An official website of the United States government
Abstract Landslides commonly occur in areas with steep topography and abundant precipitation and pose a significant hazard to local communities. Some of the largest known landslides occur in Alaska, including several that caused local tsunamis. Many landslides may have gone undetected in remote areas due to lack of observations. Here, we develop a semiautomated workflow using both seismic and geodetic observations to detect, locate, validate, and characterize landslides in Alaska. Seismic observations have shown promise in continuously monitoring landslide occurrence, while remote sensing techniques are well suited for verification and high‐resolution imaging of landslides. We validate our procedure using the 28 June 2016, Lamplugh Glacier landslide. We also present observations of a previously unknown landslide occurred on 22 September 2017 in the Wrangell Mountains region. The Wrangell Mountains landslide generated a coherent surface wavefield recorded across Alaska and the contiguous United States. We used Sentinel‐1 Synthetic Aperture Radar and Sentinel‐2 optical imagery to map the respective mass deposit. To investigate the landslide dynamics, we inverted regional seismic surface wave data for a centroid single force failure model. Our model suggests that the Wrangell Mountains landslide lasted for about 140 s and had two subevents involving at least five distinct stages. We estimate that the landslide had displaced 3.1–13.4 million tons of rocks over a distance of ∼2 km. Our results suggest that combining seismic and geodetic observations can vastly improve the detection and characterization of landslides in remote areas in Alaska and elsewhere, providing new insights into the landslide dynamics.
more »
« less
Atypical landslide induces speedup, advance, and long-term slowdown of a tidewater glacier
Atmospheric and oceanic warming over the past century have driven rapid glacier thinning and retreat, destabilizing hillslopes and increasing the frequency of landslides. The impact of these landslides on glacier dynamics and resultant secondary landslide hazards are not fully understood. We investigated how a 262 ± 77 × 106 m3 landslide affected the flow of Amalia Glacier, Chilean Patagonia. Despite being one of the largest recorded landslides in a glaciated region, it emplaced little debris onto the glacier surface. Instead, it left a series of landslide-perpendicular ridges, landslide-parallel fractures, and an apron of ice debris—with blocks as much as 25 m across. Our observations suggest that a deep-seated failure of the mountainside impacted the glacier flank, propagating brittle deformation through the ice and emplacing the bulk of the rock mass below the glacier. The landslide triggered a brief downglacier acceleration of Amalia Glacier followed by a slowdown of as much as 60% of the pre-landslide speed and increased suspended-sediment concentrations in the fjord. These results highlight that landslides may induce widespread and long-lasting disruptions to glacier dynamics.
more »
« less
- Award ID(s):
- 1714614
- PAR ID:
- 10353110
- Date Published:
- Journal Name:
- Geology
- ISSN:
- 0091-7613
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Tens of thousands of landslides were generated over 10,000 km2 of North Canterbury and Marlborough as a consequence of the 14 November 2016, Mw7.8 Kaikōura Earthquake. The most intense landslide damage was concentrated in 3500 km2 around the areas of fault rupture. Given the sparsely populated area affected by landslides, only a few homes were impacted and there were no recorded deaths due to landslides. Landslides caused major disruption with all road and rail links with Kaikōura being severed. The landslides affecting State Highway 1 (the main road link in the South Island of New Zealand) and the South Island main trunk railway extended from Ward in Marlborough all the way to the south of Oaro in North Canterbury. The majority of landslides occurred in two geological and geotechnically distinct materials reflective of the dominant rock types in the affected area. In the Neogene sedimentary rocks (sandstones, limestones and siltstones) of the Hurunui District, North Canterbury and around Cape Campbell in Marlborough, first-time and reactivated rock-slides and rock-block slides were the dominant landslide type. These rocks also tend to have rock material strength values in the range of 5-20 MPa. In the Torlesse ‘basement’ rocks (greywacke sandstones and argillite) of the Kaikōura Ranges, first-time rock and debris avalanches were the dominant landslide type. These rocks tend to have material strength values in the range of 20-50 MPa. A feature of this earthquake is the large number (more than 200) of valley blocking landslides it generated. This was partly due to the steep and confined slopes in the area and the widely distributed strong ground shaking. The largest landslide dam has an approximate volume of 12(±2) M m3 and the debris from this travelled about 2.7 km2 downslope where it formed a dam blocking the Hapuku River. The long-term stability of cracked slopes and landslide dams from future strong earthquakes and large rainstorms are an ongoing concern to central and local government agencies responsible for rebuilding homes and infrastructure. A particular concern is the potential for debris floods to affect downstream assets and infrastructure should some of the landslide dams breach catastrophically. At least twenty-one faults ruptured to the ground surface or sea floor, with these surface ruptures extending from the Emu Plain in North Canterbury to offshore of Cape Campbell in Marlborough. The mapped landslide distribution reflects the complexity of the earthquake rupture. Landslides are distributed across a broad area of intense ground shaking reflective of the elongate area affected by fault rupture, and are not clustered around the earthquake epicentre. The largest landslides triggered by the earthquake are located either on or adjacent to faults that ruptured to the ground surface. Surface faults may provide a plane of weakness or hydrological discontinuity and adversely oriented surface faults may be indicative of the location of future large landslides. Their location appears to have a strong structural geological control. Initial results from our landslide investigations suggest predictive models relying only on ground-shaking estimates underestimate the number and size of the largest landslides that occurred.more » « less
-
Abstract. We developed a new approach for mapping landslide hazards by combiningprobabilities of landslide impacts derived from a data-driven statisticalapproach and a physically based model of shallow landsliding. Ourstatistical approach integrates the influence of seven site attributes (SAs) onobserved landslides using a frequency ratio (FR) method. Influential attributesand resulting susceptibility maps depend on the observations of landslidesconsidered: all types of landslides, debris avalanches only, or source areasof debris avalanches. These observational datasets reflect the detection ofdifferent landslide processes or components, which relate to differentlandslide-inducing factors. For each landslide dataset, a stability index (SI) is calculated as a multiplicative result of the frequency ratios for all attributes and is mapped across our study domain in the North Cascades National Park Complex (NOCA), Washington, USA. A continuous function is developed to relate local SI values to landslide probability based on a ratio of landslide and non-landslide grid cells. The empirical model probability derived from the debris avalanche source area dataset is combined probabilistically with a previously developed physically based probabilistic model. A two-dimensional binning method employs empirical andphysically based probabilities as indices and calculates a joint probabilityof landsliding at the intersections of probability bins. A ratio of thejoint probability and the physically based model bin probability is used asa weight to adjust the original physically based probability at each gridcell given empirical evidence. The resulting integrated probability oflandslide initiation hazard includes mechanisms not captured by the infinite-slope stability model alone. Improvements in distinguishing potentiallyunstable areas with the proposed integrated model are statisticallyquantified. We provide multiple landslide hazard maps that land managers canuse for planning and decision-making, as well as for educating the publicabout hazards from landslides in this remote high-relief terrain.more » « less
-
Abstract Debris flows pose persistent hazards and shape high‐relief landscapes in diverse physiographic settings, but predicting the spatiotemporal occurrence of debris flows in postglacial topography remains challenging. To evaluate the debris flow process in high‐relief postglacial terrain, we conducted a geomorphic investigation to characterize geologic, glacial, volcanic, and land use contributions to landslide initiation across Southeast Alaska. To evaluate controls on landslide (esp. debris flow) occurrence in Sitka, we used field observation, geomorphic mapping, landslide characteristics as documented in the Tongass National Forest inventory, and a novel application of the shallow landslide model SHALSTAB to postglacial terrain. A complex geomorphic history of glaciation and volcanic activity provides a template for spatially heterogeneous landslide occurrence. Landslide density across the region is highly variable, but debris flow density is high on south‐ or southeast‐facing hillslopes where volcanic tephra soils are present and/or where timber harvest has occurred since 1900. High landslide density along the western coast of Baranof and Kruzof islands coincides with deposition of glacial sediment and thick tephra and exposure to extreme rainfall from atmospheric rivers on south‐facing aspects but the relative contributions of these controls are unclear. Timber harvest has also been identified as an important control on landslide occurrence in the region. Focusing on a subset of geo‐referenced landslides near Sitka, we used the SHALSTAB shallow landslide initiation model, which has been frequently applied in non‐glacial terrain, to identify areas of high landslide potential in steep, convergent terrain. In a validation against mapped landslide polygons, the model significantly outperformed random guessing, with area under the curve (AUC) = 0.709 on a performance classification curve of true positives vs. false positives. This successful application of SHALSTAB demonstrates practical utility for hazards analysis in postglacial landscapes to mitigate risk to people and infrastructure.more » « less
-
Abstract In early December 2020, an atmospheric river (AR) and rain-on-snow (ROS) event impacted the Haines, Alaska area, resulting in record-breaking rainfall and snowmelt that caused flooding and dozens of mass movement events. We consider the AR—a one-in-500-year event—as the trigger for the devastating Beach Road Landslide (BRLS), which destroyed or damaged four residences and took the lives of two people. The BRLS started as a debris avalanche and transitioned into a debris flow, with a total approximate landslide volume of 187,100 m3. Geomorphic analysis using lidar data identified evidence of paleo-landslides and displaced masses of rock, one of which served as the source area for the BRLS. Significant structural features in the weak ultramafic bedrock defined the head scarp area and formed the failure plane. This study illustrates the importance of identifying pre-existing landslide features and source areas likely to produce future landslides. As an increase in ROS events is projected for Southeast Alaska with warmer and wetter winters, we recommend the development of an AR scale coupled with geological information for the region, to enhance warnings to residents in landslide-prone areas.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1130/G49854.1
