restricting the viable design space. To understand these performance tradeoffs for two-electron compounds specifically, we apply theoretical models to investigate the influence of the electron transfer mechanism and redox-active species properties on galvanostatic processes. First, we model chronopotentiometry at a planar electrode to understand how the electrochemical response and associated concentration distributions depend on thermodynamic and mass transport factors. Second, using a zero-dimensional galvanostatic charge/discharge model, we assess the effects of these key descriptors on performance (i.e., electrode polarization and voltaic efficiency) for a single half-cell. Finally, we extend the galvanostatic model to include two-electron compounds in both half-cells, demonstrating compounding voltage losses for a full cell. These results fundamentally show why multi-electron compounds with disparate redox potentials are less attractive than those with concerted electron transfer. As such, we suggest new directions for molecular and systems engineering to improve the prospects of these materials for RFBs.  more » « less
Award ID(s):
1805566
PAR ID:
10336178
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Journal of The Electrochemical Society
Volume:
168
Issue:
5
ISSN:
0013-4651
Page Range / eLocation ID:
050501
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, ChemXriv)
    Redox flow batteries (RFBs) have emerged as significant energy storage systems amid the growing adoption of renewable energy. However, the advancement of all-organic RFBs is hindered by material crossover, limited energy density, and the time-consuming selection of suitable electrolyte partners. To address these challenges, bipolar redox-active organic molecules (BRMs) show promise for charge storage in symmetric organic redox flow batteries (SORFBs), although their development can be complex and tedious. In this study, we report an approach aimed at streamlining the identification of suitable compounds through an examination of the organophotocatalyst literature, illustrated through six acridinium compounds exhibiting stable redox states. These compounds were thoroughly characterized in electrochemical cells and subjected to cycling tests in fully symmetric flow batteries. Notably, a trisubstituted electron-rich acridinium compound emerged as a potential candidate, demonstrating over 20 days of cycling stability. Given the extensive library of organic catalysts and the advantages of SORFB designs, this approach will prove to be essential for developing an innovative electrochemical storage system. 
    more » « less
  2. ; ; ; (, 72nd International Society of Electrochemistry Meeting)
    Biomass is abundant, inexpensive and renewable, therefore, it is highly expected to play a significant role in our future energy and chemical landscapes. The US DOE has identified furanic compounds (furfural and 5-(hydroxymethyl)furfural (HMF)) as the top platform building-block chemicals that can be readily derived from biomass sources [1]. Electrocatalytic conversion of these furanic compounds is an emerging route for the sustainable production of valuable chemicals [2, 3]. In my presentation, I will first present our recent mechanistic study of electrochemical reduction of furfural through a combination of voltammetry, preparative electrolysis, thiol-electrode modifications, and kinetic isotope studies [4]. It is demonstrated that two distinct mechanisms are operable on metallic Cu electrodes in acidic electrolytes: (i) electrocatalytic hydrogenation (ECH) and (ii) direct electroreduction. The contributions of each mechanism to the observed product distribution are clarified by evaluating the requirement for direct chemical interactions with the electrode surface and the role of adsorbed hydrogen. Further analysis reveals that hydrogenation and hydrogenolysis products are generated by parallel ECH pathways. Understanding the underlying mechanisms enables the manipulation of furfural reduction by rationally tuning the electrode potential, electrolyte pH, and furfural concentration to promote selective formation of important bio-based polymer precursors and fuels. Next, I will present electrocatalytic conversion of HMF to two biobased monomers in an H-type electrochemical cell [5]. HMF reduction (hydrogenation) to 2,5-bis(hydroxymethyl)furan (BHMF) was achieved under mild electrolyte conditions and ambient temperature using a Ag/C cathode. Meanwhile, HMF oxidation to 2,5-furandicarboxylic acid (FDCA) with ~100% efficiency was facilitated under the same conditions by a homogeneous nitroxyl radical redox mediator, together with an inexpensive carbon felt anode. The selectivity and efficiency for Ag-catalyzed BHMF formation were sensitive to cathode potential, owing to competition from HMF hydrodimerization reactions and water reduction (hydrogen evolution). Moreover, the carbon support of Ag/C was active for HMF reduction and contributed to undesired dimer/oligomer formation at strongly cathodic potentials. As a result, high BHMF selectivity and efficiency were only achieved within a narrow potential range near –1.3 V. Fortunately, the selectivity of redox-mediated HMF oxidation was insensitive to anode potential, thus allowing HMF hydrogenation and oxidation half reactions to be performed together in a single cathode-potential-controlled cell. Electrocatalytic HMF conversion in a paired cell achieved high molar yields of BHMF and FDCA, and nearly doubled electron efficiency compared to the unpaired cell. Finally, I will briefly introduce our recent work on the development of a three-electrode flow cell with an oxide-derived Ag (OD-Ag) cathode and catbon felt anode for paring elecatalytic oxidation and reduction of HMF. The flow cell has a remarkable cell voltage reduction from ~7.5 V to ~2.0 V by transferring the electrolysis from the H-type cell to the flow cell [6]. This represents a more than fourfold increase in the energy efficiency at the 10 mA operation. A combined faradaic efficiency of 163% was obtained to BHMF and FDCA. Alternatively, the anodic hydrogen oxidation reaction on platinum further reduced the cell voltage to only ~0.85 V at 10 mA operation. These paired processes have shown potential for integrating renewable electricity and carbon for distributed chemical manufacturing in the future. 
    more » « less
  3. ; ; (, Angewandte Chemie International Edition)
    Abstract There is a strong interest in finding highly soluble redox compounds to improve the energy density of redox flow batteries (RFBs). However, the performance of electrolytes is often negatively influenced by high solute concentration. Herein, we designed a high‐potential (0.5 V vs. Ag/Ag+) catholyte for RFBs, where the charged and discharged species are both gaseous nitrogen oxides (NOx). These species can be liberated from the liquid electrolyte and stored in a separate gas container, allowing scale‐up of storage capacity without increasing the concentration and volume of the electrolyte. The oxidation of NO in the presence of NO3−affords N2O3, and the reduction of N2O3regenerates NO and NO3−, together affording the electrochemical reaction: NO3−+3 NO⇌2 N2O3+e−with a low mass/charge ratio of 152 grams per mole of stored electron. A proof‐of‐concept NOxsymmetric H‐cell shows 200 stable cycles over 400 hours with >97 % Coulombic efficiency and negligible capacity decay. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Nature Communications)
    Abstract Microelectronic devices can directly communicate with biology, as electronic information can be transmitted via redox reactions within biological systems. By engineering biology’s native redox networks, we enable electronic interrogation and control of biological systems at several hierarchical levels: proteins, cells, and cell consortia. First, electro-biofabrication facilitates on-device biological component assembly. Then, electrode-actuated redox data transmission and redox-linked synthetic biology allows programming of enzyme activity and closed-loop electrogenetic control of cellular function. Specifically, horseradish peroxidase is assembled onto interdigitated electrodes where electrode-generated hydrogen peroxide controls its activity.E. coli’s stress response regulon,oxyRS, is rewired to enable algorithm-based feedback control of gene expression, including an eCRISPR module that switches cell-cell quorum sensing communication from one autoinducer to another—creating an electronically controlled ‘bilingual’ cell. Then, these disparate redox-guided devices are wirelessly connected, enabling real-time communication and user-based control. We suggest these methodologies will help us to better understand and develop sophisticated control for biology. 
    more » « less
  5. ; ; ; (, Angewandte Chemie International Edition)
    Abstract Redox flow batteries (RFBs) with high energy densities are essential for efficient and sustainable long‐term energy storage on a grid scale. To advance the development of nonaqueous RFBs with high energy densities, a new organic RFB system employing a molecularly engineered tetrathiafulvalene derivative ((PEG3/PerF)‐TTF) as a high energy density catholyte was developed. A synergistic approach to the molecular design of tetrathiafulvalene (TTF) was applied, with the incorporation of polyethylene glycol (PEG) chains, which enhance its solubility in organic carbonate electrolytes, and a perfluoro (PerF) group to increase its redox potential. When paired with a lithium metal anode, the two‐electron‐active(PEG3/PerF)‐TTFcatholyte produced a cell voltage of 3.56 V for the first redox process and 3.92 V for the second redox process. In cyclic voltammetry and flow cell tests, the redox chemistry exhibited excellent cycling stability. The Li|(PEG3/PerF)‐TTFbatteries, with concentrations of 0.1 M and 0.5 M, demonstrated capacity retention rates of ~94 % (99.87 % per cycle, 97.52 % per day) and 90 % (99.93 % per cycle, 99.16 % per day), and the average Coulombic efficiencies of 99.38 % and 98.35 %, respectively. The flow cell achieved a high power density of 129 mW/cm2. Furthermore, owing to the high redox potential and solubility of(PEG3/PerF)‐TTF, the flow cell attained a high operational energy density of 72 Wh/L (100 Wh/L theoretical). A 0.75 M flow cell exhibited an even higher operational energy density of 96 Wh/L (150 Wh/L theoretical). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email