skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Water dissociation and association on mirror twin boundaries in two-dimensional MoSe 2 : insights from density functional theory calculations
Title: Water dissociation and association on mirror twin boundaries in two-dimensional MoSe 2 : insights from density functional theory calculations
The adsorption and dissociation of water molecules on two-dimensional transition metal dichalcogenides (TMDs) is expected to be dominated by point defects, such as vacancies, and edges. At the same time, the role of grain boundaries, and particularly, mirror twinboundaries (MTBs), whose concentration in TMDs can be quite high, is not fully understood. Using density functional theory calculations, we investigate the interaction of water, hydroxyl groups, as well as oxygen and hydrogen molecules with MoSe 2 monolayers when MTBs of various types are present. We show that the adsorption of all species on MTBs is energetically favorable as compared to that on the basal plane of pristine MoSe 2 , but the interaction with Se vacancies is stronger. We further assess the energetics of various surface chemical reactions involving oxygen and hydrogen atoms. Our results indicate that water dissociation on the basal plane should be dominated by vacancies even when MTBs are present, but they facilitate water clustering through hydroxyl groups at MTBs, which can anchor water molecules and give rise to the decoration of MTBs with water clusters. Also, the presence of MTBs affects oxygen reduction reaction (ORR) on the MoSe 2 monolayer. Unlike Se vacancies which inhibit ORR due to a high overpotential, it is found that the ORR process on MTBs is more efficient, indicating their important role in the catalytic activity of MoSe 2 monolayer and likely other TMDs.  more » « less
Award ID(s):
2140038
PAR ID:
10337797
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Nanoscale Advances
Volume:
3
Issue:
24
ISSN:
2516-0230
Page Range / eLocation ID:
6992 to 7001
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Nanoscale)
    null (Ed.)
    Water adsorption on transition metal dichalcogenides and other 2D materials is generally governed by weak van der Waals interactions. This results in a hydrophobic character of the basal planes, and defects may play a significant role in water adsorption and water cluster nucleation. However, there is a lack of detailed experimental investigations on water adsorption on defective 2D materials. Here, by combining low-temperature scanning tunneling microscopy (STM) experiments and density functional theory (DFT) calculations, we study in that context the well-defined mirror twin boundary (MTB) networks separating mirror-grains in 2D MoSe 2 . These MTBs are dangling bond-free extended crystal modifications with metallic electronic states embedded in the 2D semiconducting matrix of MoSe 2 . Our DFT calculations indicate that molecular water also interacts similarly weak with these MTBs as with the defect-free basal plane of MoSe 2 . However, in low temperature STM experiments, nanoscopic water structures are observed that selectively decorate the MTB network. This localized adsorption of water is facilitated by functionalization of the MTBs by hydroxyls formed by dissociated water. Hydroxyls may form by dissociating of water at undercoordinated defects or adsorbing of radicals from the gas phase in the UHV chamber. Our DFT analysis indicates that the metallic MTBs adsorb these radicals much stronger than on the basal plane due to charge transfer from the metallic states into the molecular orbitals of the OH groups. Once the MTBs are functionalized with hydroxyls, molecular water can attach to them, forming water channels along the MTBs. This study demonstrates the role metallic defect states play in the adsorption of water even in the absence of unsaturated bonds that have been so far considered to be crucial for adsorption of hydroxyls or water. 
    more » « less
  2. ; (, Communications Chemistry)
    Abstract The valorization of carbon oxides on metal/metal oxide catalysts has been extensively investigated because of its ecological and economical relevance. However, the ambiguity surrounding the active sites in such catalysts hampers their rational development. Here, in situ infrared spectroscopy in combination with isotope labeling revealed that CO molecules adsorbed on Ti 3+ and Cu + interfacial sites in Cu/TiO 2 gave two disparate carbonyl peaks. Monitoring each of these peaks under various conditions enabled tracking the adsorption of CO, CO 2 , H 2, and H 2 O molecules on the surface. At room temperature, CO was initially adsorbed on the oxygen vacancies to produce a high frequency CO peak, Ti 3+ −CO. Competitive adsorption of water molecules on the oxygen vacancies eventually promoted CO migration to copper sites to produce a low-frequency CO peak. In comparison, the presence of gaseous CO 2 inhibits such migration by competitive adsorption on the copper sites. At temperatures necessary to drive CO 2 and CO hydrogenation reactions, oxygen vacancies can still bind CO molecules, and H 2 spilled-over from copper also competed for adsorption on such sites. Our spectroscopic observations demonstrate the existence of bifunctional active sites in which the metal sites catalyze CO 2 dissociation whereas oxygen vacancies bind and activate CO molecules. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract Non‐volatile resistive switching (NVRS) is a widely available effect in transitional metal oxides, colloquially known as memristors, and of broad interest for memory technology and neuromorphic computing. Until recently, NVRS was not known in other transitional metal dichalcogenides (TMDs), an important material class owing to their atomic thinness enabling the ultimate dimensional scaling. Here, various monolayer or few‐layer 2D materials are presented in the conventional vertical structure that exhibit NVRS, including TMDs (MX2, M=transitional metal, e.g., Mo, W, Re, Sn, or Pt; X=chalcogen, e.g., S, Se, or Te), TMD heterostructure (WS2/MoS2), and an atomically thin insulator (h‐BN). These results indicate the universality of the phenomenon in 2D non‐conductive materials, and feature low switching voltage, large ON/OFF ratio, and forming‐free characteristic. A dissociation–diffusion–adsorption model is proposed, attributing the enhanced conductance to metal atoms/ions adsorption into intrinsic vacancies, a conductive‐point mechanism supported by first‐principle calculations and scanning tunneling microscopy characterizations. The results motivate further research in the understanding and applications of defects in 2D materials. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Energy & Environmental Science)
    Metal-free carbon materials have emerged as cost-effective and high-performance catalysts for the production of hydrogen peroxide (H 2 O 2 ) through the two-electron oxygen reduction reaction (ORR). Here, we show that 3D crumpled graphene with controlled oxygen and defect configurations significantly improves the electrocatalytic production of H 2 O 2 . The crumpled graphene electrocatalyst with optimal defect structures and oxygen functional groups exhibits outstanding H 2 O 2 selectivity of 92–100% in a wide potential window of 0.05–0.7 V vs. reversible hydrogen electrode (RHE) and a high mass activity of 158 A g −1 at 0.65 V vs. RHE in alkaline media. In addition, the crumpled graphene catalyst showed an excellent H 2 O 2 production rate of 473.9 mmol gcat −1 h −1 and stability over 46 h at 0.4 V vs. RHE. Moreover, density functional theory calculations revealed the role of the functional groups and defect sites in the two-electron ORR pathway through the scaling relation between OOH and O adsorption strengths. These results establish a structure-mechanism-performance relationship of functionalized carbon catalysts for the effective production of H 2 O 2 . 
    more » « less
  5. ; ; ; ; (, Journal of the American Chemical Society)
    Hydrogen spillover, a poorly understood adsorption phenomenon, plays an important role in hydrogen storage, catalytic hydrogenation, and energy conversion processes. While widely invoked to explain anomalous observations, the fundamental mechanisms underlying spillover remain under debate, particularly regarding the influence of surface adsorbates, such as water. In this study, we investigate how strongly adsorbed water (SAW) impacts hydrogen spillover (H*) on Au/TiO2 catalysts using in situ Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). By carefully correlating IR and TGA data, we quantify the relationship between water coverage and spillover. At low to moderate temperatures (<200 °C), SAW resides primarily on Ti Lewis acid sites, while hydrogen spillover is associated with surface hydroxyl groups. Our findings reveal that even though H* and SAW do not directly compete for surface adsorption sites, SAW suppresses H*. Van’t Hoff studies indicate SAW suppresses spillover by modifying the surface entropy of the titania, presumably by perturbing multiple proton transfer equilibria across the support surface. Maintaining constant water and hydroxyl coverage over a modest temperature range allowed for the determination of reliable thermodynamic parameters for hydrogen spillover on titania, yielding a slightly exothermic heat of adsorption (−7 ± 1 kJ/mol H*). These insights highlight the indirect role that surface water can play in catalytic reactions involving hydrogen spillover and offer a new perspective on catalyst design and optimization for hydrogen-involved reactions. This work also highlights the importance of considering the entropy of oxide surfaces in understanding catalysis over oxides. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email