skip to main content


Title: Conformal manufacturing of soft deformable sensors on the curved surface
Abstract Health monitoring of structures and people requires the integration of sensors and devices on various 3D curvilinear, hierarchically structured, and even dynamically changing surfaces. Therefore, it is highly desirable to explore conformal manufacturing techniques to fabricate and integrate soft deformable devices on complex 3D curvilinear surfaces. Although planar fabrication methods are not directly suitable to manufacture conformal devices on 3D curvilinear surfaces, they can be combined with stretchable structures and the use of transfer printing or assembly methods to enable the device integration on 3D surfaces. Combined with functional nanomaterials, various direct printing and writing methods have also been developed to fabricate conformal electronics on curved surfaces with intimate contact even over a large area. After a brief summary of the recent advancement of the recent conformal manufacturing techniques, we also discuss the challenges and potential opportunities for future development in this burgeoning field of conformal electronics on complex 3D surfaces.  more » « less
Award ID(s):
1933072
PAR ID:
10345631
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
International Journal of Extreme Manufacturing
Volume:
3
Issue:
4
ISSN:
2631-8644
Page Range / eLocation ID:
042001
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    3D printing, as an additive manufacturing technology, enables agile and free‐form fabrication of complex 3D structures relevant to industrial application. However, the 3D structure forming mechanisms in existing 3D printing technologies hinder and even prevent the manufacturing of ultra‐precision 3D metal parts, let alone parallel process manufacturing. A generic 3D electrochemical microprinting technology that allowed the “printing” of ultrahigh density, ultrahigh aspect ratio, and electronics quality 3D copper structures with microscale and even nanoscale precision in an ambient environment is developed here. Further on, the feedback‐controlled and self‐regulated “printing” mechanism was demonstrated to be capable of realizing parallel process 3D “printing” of an array of identical copper microstructures simultaneously, promising large‐scale 3D printing–based production of precision metal structures for broad applications in 3D integration of electronics and sensor systems.

     
    more » « less
  2. Recent advances in 3D printing have enabled the creation of novel 3D constructs and devices with an unprecedented level of complexity, properties, and functionalities. In contrast to manufacturing techniques developed for mass production, 3D printing encompasses a broad class of fabrication technologies that can enable 1) the creation of highly customized and optimized 3D physical architectures from digital designs; 2) the synergistic integration of properties and functionalities of distinct classes of materials to create novel hybrid devices; and 3) a biocompatible fabrication approach that facilitates the creation and co-integration of biological constructs and systems. Developing the ability to 3D print various classes of materials possessing distinct properties could enable the freeform generation of active electronics in unique functional, interwoven architectures. Here we are developing a multiscale 3D printing approach that enables the integration of diverse classes of materials to create a variety of 3D printed electronics and functional devices with active properties that are not easily achieved using standard microfabrication techniques. In one of the examples, we demonstrate an approach to prolong the gastric residence of wireless electronics to weeks via multimaterial three-dimensional design and fabrication. The surgical-free approach to integrate biomedical electronics with the human body can revolutionize telemedicine by enabling a real-time diagnosis and delivery of therapeutic agents. 
    more » « less
  3. Abstract

    Over the course of millions of years, nature has evolved to ensure survival and presents us with a myriad of functional surfaces and structures that can boast high efficiency, multifunctionality, and sustainability. What makes these surfaces particularly practical and effective is the intricate micropatterning that enables selective interactions with microstructures. Most of these structures have been realized in the laboratory environment using numerous fabrication techniques by tailoring specific surface properties. Of the available manufacturing methods, additive manufacturing (AM) has created opportunities for fabricating these structures as the complex architectures of the naturally occurring microstructures far exceed the traditional ways. This paper presents a concise overview of the fundamentals of such patterned microstructured surfaces, their fabrication techniques, and diverse applications. A comprehensive evaluation of micro fabrication methods is conducted, delving into their respective strengths and limitations. Greater emphasis is placed on AM processes like inkjet printing and micro digital light projection printing due to the intrinsic advantages of these processes to additively fabricate high resolution structures with high fidelity and precision. The paper explores the various advancements in these processes in relation to their use in microfabrication and also presents the recent trends in applications like the fabrication of microlens arrays, microneedles, and tissue scaffolds.

     
    more » « less
  4. Abstract

    Recent developments in stretchable electronics hold promise to advance wearable technologies for health monitoring. Emerging techniques allow soft materials to serve as substrates and packaging for electronics, enabling devices to comply with and conform to the body, unlike conventional rigid electronics. However, few stretchable electronic devices achieve the high integration densities that are possible using conventional substrates, such as printed rigid or flexible circuit boards. Here, a new manufacturing method is presented for wearable soft health monitoring devices with high integration densities. It is shown how to fabricate soft electronics on rigid carrier substrates using microfabrication techniques in tandem with strain relief features. Together, these make it possible to integrate a large variety of surface mount components in complex stretchable circuits on thin polymer substrates. The method is largely compatible with existing industrial manufacturing processes. The promise of these methods is demonstrated by realizing skin‐interfaced devices for multimodal physiological data capture via multiwavelength optoelectronic sensor arrays comprised of light emitting diodes and phototransistors. The devices provide high signal‐to‐noise ratio measurements of peripheral hemodynamics, illustrating the promise of soft electronics for wearable health monitoring applications.

     
    more » « less
  5. Additively manufactured electronics (AMEs), also known as printed electronics, are becoming increasingly important for the anticipated Internet of Things (IoT). This requires manufacturing technologies that allow the integration of various pure functional materials and devices onto different flexible and rigid surfaces. However, the current ink-based technologies suffer from complex and expensive ink formulation, ink-associated contaminations (additives/solvents), and limited sources of printing materials. Thus, printing contamination-free and multimaterial structures and devices is challenging. Here, a multimaterial additive nanomanufacturing (M-ANM) technique utilizing directed laser deposition at the nano and microscale is demonstrated, allowing the printing of lateral and vertical hybrid structures and devices. This M-ANM technique involves pulsed laser ablation of solid targets placed on a target carousel inside the printer head for in-situ generation of contamination-free nanoparticles, which are then guided via a carrier gas toward the nozzle and onto the surface of the substrate, where they are sintered and printed in real-time by a second laser. The target carousel brings a particular target in engagement with the ablation laser beam in predetermined sequences to print multiple materials, including metals, semiconductors, and insulators, in a single process. Using this M-ANM technique, various multimaterial devices such as silver/zinc oxide (Ag/ZnO) photodetector and hybrid silver/aluminum oxide (Ag/Al2O3) circuits are printed and characterized. The quality and versatility of our M-ANM technique offer a potential manufacturing option for emerging IoT. 
    more » « less