An official website of the United States government
Bi2NiMnO6(BNMO) epitaxial thin films with a layered supercell (LSC) structure have emerged as a promising single‐phase multiferroic material recently. Because of the required strain state for the formation of the LSC structures, most of the previous BNMO films are demonstrated on rigid oxide substrates such as SrTiO3and LaAlO3. Here, the potential of BNMO films grown on muscovite mica substrates via van der Waals epitaxy, spotlighting their suitability for cutting‐edge flexible device applications is delved. Comprehensive scanning transmission electron microscopy/energy‐dispersive X‐ray analyses reveal a layered structure in the BNMO film and a pristine interface with the mica substrate, indicating high‐quality deposition and minimal interfacial defects. Capitalizing on its unique property of easily cleavable layers due to weak van der Waals forces in mica substrates, flexible BNMO/mica samples are fixed. A standout feature of the BNMO film grown on mica substrate is its consistent multiferroic properties across varied mechanical conditions. A novel technique is introduced for thinning the mica substrate and subsequent transfer of the sample, with post‐transfer analyses validating the preserved structural and magnetic attributes of the film. Overall, this study illuminates the resilient multiferroic properties of BNMO films on mica, offering promising avenues for their integration for next‐generation flexible electronics.
more »
« less
Epitaxial (110)-oriented La 0.7 Sr 0.3 MnO 3 film directly on flexible mica substrate
Abstract Manufacture and characterizations of perovskite-mica van der Waals epitaxy heterostructures are a critical step to realize the application of flexible devices. However, the fabrication and investigation of the van der Waals epitaxy architectures grown on mica substrates are mainly limited to (111)-oriented perovskite functional oxide thin films up to now and buffer layers are highly needed. In this work, we directly grew La 0.7 Sr 0.3 MnO 3 (LSMO) thin films on mica substrates without using any buffer layer. By the characterizations of x-ray diffractometer and scanning transmission electron microscopy, we demonstrate the epitaxial growth of the (110)-oriented LSMO thin film on the mica substrate. The LSMO thin film grown on the mica substrate via van der Waals epitaxy adopts domain matching epitaxy instead of conventional lattice matching epitaxy. Two kinds of domain matching relationships between the LSMO thin film and mica substrate are sketched by Visualization for Electronic and STructural Analysis software and discussed. A decent ferromagnetism retains in the (110)-oriented LSMO thin film. Our work demonstrates a new pathway to fabricate (110)-oriented functional oxide thin films on flexible mica substrates directly.
more »
« less
- PAR ID:
- 10341594
- Date Published:
- Journal Name:
- Journal of Physics D: Applied Physics
- Volume:
- 55
- Issue:
- 22
- ISSN:
- 0022-3727
- Page Range / eLocation ID:
- 224002
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The growth of wafer‐scale van der Waals (vdW) thin films and heterostructures by molecular beam epitaxy (MBE) is important for future applications in quantum technologies, next‐generation optoelectronic devices, and fundamental physics investigations. When grown using co‐deposition methods that are typically used for compound semiconductor MBE, vdW materials typically show a high density of structural defects, including twin or antiphase domains, spiral growth, and pyramidal growth. These defects are caused by the relatively weak film/substrate interaction and/or the poor wettability of typical substrates by many vdW materials. These difficulties can be mitigated using a multi‐step growth procedure in which growth stages, including nucleation and coalescence, can be rigorously controlled, resulting in high‐quality deposition of vdW thin films. This article will describe a general recipe for the growth of highly‐crystalline wafer‐scale vdW thin films by MBE.more » « less
-
Epitaxial growth of complex oxides on large-area wafers, such as sapphire and silicon, represents a key step toward scalable oxide device production. Solid phase epitaxy allows the synthesis of γ-Al2O3 on α-Al2O3 and provides a template with a matched lattice constant and appropriate cubic symmetry for subsequent heteroepitaxial growth of perovskite complex oxides. Nb-doped SrTiO3 thin films were deposited epitaxially on (111)-oriented γ-Al2O3 intermediate layers on (0001) c-axis-oriented sapphire α-Al2O3 crystals using pulsed laser deposition. The Nb:SrTiO3 thin films with a thickness of 53 nm, grown at 700 °C on γ-Al2O3, reached fully relaxed lattice parameters and were epitaxially oriented with respect to the substrate. Nb:SrTiO3 layers deposited using identical deposition conditions directly on α-Al2O3, without the γ-Al2O3 intermediate layer, were polycrystalline. The sheet conductivity of Nb:SrTiO3 grown on γ-Al2O3/α-Al2O3 is more than ten times higher than that of Nb:SrTiO3 grown directly on α-Al2O3 without the γ-Al2O3 layer. The results point to new directions for the integration of (111)-oriented pseudocubic perovskite complex oxides and the integration of epitaxial complex oxides over larger areas using α-Al2O3 single-crystal substrates.more » « less
-
We investigate the amorphous-to-crystalline transformation of antimony selenide (Sb2Se3) on UHV-prepared GaAs (001) substrates. In the bulk orthorhombic form, Sb2Se3 is a layered quasi-1D semiconductor with highly anisotropic properties of interest for optical and electronic devices. We find that an amorphous layer deposited by molecular beam epitaxy annealed at or above 230 °C yields a textured-epitaxial structure among some randomly oriented domains. The textured-epitaxial Sb2Se3 grains are oriented with the covalently bonded “1D axis” constrained in-plane to GaAs [110] and with multiple van der Waals (hk0) orientations out-of-plane. The same texture was achieved exclusively without randomly oriented grains using continuous-wave laser radiation, highlighting the use of thermal and optical methods to yield anisotropic crystalline Sb2Se3 films directly from the amorphous phase. Polarized reflectance and polarized microscopy confirm the unique state of in-plane birefringence in the crystallized thin film. Overall, we show that solid-phase heteroepitaxy provides additional pathways to the integration of low-symmetry chalcogenide semiconductors for demanding applications where the inherent anisotropy needs to be preserved.more » « less
-
Epitaxial untwinned SrRuO3 thin films were grown on (110)-oriented DyScO3 substrates by molecular-beam epitaxy. We report an exceptional sample with a residual resistivity ratio (RRR), ρ [300 K]/ρ [4 K] of 205 and a ferromagnetic Curie temperature, TC, of 168.3 K. We compare the properties of this sample to other SrRuO3 films grown on DyScO3(110) with RRRs ranging from 8.8 to 205, and also compare it to the best reported bulk single crystal of SrRuO3. We determine that SrRuO3 thin films grown on DyScO3(110) have an enhanced TC as long as the RRR of the thin film is above a minimum electrical quality threshold. This RRR threshold is about 20 for SrRuO3. Films with lower RRR exhibit TCs that are significantly depressed from the intrinsic strain-enhanced value.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1088/1361-6463/ac570d
