An official website of the United States government
We investigate a new series of precise ion-containing polyamide sulfonates (PAS x Li), where a short polar block precisely alternates with a non-polar block of aliphatic carbons ( x = 4, 5, 10, or 16) to form an alternating (AB) n multiblock architecture. The polar block includes a lithiated phenyl sulfonate in the polymer backbone. These PAS x Li polymers were synthesized via polycondensation of diaminobenzenesulfonic acid and alkyl diacids (or alkyl diacyl chlorides) with x -carbons, containing amide bonds at the block linkages. The para - and meta -substituted diaminobenzene monomers led to polymer analogs denoted p PAS x Li and m PAS x Li, respectively. When x ≤ 10, the para -substituted diamine monomer yields multiblock copolymers of a higher degree of polymerization than the meta -substituted isomer, due to the greater electron-withdrawing effect of the meta -substituted monomer. The PAS x Li polymers exhibit excellent thermal stability with less than 5% mass loss at 300 °C and the glass transition temperatures ( T g ) decrease with increasing hydrocarbon block length ( x ). Using the random phase approximation, the Flory–Huggins interaction parameter ( χ ) is determined for p PAS10Li, and χ (260 °C) ∼ 2.92 reveals high incompatibility between the polar ionic and non-polar hydrocarbon blocks. The polymer with the longest hydrocarbon block, p PAS16Li, is semicrystalline and forms well-defined nanoscale layers with a spacing of ∼2.7 nm. Relative to previously studied polyester multiblock copolymers, the amide groups and aromatic rings permit the nanoscale layers to persist up to 250 °C and thus increase the stability range for ordered morphologies in precise ion-containing multiblock copolymers.
more »
« less
Enhanced Li-Ion Transport through Selectively Solvated Ionic Layers of Single-Ion Conducting Multiblock Copolymers
We demonstrate enhanced Li+ transport through the selectively solvated ionic layers of a single-ion conducting polymer. The polymer is a precisely segmented ion-containing multiblock copolymers with well-defined Li+SO3– ionic layers between crystallized linear aliphatic 18-carbon blocks. X-ray scattering reveals that the dimethyl sulfoxide (DMSO) molecules selectively solvate the ionic layers without disrupting the crystallization of the polymer backbone. The amount of DMSO (∼21 wt %) calculated from the increased layer spacing is consistent with thermogravimetric analysis. The ionic conductivity through DMSO-solvated ionic layers is >104 times higher than in the dried state, indicating a significant enhancement of ion transport in the presence of this solvent. Dielectric relaxation spectroscopy (DRS) further elucidates the role of the structural relaxation time (τ) and the number of free Li+ (n) on the ionic conductivity (σ). Specifically, DRS reveals that the solvation of ionic domains with DMSO contributes to both accelerating the structural relaxation and the dissociation of ion pairs. This study is the initial demonstration that selective solvation is a viable design strategy to improve ionic conductivity in nanophase separated, single-ion conducting multiblock copolymers.
more »
« less
- PAR ID:
- 10346924
- Date Published:
- Journal Name:
- ACS Macro Letters
- ISSN:
- 2161-1653
- Page Range / eLocation ID:
- 1008 to 1013
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Solid-state single-ion conducting polymer electrolytes have drawn considerable interest for secondary lithium batteries due to their potential for high electrochemical stability and safety, but applications are limited by their low ionic conductivities. Specifically, poly(ethylene oxide) (PEO) based electrolytes have the highest reported Li + conductivities for these materials; however, their potential is limited due to the ion transport mechanism being coupled to segmental relaxations of the cation solvating polymer chain. To investigate the potential of single-ion conducting polymer electrolytes lacking polar matrices, we synthesized three para -polyphenylene-based, side-chain polymer electrolytes with various pendent anion chemistries (–SO 3 − , –PSI − , and –TFSI − ) with differing binding affinities to Li + . Compared with the previously reported lithium poly(4-styrenesulfonyl(trifluoromethylsulfonyl)imide) (LiPSTFSI), the side-chain polymers showed at least 3 orders of magnitude higher conductivity with the same –TFSI − anion (6.7 × 10 −6 S cm −1 compared with 1.2 × 10 −10 S cm −1 at 150 °C). We found that the side-chain electrolyte showed a dielectric relaxation dominated transport mechanism through use of dielectric spectroscopy analysis. The conductivity is highly dependent on the charge delocalization and size of the pendent anion, which provides a pathway forward for the engineering of polymeric ion conductors for electrochemical applications.more » « less
-
Maximizing ion conduction in single-ion-conducting ionomers is essential for their application in energy-related technologies such as Li-ion batteries. Understanding the anion chemical composition impacts on ion conduction offers new perspectives to maximize ion transport, since the current approach of lowering T g has apparently reached a limit (lowest T g ∼ 190 K, highest conductivity ∼10 −5 –10 −4 S cm −1 ). Here, a series of random ionomers are synthesized by copolymerizing poly(ethylene glycol)methacrylate with either sulfonylimide lithium methacrylate (MTLi) or sulfonate lithium methacrylate (MSLi) using reversible addition–fragmentation chain transfer (RAFT) polymerization. Li-Ion conduction and self-diffusion coefficients ( D Li + ) of the ionomers are characterized with dielectric relaxation spectroscopy (DRS) and pulsed-field-gradient (PFG) NMR diffusometry, respectively. Increasing ion content decreases the Li-ion conductivity and D Li + , as expected from the increased T g . Moreover, a considerably lower ionic conductivity and D Li + are observed for MSLi compared to MTLi at constant ion content and T g / T . As revealed from X-ray scattering, strong ion aggregation in MSLi results in much lower conductivity and D Li + compared with less aggregated MTLi based on the more delocalized sulfonylimide anion. These results emphasize the detrimental and molecularly specific role of ion aggregation in Li-ion conductivity, and highlight the necessity for minimizing ion aggregation via the rational choice of anion chemical composition.more » « less
-
Optimizing lithium-ion battery (LIB) electrolytes is essential for high-current applications such as electric vehicles, yet experimental techniques to characterize the complex structural dynamics within these electrolytes are limited. These dynamics are responsible for Li+ transport. In this study, we used ultrafast infrared spectroscopy to measure chemical exchange, spectral diffusion, and solvation structures across a wide range of lithium concentrations in propylene carbonate-based LiTFSI (lithium bis(trifluoromethanesulfonimide) electrolytes, with the CN stretch of phenyl selenocyanate as the long-lived vibrational probe. Phenyl selenocyanate is shown to be an excellent dynamical surrogate for propylene carbonate in Li+ solvation clusters. A strong correlation between exchange times and ionic conductivity was observed. This correlation and other observations suggest structural diffusion as the primary transport mechanism rather than vehicular diffusion. Additionally, spectral diffusion observables measured by the probe were directly linked to the de-solvation dynamics of the Li+ clusters, as supported by density functional theory and molecular dynamics simulations. These findings provide detailed molecular-level insights into LIB electrolytes’ transport dynamics and solvation structures, offering rational design pathways to advanced electrolytes for next-generation LIBs.more » « less
-
Decoupling the ion motion and segmental relaxation is significant for developing advanced solid polymer electrolytes with high ionic conductivity and high mechanical properties. Our previous work proposed a decoupled ion transport in a novel protein-based solid electrolyte. Herein, we investigate the detailed ion interaction/transport mechanisms through first-principles density functional theory (DFT) calculations in a vacuum space. Specifically, we study the important roles of charged amino acids from proteins. Our results show that the charged amino acids (i.e., Arg and Lys) can strongly lock anions (ClO4−). When locked at a proper position (determined from the molecular structure of amino acids), the anions can provide additional hopping sites and facilitate Li+ transport. The findings are supported from our experiments of two protein solid electrolytes, in which the soy protein (with plenty of charged amino acids) electrolyte shows much higher ionic conductivity and lower activation energy in comparison to the zein (lack of charged amino acids) electrolyte.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acsmacrolett.2c00288
