skip to main content


Title: Mimicking Elementary Reactions of Manganese Lipoxygenase Using Mn-hydroxo and Mn-alkylperoxo Complexes
Manganese lipoxygenase (MnLOX) is an enzyme that converts polyunsaturated fatty acids to alkyl hydroperoxides. In proposed mechanisms for this enzyme, the transfer of a hydrogen atom from a substrate C-H bond to an active-site MnIII-hydroxo center initiates substrate oxidation. In some proposed mechanisms, the active-site MnIII-hydroxo complex is regenerated by the reaction of a MnIII-alkylperoxo intermediate with water by a ligand substitution reaction. In a recent study, we described a pair of MnIII-hydroxo and MnIII-alkylperoxo complexes supported by the same amide-containing pentadentate ligand (6Medpaq). In this present work, we describe the reaction of the MnIII-hydroxo unit in C-H and O-H bond oxidation processes, thus mimicking one of the elementary reactions of the MnLOX enzyme. An analysis of kinetic data shows that the MnIII-hydroxo complex [MnIII(OH)(6Medpaq)]+ oxidizes TEMPOH (2,2′-6,6′-tetramethylpiperidine-1-ol) faster than the majority of previously reported MnIII-hydroxo complexes. Using a combination of cyclic voltammetry and electronic structure computations, we demonstrate that the weak MnIII-N(pyridine) bonds lead to a higher MnIII/II reduction potential, increasing the driving force for substrate oxidation reactions and accounting for the faster reaction rate. In addition, we demonstrate that the MnIII-alkylperoxo complex [MnIII(OOtBu)(6Medpaq)]+ reacts with water to obtain the corresponding MnIII-hydroxo species, thus mimicking the ligand substitution step proposed for MnLOX.  more » « less
Award ID(s):
1900384
NSF-PAR ID:
10354798
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Molecules
Volume:
26
Issue:
23
ISSN:
1420-3049
Page Range / eLocation ID:
7151
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The enzymes manganese superoxide dismutase and manganese lipoxygenase use Mn III –hydroxo centres to mediate proton-coupled electron transfer (PCET) reactions with substrate. As manganese is earth-abundant and inexpensive, manganese catalysts are of interest for synthetic applications. Recent years have seen exciting reports of enantioselective C–H bond oxidation by Mn catalysts supported by aminopyridyl ligands. Such catalysts offer economic and environmentally-friendly alternatives to conventional reagents and catalysts. Mechanistic studies of synthetic catalysts highlight the role of Mn–oxo motifs in attacking substrate C–H bonds, presumably by a concerted proton–electron transfer (CPET) step. (CPET is a sub-class of PCET, where the proton and electron are transferred in the same step.) Knowledge of geometric and electronic influences for CPET reactions of Mn–hydroxo and Mn–oxo adducts enhances our understanding of biological and synthetic manganese centers and informs the design of new catalysts. In this Feature article, we describe kinetic, spectroscopic, and computational studies of Mn III –hydroxo and Mn IV –oxo complexes that provide insight into the basis for the CPET reactivity of these species. Systematic perturbations of the ligand environment around Mn III –hydroxo and Mn IV –oxo motifs permit elucidation of structure–activity relationships. For Mn III –hydroxo centers, electron-deficient ligands enhance oxidative reactivity. However, ligand perturbations have competing consequences, as changes in the Mn III/II potential, which represents the electron-transfer component for CPET, is offset by compensating changes in the p K a of the Mn II –aqua product, which represents the proton-transfer component for CPET. For Mn IV –oxo systems, a multi-state reactivity model inspired the development of significantly more reactive complexes. Weakened equatorial donation to the Mn IV –oxo unit results in large rate enhancements for C–H bond oxidation and oxygen-atom transfer reactions. These results demonstrate that the local coordination environment can be rationally changed to enhance reactivity of Mn III –hydroxo and Mn IV –oxo adducts. 
    more » « less
  2. Abstract

    The search for more effective and highly selective C–H bond oxidation of accessible hydrocarbons and biomolecules is a greatly attractive research mission. The elucidating of mechanism and controlling factors will, undoubtedly, help to broaden scope of these synthetic protocols, and enable discovery of more efficient, environmentally benign, and highly practical new C–H oxidation reactions. Here, we reveal the stepwise intramolecular SN2 nucleophilic substitution mechanism with the rate-limiting C–O bond formation step for the Pd(II)-catalyzed C(sp3)–H lactonization in aromatic 2,6-dimethylbenzoic acid. We show that for this reaction, the direct C–O reductive elimination from both Pd(II) and Pd(IV) (oxidized by O2oxidant) intermediates is unfavorable. Critical factors controlling the outcome of this reaction are the presence of the η3-(π-benzylic)–Pd and K+–O(carboxylic) interactions. The controlling factors of the benzylic vs ortho site-selectivity of this reaction are the: (a) difference in the strains of the generated lactone rings; (b) difference in the strengths of the η3-(π-benzylic)–Pd and η2-(π-phenyl)–Pd interactions, and (c) more pronounced electrostatic interaction between the nucleophilic oxygen and K+cation in the ortho-C–H activation transition state. The presented data indicate the utmost importance of base, substrate, and ligand in the selective C(sp3)–H bond lactonization in the presence of C(sp2)–H.

     
    more » « less
  3. Abstract

    Described is a systematic comparison of factors impacting the relative rates and selectivities of C(sp3)−C and C(sp3)−O bond‐forming reactions at high‐valent Ni as a function of oxidation state. Two Ni complexes are compared: a cationic octahedral NiIVcomplex ligated by tris(pyrazolyl)borate and a cationic octahedral NiIIIcomplex ligated by tris(pyrazolyl)methane. Key features of reactivity/selectivity are revealed: 1) C(sp3)−C(sp2) bond‐forming reductive elimination occurs from both centers, but the NiIIIcomplex reacts up to 300‐fold faster than the NiIV, depending on the reaction conditions. The relative reactivity is proposed to derive from ligand dissociation kinetics, which vary as a function of oxidation state and the presence/absence of visible light. 2) Upon the addition of acetate (AcO), the NiIVcomplex exclusively undergoes C(sp3)−OAc bond formation, while the NiIIIanalogue forms the C(sp3)−C(sp2) coupled product selectively. This difference is rationalized based on the electrophilicity of the respective M−C(sp3) bonds, and thus their relative reactivity towards outer‐sphere SN2‐type bond‐forming reactions.

     
    more » « less
  4. Abstract

    Described is a systematic comparison of factors impacting the relative rates and selectivities of C(sp3)−C and C(sp3)−O bond‐forming reactions at high‐valent Ni as a function of oxidation state. Two Ni complexes are compared: a cationic octahedral NiIVcomplex ligated by tris(pyrazolyl)borate and a cationic octahedral NiIIIcomplex ligated by tris(pyrazolyl)methane. Key features of reactivity/selectivity are revealed: 1) C(sp3)−C(sp2) bond‐forming reductive elimination occurs from both centers, but the NiIIIcomplex reacts up to 300‐fold faster than the NiIV, depending on the reaction conditions. The relative reactivity is proposed to derive from ligand dissociation kinetics, which vary as a function of oxidation state and the presence/absence of visible light. 2) Upon the addition of acetate (AcO), the NiIVcomplex exclusively undergoes C(sp3)−OAc bond formation, while the NiIIIanalogue forms the C(sp3)−C(sp2) coupled product selectively. This difference is rationalized based on the electrophilicity of the respective M−C(sp3) bonds, and thus their relative reactivity towards outer‐sphere SN2‐type bond‐forming reactions.

     
    more » « less
  5. Abstract

    Visible‐light capture activates a thermodynamically inert CoIII−CF3bond for direct C−H trifluoromethylation of arenes and heteroarenes. New trifluoromethylcobalt(III) complexes supported by a redox‐active [OCO] pincer ligand were prepared. Coordinating solvents, such as MeCN, afford green, quasi‐octahedral [(SOCO)CoIII(CF3)(MeCN)2] (2), but in non‐coordinating solvents the complex is red, square pyramidal [(SOCO)CoIII(CF3)(MeCN)] (3). Both are thermally stable, and2is stable in light. But exposure of3to low‐energy light results in facile homolysis of the CoIII−CF3bond, releasing.CF3radical, which is efficiently trapped by TEMPO.or (hetero)arenes. The homolytic aromatic substitution reactions do not require a sacrificial or substrate‐derived oxidant because the CoIIby‐product of CoIII−CF3homolysis produces H2. The photophysical properties of2and3provide a rationale for the disparate light stability.

     
    more » « less