skip to main content

Explore Research Products in the NSF-PAR

Title: Analyzing the Mechanical Properties of Thermoplastic Reinforced with Natural Fibers
Synthetic fibers such as glass, carbon, etc., are used as reinforcement in polymer composites due to their high strength and modulus. However, synthetic fibers contribute to high costs and have a significant environmental impact. To overcome this challenge, various natural fibers, including banana, kenaf, coir, bamboo, hemp, and sisal fiber, as reinforced in a polymer matrix are investigated for mechanical properties. In this study, biocomposites with natural fibers as reinforced are developed and characterized. Treated and untreated natural fibers such as flax, maple, and pine as reinforced in thermoplastic, in this study, polypropylene (PP), are investigated for the mechanical properties, including tensile, flexural, and impact test. Mechanical test results exhibited that adding the natural fibers enhanced the tensile, flexural, and impact properties. It can be inferred that these biocomposites can be used as potential materials for the automobile industry.  more » « less
Award ID(s):
2113804
NSF-PAR ID:
10336317
Author(s) / Creator(s):
Editor(s):
ACS
Date Published:
Journal Name:
ACS
ISSN:
1165-8223
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , SAMPE 2023 Proceedings)
    Beckwith, S. ; Flinn, B. ; Dustin, J. (Ed.)
    A novel additive manufacturing process utilizing the laminated object manufacturing (LOM) technology with woven natural fiber-reinforced biopolymer is investigated in this paper. Traditional synthetic composite materials are products from nonrenewable crude oil with limited end-of-life options, and therefore not environmentally friendly. The continuous woven natural fiber is used to significantly strengthen the mechanical properties of biocomposites and PLA biopolymer as the matrix made the material completely biodegradable. This is one of the promising replacements for synthetic composites in applications such as automotive panels, constructive materials, and sports and musical instruments. A LOM 3D printer prototype has been designed and built by the team using a laser beam in cutting the woven natural fiber reinforcement and molten PLA powder to bind layers together. Tensile and flexural properties of the LOM 3D printed biocomposites were measured using ASTM test standards and then compared with corresponding values measured from pure PLA specimens 3D printed through FDM. Improved mechanical properties from LOM 3D-printed biocomposites were identified by the team. SEM imaging was performed to identify the polymer infusing and fiber-matrix binding situations. This research took advantage of both the material and process’s benefits and combine them into one sustainable practice. 
    more » « less
  2. ( , ASC Thirty-Sixth Technical Conference Proceedings)
    Ozden Ochoa (Ed.)
    This paper investigates the mechanical properties of potential sheet stocks of a Laminated Object Manufacturing (LOM) 3D printer made using woven jute fabrics infused with two types of bioresin. The combinations of bioresins and the reinforcements would make green sheet stocks that are expected to be environmentally friendly comparing to traditional synthetic fibers infused with regular resins. Pure resin samples are also involved for comparison purposes. Both tensile and flexural properties are measured following ASTM D638 and D3039 standards (for tensile tests) as well as ASTM D790 and D7264 standards (for flexural tests). Detailed processes of specimen preparation followed by test procedures are introduced. Tensile strengths and moduli as well as flexural strengths and moduli are obtained for comparison. Based on the study of the mechanical properties of both types of pure resin and woven jute fiber-reinforced composites, the research team concluded a few important findings that could be used as guidelines in the sheet stock selection and preparation for the LOM 3D printer that is currently under the building process. 
    more » « less
  3. ; ( , Polymer Composites)

    Thermoplastic polyamide 6 composites reinforced with flax fiber fabric and kraft pulp cellulose mat were prepared by anionicin situring‐opening polymerization (ROP) using a special vacuum‐assisted resin infusion process. The effects of the polymerization initiator, fiber alkali pre‐treatment, fiber type, polymerization temperature, and surface modification of fibers with organosilane coupling agents on the ROP reaction, polymer conversion and the physical and mechanical properties of the composites were investigated. The results showed that a combination of alkali pre‐treatment and the use of relatively less reactive magnesium bromide based anionic initiator gave a successful ROP reaction and high polymer conversion. Analysis of the physical and mechanical properties of the composite panels showed that optimal mechanical properties could be achieved by using a polymerization temperature of 150°C while polymerization at higher temperatures lowered both the flexural and tensile properties due to generation of more internal microvoids, as well as, decreased crystallinity of the matrix. In addition, it was found that optimal mechanical properties of the composites could be obtained using 2 wt% aminopropyltriethoxysilane (APS) coupling agent while higher APS concentrations negatively impacted the interfacial adhesion, resulting in lower mechanical properties. POLYM. COMPOS., 40:1104–1116, 2019. © 2018 Society of Plastics Engineers

     
    more » « less
  4. ( , Academic journal of civil engireering)
    Natural fiber-reinforced polymers are currently used in a variety of low- to high-performance applications in the automotive, packaging, and construction industries. Previous studies have demonstrated that natural fibers (e.g., flax, hemp) exhibit good tensile mechanical properties and have positive environmental and economic attributes such as low cost, rapid renewability, and worldwide availability. However, natural fibers are inherently susceptible moisture-induced changes in physical and mechanical properties, which can be unfavorable for in-service use. This study illustrates how a micromechanics-based modelling approach can be used to help facilitate durability design and mitigate the deleterious effects of freeze-thaw deterioration in wood-plastic composites (WPCs). The model described in this study predicts the critical fiber volume fraction (V_fcrit) at which damage to the composite will occur under certain environmental conditions for different WPC formulations of hardwood and softwood fiber reinforcement and polymer matrix types. As expected, the results show that V_fcrit increases (a positive result) as anticipated in situ moisture content decreases. In addition, results suggest that fiber packing distribution directly influences V_fcrit and that V_fcrit increases as the mechanical properties of the polymer matrix increase. In sum, the study demonstrates how predictive modeling can be applied during the design phase to ensure the durability of WPCs. 
    more » « less
  5. ; ; ( , Rapid Prototyping Journal)
    null (Ed.)
    Purpose This paper aims to summarize the up-to-date research performed on combinations of various biofibers and resin systems used in different three-dimensional (3D) printing technologies, including powder-based, material extrusion, solid-sheet and liquid-based systems. Detailed information about each process, including materials used and process design, are described, with the resultant products’ mechanical properties compared with those of 3D-printed parts produced from pure resin or different material combinations. In most processes introduced in this paper, biofibers are beneficial in improving the mechanical properties of 3D-printed parts and the biodegradability of the parts made using these green materials is also greatly improved. However, research on 3D printing of biofiber-reinforced composites is still far from complete, and there are still many further studies and research areas that could be explored in the future. Design/methodology/approach The paper starts with an overview of the current scenario of the composite manufacturing industry and then the problems of advanced composite materials are pointed out, followed by an introduction of biocomposites. The main body of the paper covers literature reviews of recently emerged 3D printing technologies that were applied to biofiber-reinforced composite materials. This part is classified into subsections based on the form of the starting materials used in the 3D printing process. A comprehensive conclusion is drawn at the end of the paper summarizing the findings by the authors. Findings Most of the biofiber-reinforced 3D-printed products exhibited improved mechanical properties than products printed using pure resin, indicating that biofibers are good replacements for synthetic ones. However, synthetic fibers are far from being completely replaced by biofibers due to several of their disadvantages including higher moisture absorbance, lower thermal stability and mechanical properties. Many studies are being performed to solve these problems, yet there are still some 3D printing technologies in which research concerning biofiber-reinforced composite parts is quite limited. This paper unveils potential research directions that would further develop 3D printing in a sustainable manner. Originality/value This paper is a summary of attempts to use biofibers as reinforcements together with different resin systems as the starting material for 3D printing processes, and most of the currently available 3D printing techniques are included herein. All of these attempts are solutions to some principal problems with current 3D printing processes such as the limit in the variety of materials and the poor mechanical performance of 3D printed parts. Various types of biofibers are involved in these studies. This paper unveils potential research directions that would further widen the use of biofibers in 3D printing in a sustainable manner. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email