More Like this

1. A Combined Heat- and Power-Driven Membrane Capacitive Deionization System

   https://doi.org/10.1021/acs.estlett.7b00395  

   Zhang, Jiankai; Hatzell, Kelsey B.; Hatzell, Marta C. (November 2017, Environmental Science & Technology Letters)
2. A multi-scale energy systems engineering approach to residential combined heat and power systems

   https://doi.org/10.1016/j.compchemeng.2016.10.015  

   Diangelakis, Nikolaos A.; Pistikopoulos, Efstratios N. (July 2017, Computers & Chemical Engineering)
3. Integration of Design, Scheduling, and Control of Combined Heat and Power Systems: A Multiparametric Programming Based Approach

   https://doi.org/10.1016/B978-0-444-64241-7.50104-X  

   Burnak, B Katz (July 2018, Computer-aided chemical engineering)
4. Combined Whistler Heat Flux and Anisotropy Instabilities in Solar Wind

   https://doi.org/10.1029/2019JA027380  

   Sarfraz, M.; Yoon, P. H. (January 2020, Journal of Geophysical Research: Space Physics)

   null (Ed.)
5. Combined design and control optimization of heat pumps in residential buildings

   https://doi.org/10.1016/j.energy.2025.136317  

   Vadali, Phani Arvind; Krarti, Moncef (July 2025, Energy)

   Elsevier (Ed.)

   Electrification of buildings through deployment of heat pumps requires innovative design and control strategies to reduce their energy demands on the grid. Instead of the sequential approach of optimizing the design specifications and control strategies, this paper considers the benefits of the combined and simultaneous optimization of design capacities and control settings for heat pumps when specified for US residential buildings. A Genetic Algorithm optimizer is used to simultaneously adjust the main and supplementary coil capacities for the heat pump as well as the indoor temperature setpoints to minimize annual heating and cooling energy needs as well as occupant thermal discomfort levels. In comparison to design and control baselines, it is found that simultaneous optimization can achieve 21% and 7% reductions in heating and cooling annual energy consumption for the cases of variable speed and single speed heat pumps. Moreover, the analysis results indicate that these reductions are nearly double the savings obtained when design only and control only based optimizations are considered. The presented combined design and control optimization approach could potentially provide an effective paradigm shift in specifying heat pump systems for residential buildings. 

   more » « less