Abstract Amphibole is a common hydrous mineral in mantle rocks. To better understand processes leading to the formation of amphibole‐bearing peridotites and pyroxenites in the lithospheric mantle, we conducted experiments by juxtaposing a lherzolite against hydrous basaltic melts in Au‐Pd capsules. Two melts were examined, a basaltic andesite and a basalt, each containing 4 wt% of water. The experiments were run at 1200°C and 1 GPa for 3 or 12 h, and then cooled to 880°C and 0.8 GPa over 49 h. The reaction at 1200°C produced a melt‐bearing orthopyroxenite‐dunite sequence. Crystallization of the partially reacted melts during cooling lead to the formation of an amphibole‐bearing gabbronorite‐orthopyroxenite‐peridotite sequence. Orthopyroxene in the peridotite and orthopyroxenite has a poikilitic texture enclosing olivines and spinels. Amphibole in the peridotite occurs interstitial to olivine, orthopyroxene, clinopyroxene, and spinel. Comparisons of texture and mineral compositions in the experimental products with those from field observations allow a better understanding of hydrous melt‐rock reaction in the lithospheric mantle. Amphibole‐bearing pyroxenite veins (or dikes) can be formed in the lithospheric mantle or at the crust‐mantle boundary by interaction between hydrous melt and peridotite and subsequent crystallization. Hornblendite or amphibole gabbronorite can be formed in the veins when the flux of hydrous melt is high. Differences in reacting melt and peridotite compositions are responsible for the variation in amphibole composition in mantle xenoliths from different tectonic settings. The extent of melt‐rock reaction is a factor that control amphibole composition across the amphibole‐bearing vein and the host peridotite.
more »
« less
Decoupled Trace Element and Isotope Compositions Recorded in Orthopyroxene and Clinopyroxene in Composite Pyroxenite Veins from the Xiugugabu Ophiolite (SW Tibet)
Abstract Pyroxenite veins and dikes are commonly observed in the mantle section of ophiolites. Because of their mantle occurrence, these pyroxenites are free from crustal contamination and offer a unique opportunity for studying mantle compositions and melt–rock interaction processes. We conducted an integrated petrological and geochemical study of a suite of composite orthopyroxenite, websterite, and pyroxene-bearing dunite veins from the Xiugugabu ophiolite located on the western segment of Yarlung–Zangbo Suture Zone. The dunite is separated from the host peridotite by a layer of pyroxenite, forming a composite vein system. Systematic variations in major, minor, and trace element compositions in minerals across the composite veins are observed. Two generations of orthopyroxenes in the pyroxenites are characterized by high Mg#, low TiO2 concentrations, and depleted patterns of incompatible trace elements. Clinopyroxenes in the pyroxenites are characterized by high Mg#, low contents of TiO2 and Na2O, spooned shaped REE patterns, and a negative Zr anomaly. Through major and trace element modeling, we showed that both orthopyroxene and clinopyroxene were in equilibrium with melts with different compositions. This hypothesis is further confirmed by distinct initial Nd and Hf isotope ratios in the two pyroxenes. A model for the formation of composite pyroxenite veins is developed, whereby hydrous and silica-rich melts percolate along the margins of a dunite channel. The orthopyroxenite was formed by the reaction between a hydrous, silica-rich melt and the surrounding peridotite. The websterite is formed by reactive crystallization of a hybrid melt produced by mixing silica-rich melt and the melt formed by remelting of previously depleted peridotite in the deeper part of the mantle column. The extremely enriched Nd–Hf isotope compositions of the pyroxenite veins (εNd = −20.3 to +11.5 and εHf = −13.2 to +25.3, 125 million years ago) can be explained by the addition of ancient, recycled sediments to the mantle source in a supra-subduction setting. Based on the low-Cr# spinel in the Xiugugabu dunites (Cr# = 19–50) and the depleted nature of the parental melt of the Xiugugabu pyroxenites, we deduced that the formation of pyroxenites postdate the formation of the Xiugugabu ophiolite at ~125–130 Ma. Collectively, results from this study have provided support to the hypothesis that the Xiugugabu ophiolite experience a two-stage evolution, i.e., firstly formed in a mid-ocean ridge setting and subsequently modified in a supra subduction zone.
more »
« less
- Award ID(s):
- 1852088
- PAR ID:
- 10347891
- Date Published:
- Journal Name:
- Journal of Petrology
- Volume:
- 63
- Issue:
- 6
- ISSN:
- 0022-3530
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Understanding the petrological and geochemical processes shaping the Moho transition zone (MTZ) is crucial for advancing our knowledge of thermal and chemical exchanges between the oceanic crust and the residual upper mantle. In this study, we systematically investigate the MTZ outcropped within the Zedong ophiolite, located in the eastern part of the Yarlung-Tsangpo Suture Zone (YTSZ), with the aim of at reconstructing the magmatic processes responsible for generating the petrological Moho. The Zedong MTZ comprises a sequence of dunite, wehrlite, pyroxenite, and gabbro, with frequent occurrences of clinopyroxene-rich lithologies. Cyclicity within the MTZ sequences is characterized by the recurrence of olivine-rich intervals and the presence of zig-zag patterns in both major and trace elements of clinopyroxenes. Zircon Usingle bondPb dating on the Zedong gabbros supports the coeval formation of the Zedong ophiolite with other YTSZ ophiolites. Clinopyroxene in the Zedong MTZ follows a differentiation sequence characterized by an increase in contents of Al2O3 and TiO2, coupled with a decrease in Mg#. This differentiation sequence along with frequent occurrences of amphibole suggest the evolution of a primitive hydrous melt depleted in Al2O3, TiO2, and Na2O. The depleted Ndsingle bondHf isotopes and rare earth element patterns of the MTZ rocks indicate that their parental magmas originated from fluid-enhanced re-melting of a previously depleted mantle. Additionally, we proposed that the initiation of a new subduction zone results in the re-melting of the mantle peridotite, leading to the formation of primitive hydrous basaltic melts. The variable lithologies observed in the Zedong MTZ arise from fractional crystallization and repeated replenishment of hydrous melts.more » « less
-
We present computational modeling outcomes for bilithologic (peridotite and pyroxenite) mantle melting in divergent environments, considering equilibrium and disequilibrium porous flow melting of 0–50 % pyroxenite in thermal equilibrium with peridotite, potential temperatures of 1300 and 1400 °C, upwelling rates from 1–50 cm yr−1, maximum porosities of 0.1–2.0 %, and four compositions that span pyroxenite melting behavior. Basalt-like pyroxenites (G2) uniquely produce low (226Ra/230Th) and (231Pa/235U) with high (230Th/238U), but quantities greater than ~10 % produce anomalously thick crust, restricting their global abundance. Silica-deficient pyroxenite (M7-16 and MIX1G) melts are more moderate, but require chemical re-equilibration during transport to resemble global basalts, while hybrid lithologies (KG1) produce melts similar to those of peridotites. Uranium-series disequilibria in partial melts can also be decoupled from trace elements by radioactive decay in two-dimensional regimes. The mantle must thus contain multiple types of pyroxenite on a global scale, with melts traveling by complex networks and experiencing heterogeneous extents of chemical re-equilibration.more » « less
-
Abstract Arc magmatism is thought to be driven by peridotite melting in the mantle wedge. Yet pyroxenites are ubiquitous in the melting region beneath magmatic arcs. Because they typically have lower solidi temperatures and higher melt productivities compared to peridotite, pyroxenites likely play a significant role in magma generation. Here, we use the Zn/Fe ratios of a global database of Pliocene–Holocene primitive arc magmas to show that, as the crustal thickness of the overlying plate increases, so does the proportion of pyroxenite-derived melts relative to peridotite-derived melts. In fact, at arcs with crustal thicknesses >40 km, the majority of magmas are sourced from pyroxenite. Major and trace element geochemistry of pyroxenite melts is consistent with derivation from mafic magmas frozen in the mantle en route to the surface. We hypothesize that, as the thickness of the continental crust increases, the mantle wedge is displaced toward higher pressures and cooler temperatures, thereby lowering the extent of peridotite melting and allowing magmas sourced from the pyroxeniteveined mantle to dominate the arc budget.more » « less
-
Abstract Siliceous slab-derived partial melts infiltrate the sub-arc mantle and cause rock-melt reactions, which govern the formation of diverse primary arc magmas and lithological heterogeneities. The effect of bulk water content, composition of reactants, and nature of melt infiltration (porous versus channelized) on the rock-melt reactions at sub-arc conditions have been investigated by previous studies. However, the effect of multiple episodes of rock-melt reactions in such scenarios has not been investigated before. Here, we explore mantle wedge modifications through serial additions of hydrous-silicic slab partial melts and whether such a process may ultimately explain the origin of high-Mg# andesites found in arcs worldwide. A series of piston-cylinder experiments simulate a serial addition of silicic slab melts in up to three stages (I through III) at 3 GPa and 800–1050°C, using rock-melt proportions of 75–25 and 50–50. A synthetic KLB-1 and a natural rhyolite (JR-1) represented the mantle and the slab components, respectively. Right from the first rock-melt interaction, the peridotite mantle transforms into olivine-free mica-rich pyroxenites ± amphibole ± quartz/coesite in equilibrium with rhyolitic-hydrous melts (72–80 wt% SiO2 and 40–90 Mg#). The formation of olivine-free pyroxenite seems to be controlled by complex functions of T, P, rock-melt ratio, wedge composition, and silica activity of the slab-melt. Remarkably, the pyroxenites approach a melt-buffered state with progressive stages of rock-melt reactions, where those rhyolitic melts inherit and preserve the major (alkalis, Fe, Mg, Ca) and trace element slab-signature. Our results demonstrate that lithological heterogeneities such as pyroxenites formed as products of rock-melt reactions in the sub-arc mantle may function as melt ‘enablers,’ implying that they may act as pathways that enable the infiltrating melt to retain their slab signature without undergoing modification. Moreover, the density contrast between the products of rock-melt reaction (melts and residues) and the average mantle wedge (~150 to 400 kg/m3) may help forming instabilities and diapiric rise of the slab components into the mantle wedge. However, the fate of the primitive slab-melts seems to be associated with the length of the pathway of mantle interaction which explains the evident wide magma spectrum as well as their degree of slab garnet-signature dilution. This work and the existence of high-Mg# Mexican-trondhjemites indicates that almost pristine slab-melts can make their way up to crustal levels and contribute to the arc magma diversity.more » « less
An official website of the United States government

