This paper describes the numerical study of oscillating circular cylinders with rigid splitter plates of different lengths. These geometries may be used as disturbance generators for the study of unsteady airfoils and wings operating in highly vortical flowfields. It has been shown that cylinders undergoing forced rotational oscillations at their natural shedding frequency can produce wakes with minimal deviation in cycle-to-cycle vortex strength and position. Adding a splitter plate allows these deviations to be reduced even further. We present cases for oscillating cylinders having splitter-plate lengths up to [Formula: see text] at a Reynolds number of 7600. Frequencies are maintained at the natural shedding frequency, and a rotational amplitude of 45 deg is used. Numerical simulations are performed using a two-dimensional unsteady Reynolds-averaged Navier–Stokes (RANS) code. Results are presented in the form of vorticity contours and cycle-averaged velocity profiles, as well as the dominant frequencies of cylinder lift force and downstream velocity angles. The results show that splitter-plate lengths shorter than [Formula: see text] adversely affect the ability to generate a coherent vortex wake due to shear layer roll-up near the trailing edge of the plate. Splitter plates longer than [Formula: see text] produced a reverse von Kármán wake with consistent cycle-to-cycle vortex shedding.
- Award ID(s):
- 1652583
- PAR ID:
- 10338828
- Date Published:
- Journal Name:
- Journal of Renewable and Sustainable Energy
- Volume:
- 14
- Issue:
- 3
- ISSN:
- 1941-7012
- Page Range / eLocation ID:
- 033304
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This work experimentally investigates the pressure-driven flow of a pure Newtonian fluid through three-dimensional (3D) porous media models. The porous media model consists of square arrays of rods that also could be interpreted as a periodic tandem rod arrangement. We employed a time-resolved three-dimensional particle tracking velocimetry (3D Shake-the-Box) technique for a range of Reynolds numbers [Formula: see text] to observe flow structures and vortex formation between the rods in porous media structures with different porosities of [Formula: see text] which corresponds to the spacing ratio of [Formula: see text], where L is the distance between the centers of the rods, and D is the diameter of the rods. For all the examined cases, we further analyzed the effect of the Reynolds number and the spacing ratio on the instantaneous and averaged patterns of velocity, vorticity, and the other flow parameters after obtaining the two-dimensional velocity fields using the bin-averaging method. We observed both symmetrical and asymmetrical patterns of structure and recirculation regions between the rods depending on the Reynolds number and spacing ratio. Increasing the Reynolds number reduced the symmetrical patterns of flow structures with respect to the centerline of the gap region, while the spacing ratio was randomly affecting the symmetry degree. Vortex shedding was considerable for the two examined high Reynolds numbers of Re = 444 and Re = 890 behind the upstream rod as the porosity increased. The backward movement of the reattachment point has been observed by increasing the Reynolds number.more » « less
-
The wake flow past an axisymmetric body of revolution at a diameter-based Reynolds number
is investigated via a direct numerical simulation. The study is focused on identification of coherent vortical motions and the dominant frequencies in this flow. Three dominant coherent motions are identified in the wake: the vortex shedding motion with the frequency of$Re=u_{\infty }D/\nu =5000$ , the bubble pumping motion with$St=fD/u_{\infty }=0.27$ , and the very-low-frequency (VLF) motion originated in the very near wake of the body with the frequency$St=0.02$ –$St=0.002$ . The vortex shedding pattern is demonstrated to follow a reflectional symmetry breaking mode, whereas the vortex loops are shed alternatingly from each side of the vortex shedding plane, but are subsequently twisted and tangled, giving the resulting wake structure a helical spiraling pattern. The bubble pumping motion is confined to the recirculation region and is a result of a Görtler instability. The VLF motion is related to a stochastic destabilisation of a steady symmetric mode in the near wake and manifests itself as a slow, precessional motion of the wake barycentre. The VLF mode with$0.005$ is also detectable in the intermediate wake and may be associated with a low-frequency radial flapping of the shear layer.$St=0.005$ -
This experimental study investigates the fluid–structure–surface interactions of a flexibly mounted rigid plate in axial flow, focusing on flow-induced vibration (FIV) response and vortex dynamics of the system within a reduced velocity range of
, corresponding to a Reynolds number range of$U^*=0.29\unicode{x2013}8.73$ . The plate, with one and two degrees of freedom (DoFs) for pitching and plunging oscillations, is examined at various submerged heights near the free surface. Results show that the plate exhibits divergence instability at low reduced velocities in both 1DoF and 2DoF systems. As the flow velocity surpasses a critical reduced velocity, periodic limit-cycle oscillations (LCOs) occur, increasing in amplitude until a second critical reduced velocity is reached. Beyond this point, LCOs are suppressed, and the plate experiences an increased static divergence angle with further flow velocity increase. The proximity to the free surface significantly influences the FIV response, with decreasing submerged heights leading to reduced LCO amplitudes and a shift of instabilities to higher reduced velocities. Vortex dynamics are analysed using time-resolved volumetric particle tracking velocimetry and hydrogen bubble flow visualisation. The analysis reveals disruptions in the symmetric flow field near the free surface, causing elongation and fragmentation of vortices in the wake of the plate, as well as vortex coupling. Proper orthogonal decomposition (POD) identifies dominant coherent structures, including leading-edge and trailing-edge vortices, captured in the first and second paired modes. On the other hand, higher POD modes capture the interaction of vortices in the wake and near the free surface.$Re=518\unicode{x2013}15\,331$ -
High-resolution large eddy simulations and complementary laboratory experiments using particle image velocimetry were performed to provide a detailed quantitative assessment of flow response to gaps in cylinder arrays. The base canopy consists of a dense array of emergent rigid cylinders placed in a regular staggered pattern. The gaps varied in length from [Formula: see text] to 24, in intervals of 4 d, where d is the diameter of the cylinders. The analysis was performed under subcritical conditions with Froude numbers [Formula: see text] and bulk Reynolds numbers [Formula: see text]. Results show that the gaps affect the flow statistics at the upstream and downstream proximity of the canopy. The affected zone was [Formula: see text] for the mean flow and [Formula: see text] for the second-order statistics. Dimensionless time-averaged streamwise velocity within the gap exhibited minor variability with gap spacing; however, in-plane turbulent kinetic energy, k, showed a consistent decay rate when normalized with that at [Formula: see text] from the beginning of the gap. The emergent canopy acts as a passive turbulence generator for the gap flow for practical purposes. The streamwise dependence of k follows an exponential trend within [Formula: see text] and transitions to a power-law at [Formula: see text]. The substantially lower maximum values of k within the gap compared to k within the canopy evidence a limitation of gap measurements representative of canopy flow statistics. We present a base framework for estimating representative in-canopy statistics from measurements in the gap.more » « less