An official website of the United States government
Abstract Arc magmatism is thought to be driven by peridotite melting in the mantle wedge. Yet pyroxenites are ubiquitous in the melting region beneath magmatic arcs. Because they typically have lower solidi temperatures and higher melt productivities compared to peridotite, pyroxenites likely play a significant role in magma generation. Here, we use the Zn/Fe ratios of a global database of Pliocene–Holocene primitive arc magmas to show that, as the crustal thickness of the overlying plate increases, so does the proportion of pyroxenite-derived melts relative to peridotite-derived melts. In fact, at arcs with crustal thicknesses >40 km, the majority of magmas are sourced from pyroxenite. Major and trace element geochemistry of pyroxenite melts is consistent with derivation from mafic magmas frozen in the mantle en route to the surface. We hypothesize that, as the thickness of the continental crust increases, the mantle wedge is displaced toward higher pressures and cooler temperatures, thereby lowering the extent of peridotite melting and allowing magmas sourced from the pyroxeniteveined mantle to dominate the arc budget.
more »
« less
This content will become publicly available on July 16, 2025
Uranium-series disequilibria in MORB, revisited: A systematic numerical approach to partial melting of a heterogeneous mantle
We present computational modeling outcomes for bilithologic (peridotite and pyroxenite) mantle melting in divergent environments, considering equilibrium and disequilibrium porous flow melting of 0–50 % pyroxenite in thermal equilibrium with peridotite, potential temperatures of 1300 and 1400 °C, upwelling rates from 1–50 cm yr−1, maximum porosities of 0.1–2.0 %, and four compositions that span pyroxenite melting behavior. Basalt-like pyroxenites (G2) uniquely produce low (226Ra/230Th) and (231Pa/235U) with high (230Th/238U), but quantities greater than ~10 % produce anomalously thick crust, restricting their global abundance. Silica-deficient pyroxenite (M7-16 and MIX1G) melts are more moderate, but require chemical re-equilibration during transport to resemble global basalts, while hybrid lithologies (KG1) produce melts similar to those of peridotites. Uranium-series disequilibria in partial melts can also be decoupled from trace elements by radioactive decay in two-dimensional regimes. The mantle must thus contain multiple types of pyroxenite on a global scale, with melts traveling by complex networks and experiencing heterogeneous extents of chemical re-equilibration.
more »
« less
- PAR ID:
- 10576054
- Publisher / Repository:
- Volcanica
- Date Published:
- Journal Name:
- Volcanica
- Volume:
- 7
- Issue:
- 2
- ISSN:
- 2610-3540
- Page Range / eLocation ID:
- 685 to 715
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hydrogen is a rapidly diffusing monovalent cation in nominally anhydrous minerals (NAMs, such as olivine, orthopyroxene, and clinopyroxene), which is potentially re-equilibrated during silicate melt-rock and aqueous fluid-rock interactions in massif and abyssal peridotites. We apply a 3D numerical diffusion modeling technique to provide first-order timescales of complete hydrogen re-equilibration in olivine, clinopyroxene, and orthopyroxene over the temperature range 600-1200°C. Model crystals are 1-3 mm along the c-axis and utilize H+ diffusion coefficients appropriate for Fe-bearing systems. Two sets of models were run with different boundary compositions: 1) “low-H models” are constrained by mineral-melt equilibrium partitioning with a basaltic melt that has 0.75 wt% H2O and 2) “high-H models,” which utilize the upper end of the estimated range of mantle water solubility for each phase. Both sets of models yield re-equilibration timescales that are identical and are fast for all phases at a given temperature. These timescales have strong log-linear trends as a function of temperature (R2 from 0.97 to 0.99) that can be used to calculate expected re-equilibration time at a given temperature and grain size. At the high end of the model temperatures (1000-1200°C), H+ completely re-equilibrates in olivine, orthopyroxene, and clinopyroxene within minutes to hours, consistent with previous studies. These short timescales indicate that xenolith NAM mantle water contents are likely to be overprinted prior to eruption. The models also resolve the decoupled water-trace element relationship in Southwest Indian Ridge peridotites, in which peridotite REE abundances are reproduced by partial melting models whereas the relatively high NAM H2O contents require later re-equilibration with melt. At temperatures of 600-800°C, which correspond to conditions of hydrothermal alteration of pyroxene to amphibole and talc, H+ re-equilibration typically occurs over a range of timescales spanning days to years. These durations are well within existing estimates for the duration of fluid flow in oceanic hydrothermal systems, suggesting that peridotite NAM water contents are susceptible to diffusive overprinting during higher temperature hydrothermal alteration. Thus, diffusion during aqueous fluid-rock interactions may also explain NAM H2O contents that are too high to reflect residues of melting. These relatively short timescales at low temperatures suggest that the origin of water contents measured in peridotite NAMs requires additional constraints on sample petrogenesis, including petrographic and trace element analyses. Our 3D model results also hint that H+ may diffuse appreciably during peridotite serpentinization, but diffusion coefficients at low temperature are unconstrained and additional experimental investigations are needed.more » « less
-
Understanding the petrological and geochemical processes shaping the Moho transition zone (MTZ) is crucial for advancing our knowledge of thermal and chemical exchanges between the oceanic crust and the residual upper mantle. In this study, we systematically investigate the MTZ outcropped within the Zedong ophiolite, located in the eastern part of the Yarlung-Tsangpo Suture Zone (YTSZ), with the aim of at reconstructing the magmatic processes responsible for generating the petrological Moho. The Zedong MTZ comprises a sequence of dunite, wehrlite, pyroxenite, and gabbro, with frequent occurrences of clinopyroxene-rich lithologies. Cyclicity within the MTZ sequences is characterized by the recurrence of olivine-rich intervals and the presence of zig-zag patterns in both major and trace elements of clinopyroxenes. Zircon Usingle bondPb dating on the Zedong gabbros supports the coeval formation of the Zedong ophiolite with other YTSZ ophiolites. Clinopyroxene in the Zedong MTZ follows a differentiation sequence characterized by an increase in contents of Al2O3 and TiO2, coupled with a decrease in Mg#. This differentiation sequence along with frequent occurrences of amphibole suggest the evolution of a primitive hydrous melt depleted in Al2O3, TiO2, and Na2O. The depleted Ndsingle bondHf isotopes and rare earth element patterns of the MTZ rocks indicate that their parental magmas originated from fluid-enhanced re-melting of a previously depleted mantle. Additionally, we proposed that the initiation of a new subduction zone results in the re-melting of the mantle peridotite, leading to the formation of primitive hydrous basaltic melts. The variable lithologies observed in the Zedong MTZ arise from fractional crystallization and repeated replenishment of hydrous melts.more » « less
-
Abstract Pyroxenite veins and dikes are commonly observed in the mantle section of ophiolites. Because of their mantle occurrence, these pyroxenites are free from crustal contamination and offer a unique opportunity for studying mantle compositions and melt–rock interaction processes. We conducted an integrated petrological and geochemical study of a suite of composite orthopyroxenite, websterite, and pyroxene-bearing dunite veins from the Xiugugabu ophiolite located on the western segment of Yarlung–Zangbo Suture Zone. The dunite is separated from the host peridotite by a layer of pyroxenite, forming a composite vein system. Systematic variations in major, minor, and trace element compositions in minerals across the composite veins are observed. Two generations of orthopyroxenes in the pyroxenites are characterized by high Mg#, low TiO2 concentrations, and depleted patterns of incompatible trace elements. Clinopyroxenes in the pyroxenites are characterized by high Mg#, low contents of TiO2 and Na2O, spooned shaped REE patterns, and a negative Zr anomaly. Through major and trace element modeling, we showed that both orthopyroxene and clinopyroxene were in equilibrium with melts with different compositions. This hypothesis is further confirmed by distinct initial Nd and Hf isotope ratios in the two pyroxenes. A model for the formation of composite pyroxenite veins is developed, whereby hydrous and silica-rich melts percolate along the margins of a dunite channel. The orthopyroxenite was formed by the reaction between a hydrous, silica-rich melt and the surrounding peridotite. The websterite is formed by reactive crystallization of a hybrid melt produced by mixing silica-rich melt and the melt formed by remelting of previously depleted peridotite in the deeper part of the mantle column. The extremely enriched Nd–Hf isotope compositions of the pyroxenite veins (εNd = −20.3 to +11.5 and εHf = −13.2 to +25.3, 125 million years ago) can be explained by the addition of ancient, recycled sediments to the mantle source in a supra-subduction setting. Based on the low-Cr# spinel in the Xiugugabu dunites (Cr# = 19–50) and the depleted nature of the parental melt of the Xiugugabu pyroxenites, we deduced that the formation of pyroxenites postdate the formation of the Xiugugabu ophiolite at ~125–130 Ma. Collectively, results from this study have provided support to the hypothesis that the Xiugugabu ophiolite experience a two-stage evolution, i.e., firstly formed in a mid-ocean ridge setting and subsequently modified in a supra subduction zone.more » « less
-
Abstract Many lines of evidence from high P–T experiments, thermodynamic models, and natural observations suggest that slab-derived aqueous fluids, which flux mantle wedges contain variable amounts of dissolved carbon. However, constraints on the effects of H2O–CO2 fluids on mantle melting, particularly at mantle wedge P–T conditions, are limited. Here, we present new piston cylinder experiments on fertile and depleted peridotite compositions with 3.5 wt.% H2O and XCO2 [= molar CO2 / (CO2 + H2O)] of 0.04–0.17. Experiments were performed at 2–3 GPa and 1350°C to assess how temperature, peridotite fertility, and XCO2 of slab-derived fluid affects partial melting in mantle wedges. All experiments produce olivine + orthopyroxene +7 to 41 wt.% partial melt. Our new data, along with previous lower temperature data, show that as mantle wedge temperature increases, primary melts become richer in SiO2, FeO*, and MgO and poorer CaO, Al2O3, and alkalis when influenced by H2O–CO2 fluids. At constant P–T and bulk H2O content, the extent of melting in the mantle wedge is largely controlled by peridotite fertility and XCO2 of slab-fluid. High XCO2 depleted compositions generate ~7 wt.% melt, whereas, at identical P–T, low XCO2 fertile compositions generate ~30 to 40 wt.% melt. Additionally, peridotite fertility and XCO2 have significant effects on peridotite partial melt compositions. At a constant P–T–XCO2, fertile peridotites generate melts richer in CaO and Al2O3 and poorer in SiO2, MgO + FeO, and alkalis. Similar to previous experimental studies, at a constant P–T fertility condition, as XCO2 increases, SiO2 and CaO of melts systematically decrease and increase, respectively. Such distinctive effects of oxidized form of dissolved carbon on peridotite partial melt compositions are not observed if the carbon-bearing fluid is reduced, such as CH4-bearing. Considering the large effect of XCO2 on melt SiO2 and CaO concentrations and the relatively oxidized nature of arc magmas, we compare the SiO2/CaO of our experimental melts and melts from previous peridotite + H2O ± CO2 studies to the SiO2/CaO systematics of primitive arc basalts and ultra-calcic, silica-undersaturated arc melt inclusions. From this comparison, we demonstrate that across most P–T–fertility conditions predicted for mantle wedges, partial melts from bulk compositions with XCO2 ≥ 0.11 have lower SiO2/CaO than all primitive arc melts found globally, even when correcting for olivine fractionation, whereas partial melts from bulk compositions with XCO2 = 0.04 overlap the lower end of the SiO2/CaO field defined by natural data. These results suggest that the upper XCO2 limit of slab-fluids influencing primary arc magma formation is 0.04 < XCO2 < 0.11, and this upper limit is likely to apply globally. Lastly, we show that the anomalous SiO2/CaO and CaO/Al2O3 signatures observed in ultra-calcic arc melt inclusions can be reproduced by partial melting of either CO2-bearing hydrous fertile and depleted peridotites with 0 < XCO2 < 0.11 at 2–3 GPa, or from nominally CO2-free hydrous fertile peridotites at P > 3 GPa.more » « less
