An official website of the United States government
Eshelby’s equivalent inclusion method (EIM) has been formulated to solve harmonic heat transfer problems of an infinite or semi-infinite domain containing an inclusion or inhomogeneity. For the inclusion problem, the heat equation is reduced to a modified Helmholtz’s equation in the frequency domain through the Fourier transform, and the harmonic Eshelby’s tensor is derived from the domain integrals of the corresponding Green’s function in the form of Helmholtz’s potential. Using the convolution property of the Fourier space, Helmholtz’s potential with polynomial-form source densities is integrated over an ellipsoidal inclusion, which is reduced to a one-dimensional integral for spheroids and an explicit, exact expression for spheres. The material mismatch in the inhomogeneity problem is simulated by continuously distributed eigen-fields, namely, the eigen-temperature-gradient (ETG) and eigen-heat-source (EHS) for thermal conductivity and specific heat, respectively. The proposed EIM formulation is verified by the conventional boundary integral method with the harmonic Green’s function and multi-domain interfacial continuity, and the accuracy and efficacy of the solution are discussed under different material and load settings.
more »
« less
The Green’s Function-Based Thermal Analysis of a Spherical Geothermal Tank in a Semi-Infinite Domain
Abstract The Green’s function of a bimaterial infinite domain with a plane interface is applied to thermal analysis of a spherical underground heat storage tank. The heat transfer from a spherical source is derived from the integral of the Green’s function over the spherical domain. Because the thermal conductivity of the tank is generally different from soil, the Eshelby’s equivalent inclusion method (EIM) is used to simulate the thermal conductivity mismatch of the tank from the soil. For simplicity, the ground with an approximately uniform temperature on the surface is simulated by a bimaterial infinite domain, which is perfectly conductive above the ground. The heat conduction in the ground is investigated for two scenarios: First, a steady-state uniform heat flux from surface into the ground is considered, and the heat flux is disturbed by the existence of the tank due to the conductivity mismatch. A prescribed temperature gradient, or an eigen-temperature gradient, is introduced to investigate the local temperature field in the neighborhood of the tank. Second, when a temperature difference exists between the water in the tank and soil, the heat transfer between the tank and soil depends on the tank size, conductivity, and temperature difference, which provide a guideline for heat exchange design for the tank size. The modeling framework can be extended to two-dimensional cases, periodic, or transient heat transfer problems for geothermal well operations. The corresponding Green’s functions are provided for those applications.
more »
« less
- PAR ID:
- 10345515
- Date Published:
- Journal Name:
- Journal of Applied Mechanics
- Volume:
- 89
- Issue:
- 7
- ISSN:
- 0021-8936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
McCartney, J.S.; Tomac, I. (Ed.)Energy piles are one of the best candidates to harvest shallow geothermal energy. Continuing harvesting and rejecting thermal energy from/to the ground may permanently change the soil temperature and consequently, may lead to different soil resistance parameters. Therefore, careful prediction of soil temperature variation close to energy geostructures is needed. This paper investigates the various parameters of heat source and soil media on transient heat transport in unsaturated soils. Green’s function and the method of separation of variables are employed to analytically analyze the transient heat transfer in the vicinity of energy piles. Results indicate that although higher heat flux increases the soil temperature surrounding a heat source, it has negligible effect on thermal influence zone where the soil temperature varies. In contrast, higher thermal diffusivity results in lower soil temperature close to a heat source while it increases the thermal influence zone.more » « less
-
Abstract A thermo‐time domain reflectometry (thermo‐TDR) sensor combines a heat‐pulse sensor with a TDR waveguide to simultaneously measure coupled processes of water, heat, and solute transfer. The sensor can provide repeated in situ measurements of several soil state properties (temperature, soil water content, and ice content), thermal properties (thermal diffusivity, thermal conductivity, heat capacity), and electromagnetic properties (dielectric constant and bulk electrical conductivity) with minimal soil disturbance. Combined with physical or empirical models, structural indicators, such as bulk density and air‐filled porosity, can be derived from measured soil thermal and electrical properties. Successful applications are available to determine fine‐scale heat, water, and vapor fluxes with thermo‐TDR sensors. Applications of thermo‐TDR sensors in complicated scenarios, such as heterogeneous root zones and saline environments, are also possible. Therefore, the multi‐functional uses of thermo‐TDR sensors are invaluable for in situ observations of several soil physical properties and processes in critical zone soils.more » « less
-
Abstract Improved modeling of permafrost active layer freeze‐thaw plays a crucial role in understanding the response of the Arctic ecosystem to the accelerating warming trend in the region over the past decades. However, modeling the dynamics of the active layer at diurnal time scale remains challenging using the traditional models of freeze‐thaw processes. In this study, a physically based analytical model is formulated to simulate the thaw depth of the active layer under changing boundary conditions of soil heat flux. Conservation of energy for the active layer leads to a nonlinear integral equation of the thaw depth using a temperature profile approximated from the analytical solution of the heat transfer equation forced by ground heat flux. Temporally variable ground heat flux is estimated using non‐gradient models when field observations are not available. Validation of the proposed model conducted against field data obtained from three Arctic forest and tundra sites demonstrates that the model is able to simulate both thaw depth and soil temperature profiles accurately. The model has the potential to estimate regional variability of the thaw depth for permafrost related applications.more » « less
-
Abstract Soil heat flux plates (SHFPs) are widely used to measure soil heat flux (Gs). Gs is often underestimated by SHFPs (Gp). Although calibration methods are used, they are not always effective. The objective of this study is to evaluate the effectiveness of a field calibration method applied to various SHFPs installed in a full canopy maize field. A 5‐day measurement period with wet and dry soil conditions was used for calibration, while 80‐day and 60‐day measurement periods were used for evaluation. Uncorrected SHFP measured values (Gp) underestimated the actual reference Gs determined by the gradient method (Gs_grad) by 42%–64%. Gp values in the evaluation period were corrected (Gp_corr) by dividing them by the ratio of Gp/Gs_grad determined over the calibration period. After the correction, the Gp_corr agreed well with the Gs_grad, with Gp_corr/Gs_grad of four of six SHFPs being 0.90–1.01, improving to 74%–98%. The field calibration performed approximately the same with the wet and dry calibration periods, whether the calibration and evaluation periods were consecutive in time or had relatively long time intervals, indicating that this method accounted for almost all errors with SHFP. This is largely due to the slight variation in soil thermal conductivity and the linearity between soil temperature gradients from SHFP and the gradient method under relatively stable soil moisture conditions. This study deepens our understanding and improves the accuracy of soil heat flux measurements. Calibration of SHFPs under various land covers and weather conditions is warranted in future studies.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4054568
