An official website of the United States government
Abstract Shark skin denticles (scales) are diverse in morphology both among species and across the body of single individuals, although the function of this diversity is poorly understood. The extremely elongate and highly flexible tail of thresher sharks provides an opportunity to characterize gradients in denticle surface characteristics along the length of the tail and assess correlations between denticle morphology and tail kinematics. We measured denticle morphology on the caudal fin of three mature and two embryo common thresher sharks (Alopias vulpinus), and we compared thresher tail denticles to those of eleven other shark species. Using surface profilometry, we quantified 3D‐denticle patterning and texture along the tail of threshers (27 regions in adults, and 16 regions in embryos). We report that tails of thresher embryos have a membrane that covers the denticles and reduces surface roughness. In mature thresher tails, surfaces have an average roughness of 5.6 μm which is smoother than some other pelagic shark species, but similar in roughness to blacktip, porbeagle, and bonnethead shark tails. There is no gradient down the tail in roughness for the middle or trailing edge regions and hence no correlation with kinematic amplitude or inferred magnitude of flow separation along the tail during locomotion. Along the length of the tail there is a leading‐to‐trailing‐edge gradient with larger leading edge denticles that lack ridges (average roughness = 9.6 μm), and smaller trailing edge denticles with 5 ridges (average roughness = 5.7 μm). Thresher shark tails have many missing denticles visible as gaps in the surface, and we present evidence that these denticles are being replaced by new denticles that emerge from the skin below.
more »
« less
Dermal Denticle Diversity in Sharks: Novel Patterns on the Interbranchial Skin
Synopsis Shark skin is covered in dermal denticles—tooth-like structures consisting of enameloid, dentine, and a central pulp cavity. Previous studies have demonstrated differences in denticle morphology both among species and across different body regions within a species, including one report of extreme morphological variation within a 1 cm distance on the skin covering the branchial pouches, a region termed “interbranchial skin.” We used gel-based profilometry, histology, and scanning electron microscopy to quantify differences in denticle morphology and surface topography of interbranchial skin denticles among 13 species of sharks to better understand the surface structure of this region. We show that (1) interbranchial skin denticles differ across shark species, and (2) denticles on the leading edge of the skin covering each gill pouch have different morphology and surface topography compared with denticles on the trailing edge. Across all species studied, there were significant differences in denticle length (P = 0.01) and width (P = 0.002), with shorter and wider leading edge denticles compared with trailing edge denticles. Surface skew was also higher in leading edge denticles (P = 0.009), though most values were still negative, indicating a surface texture more dominated by valleys than peaks. Overall, leading edge denticles were smoother-edged than trailing edge denticles in all of the species studied. These data suggest two hypotheses: (1) smoother-edged leading edge denticles protect the previous gill flap from abrasion during respiration, and (2) ridged denticle morphology at the trailing edge might alter water turbulence exiting branchial pouches after passing over the gills. Future studies will focus on determining the relationship between denticle morphology and water flow by visualizing fluid motion over interbranchial denticles during in vivo respiration.
more »
« less
- Award ID(s):
- 1907156
- PAR ID:
- 10360938
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- Integrative Organismal Biology
- Volume:
- 3
- Issue:
- 1
- ISSN:
- 2517-4843
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Synopsis Shark skin is a composite of mineralized dermal denticles embedded in an internal collagen fiber network and is sexually dimorphic. Female shark skin is thicker, has greater denticle density and denticle overlap compared to male shark skin, and denticle morphology differs between sexes. The skin behaves with mechanical anisotropy, extending farther when tested along the longitudinal (anteroposterior) axis but increasing in stiffness along the hoop (dorsoventral or circumferential) axis. As a result, shark skin has been hypothesized to function as an exotendon. This study aims to quantify sex differences in the mechanical properties and morphology of shark skin. We tested skin from two immature male and two immature female sharks from three species (bonnethead shark, Sphyrna tiburo; bull shark, Carcharhinus leucas; silky shark, Carcharhinus falciformis) along two orientations (longitudinal and hoop) in uniaxial tension with an Instron E1000 at a 2 mm s−1 strain rate. We found that male shark skin was significantly tougher than female skin, although females had significantly greater skin thickness compared to males. We found skin in the hoop direction was significantly stiffer than the longitudinal direction across sexes and species, while skin in the longitudinal direction was significantly more extensible than in the hoop direction. We found that shark skin mechanical behavior was impacted by sex, species, and direction, and related to morphological features of the skin.more » « less
-
Direct numerical simulation is performed for flow separation over a bump in a turbulent channel. Comparisons are made between a smooth bump and one where the lee side is covered with replicas of shark denticles – dermal scales that consist of a slender base (the neck) and a wide top (the crown). As flow over the bump is under an adverse pressure gradient (APG), a reverse pore flow is formed in the porous cavity region underneath the crowns of the denticle array. Remarkable thrust is generated by the reverse pore flow as denticle necks accelerate the fluid passing between them in the upstream direction. Several geometrical features of shark denticles, including some that had not previously been considered hydrodynamically functional, are identified to form the two-layer denticle structure that enables and sustains the reverse pore flow and thrust generation. The reverse pore flow is activated by the APG before massive flow detachment. The results indicate a proactive, on-demand drag reduction mechanism that leverages and transforms the APG into a favourable outcome.more » « less
-
ABSTRACT The gill surface area of aquatic ectotherms is thought to be closely linked to the ontogenetic scaling of metabolic rate, a relationship that is often used to explain and predict ecological patterns across species. However, there are surprisingly few within-species tests of whether metabolic rate and gill area scale similarly. We examined the relationship between oxygen supply (gill area) and demand (metabolic rate) by making paired estimates of gill area with resting and maximum metabolic rates across ontogeny in the relatively inactive California horn shark, Heterodontus francisci. We found that the allometric slope of resting metabolic rate was 0.966±0.058 (±95% CI), whereas that of maximum metabolic rate was somewhat steeper (1.073±0.040). We also discovered that the scaling of gill area shifted with ontogeny: the allometric slope of gill area was shallower in individuals <0.203 kg in body mass (0.564±0.261), but increased to 1.012±0.113 later in life. This appears to reflect changes in demand for gill-oxygen uptake during egg case development and immediately post hatch, whereas for most of ontogeny, gill area scales in between that of resting and maximum metabolic rate. These relationships differ from predictions of the gill oxygen limitation theory, which argues that the allometric scaling of gill area constrains metabolic processes. Thus, for the California horn shark, metabolic rate does not appear limited by theoretical surface-area-to-volume ratio constraints of gill area. These results highlight the importance of data from paired and size-matched individuals when comparing physiological scaling relationships.more » « less
-
ABSTRACT Niche partitioning promotes species coexistence. Yet, it remains unclear how phylogeny and morphology influence the trophic niches of closely related aquatic species with shared feeding modes. Freshwater mussels (Family: Unionidae) are a group of filter‐feeding bivalves that are ideal for investigating mechanisms of niche partitioning. Particle size selection and patterns of ingestion are controlled by gill latero‐frontal cirri density (CD) and the number of cilia per cirrus (CC). We investigated trophic assimilation and niche area using stable isotope signatures (𝛿13C and 𝛿15N) and gill morphology with scanning‐electron microscopy for a diverse mussel assemblage from the Sipsey River, Alabama, USA. We predicted that (1) trophic niches and gill morphology would differ within and among species across sites; (2) co‐occurring species would partition food resources; (3) greater phylogenetic distances among species would result in increased trophic dissimilarity; (4) more CC and higher CD would result in a narrower trophic niche area, or more constrained range of food items assimilated. We found that (1) species identity and site influenced gill morphology and stable isotope signatures but that the trophic niche area of a species was only affected by species identity; (2) the average proportion of niche area overlap between co‐occurring species was low across sites (0.04 to 0.18); (3) trophic dissimilarity among species increased with phylogenetic distance; (4) CD but not the number of CC negatively related to trophic niche area. Our results indicate that gill morphology and evolutionary history are likely key factors governing the trophic niches of mussels. In addition, intraspecific variation in gill morphology across sites may either reflect a phenotypic response to differences in local resource availability or suggest that other mechanisms shape particle selection. Examining the interplay among the trophic niche, phylogeny, and morphology among functionally similar species further informs our understanding of the mechanisms facilitating their coexistence.more » « less
