skip to main content


Title: Anisotropic silica coating on gold nanorods boosts their potential as SERS sensors
Gold nanorods are well-known surface-enhanced Raman scattering substrates. Under longitudinal plasmonic excitation, the ends of the nanorods experience larger local electric fields compared to the sides of the rods, suggesting that Raman-active molecules would be best detected if the molecules could preferentially bind to the ends of the nanorods. Coating the tips of gold nanorods with anionic mesoporous silica caps enabled surface-enhanced Raman scattering (SERS) detection of the cationic dye methylene blue at lower concentrations than observed for the corresponding silica coating of the entire rod. By analyzing the intensity ratio of two Raman active modes of methylene blue and the surface plasmon resonance peak shift of the gold nanorod composites, it can be inferred that at a low concentration of methylene blue, molecules adsorb to the tips of the tip coated silica gold nanorods. Functionalization of the anionic silica endcaps with cationic groups eliminates the SERS enhancement for the cationic methylene blue, demonstrating the electrostatic nature of the adsorption process in this case. These results show that anisotropic silica coatings can concentrate analytes at the tips of gold nanorods for improvements in chemical sensing and diagnostics.  more » « less
Award ID(s):
2107793
PAR ID:
10349413
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Nanoscale
Volume:
14
Issue:
13
ISSN:
2040-3364
Page Range / eLocation ID:
5214 to 5226
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Chen, Zan (Ed.)
    Inelastic scattering from molecules because of vibrational modes produces unique Raman shifts, allowing these analytes to be detected with high specificity. Because Raman scattering is weak, surface-enhanced Raman scattering (SERS) has been used as a label-free technique for the detection of a variety of analytes at low concentrations. Using simple solution-based colloidal processing techniques, we have fabricated gold-coated carbon-black nanoparticles that show enhanced Raman activity. By varying the fabrication conditions, we create particles of different surface morphologies, allowing control over the peak wavelength for localized surface plasmon resonance (LSPR). By matching the LSPR wavelength to the incident laser wavelength, we get the highest signal from two model analytes, 4-nitrobenzenethiol (4-NBT) and Congo Red (CR). Our straightforward room temperature solution-based approach for making tunable SERS-active particles expands the range of incident radiation wavelengths that can be used for the detection of analytes using Raman scattering. 
    more » « less
  2. Abstract

    The gold–sulfur (Au–S) and silver–sulfur (Ag–S) bonds are integral to the surface modification of metal films with alkanethiol monolayers. Although the metal–sulfur bond can be characterized with surface‐enhanced Raman spectroscopy (SERS) at roughened metal films, some applications require or perform better when using a smooth metal surface, which is not suitable for SERS signal enhancement. Directional‐surface‐plasmon‐coupled Raman scattering (directional Raman scattering) is an approach to measure metal–sulfur bonds on smooth metal films with sub‐monolayer sensitivity. The metal–sulfur bonds formed from a benzenethiol monolayer on smooth planar gold or silver films are observed in the directional Raman scattering spectra between 240 and 270 cm−1; the signal‐to‐noise ratio of the Au–S Raman peak is 60. Importantly, the directional Raman scattering signal measured with smooth metal surfaces can be simply modeled and easily compared across many samples. Directional Raman scattering can also be measured at roughened metal films, which makes it applicable for many analyses.

     
    more » « less
  3. Recently, surface-enhanced Raman scattering (SERS) joined other optical methods in making novel anticounterfeiting materials due to the fact that abundant molecular fingerprints in Raman spectra can be less susceptible to fraud. Using these molecular features, it is critical to make novel nanostructures with increased SERS enhancement and stability. Herein, we synthesized star-shaped gold nanoparticles as SERS substrates and applied various Raman probes with these gold nanostars to make SERS tags. The encoded molecular information was successfully decoded using principal component analysis (PCA). These colloidal tags can be further stabilized when embedded in a polymer matrix. We made a prototype ballpoint pen that can do simple writing with these secret SERS inks. 
    more » « less
  4. Abstract

    In recent years, concerns have been raised regarding the contamination of grapes with pesticide residues. As consumer demand for safer food products grows, regular monitoring of pesticide residues in food has become essential. This study sought to develop a rapid and sensitive technique for detecting two specific pesticides (phosmet and paraquat) present on the grape surface using the surface‐enhanced Raman spectroscopy (SERS) method. Gold nanostars (AuNS) particles were synthesized, featuring spiky tips that act as hot spots for localized surface plasmon resonance, thereby enhancing Raman signals. Additionally, the roughened surface of AuNS increases the surface area, resulting in improved interactions between the substrate and analyte molecules. Prominent Raman peaks of mixed contaminants were acquired and used to characterize and quantify the pesticides. It was observed that the SERS intensity of the Raman peaks changed in proportion to the concentration ratio of phosmet and paraquat. Moreover, AuNS exhibited superior SERS enhancement compared to gold nanoparticles. The results demonstrate that the lowest detectable concentration for both pesticides on grape surfaces is 0.5 mg/kg. These findings suggest that SERS coupled with AuNS constitutes a practical and promising approach for detecting and quantifying trace contaminants in food.

    Practical Application

    This research established a novel surface‐enhanced Raman spectroscopy (SERS) method coupled with a simplified extraction protocol and gold nanostar substrates to detect trace levels of pesticides in fresh produce. The detection limits meet the maximum residue limits set by the EPA. This substrate has great potential for rapid measurements of chemical contaminants in foods.

     
    more » « less
  5. Surface-enhanced Raman scattering (SERS) from gold and silver nanoparticles suspended in solution enables a more quantitative level of analysis relative to SERS from aggregated nanoparticles and roughened metal substrates. This is due to the more predictable and consistent near field enhancement regions created by isolated nanoparticles, and to averaging over the many nanoparticles that diffuse through the excitation beam during the measurement. However, we find that localized heating of the solution by the focused excitation leads to thermophoresis which alters the nanorod concentration in the focal volume and therefore impacts quantitative analysis. Since many phenomena may impact the Raman signal, we record both the Rayleigh and Raman scattering from gold nanoparticle solutions. This allows us to distinguish molecular processes from depletion of nanoparticles in the excitation beam. We observe that the concentration of nanorods can deplete to less than 50% of its original value over 100 second timescale, which are consistent with a thermophoretic effect driving nanoparticles from the beam spot. We also find that the particle motion drives convection within the sample cell that further contributes to signal instabilities. 
    more » « less