An official website of the United States government
Abstract Achieving substantial anisotropic thermal expansion (TE) in solid‐state materials is challenging as most materials undergo volumetric expansion upon heating. Here, we describe colossal, anisotropic TE in crystals of an organic compound functionalized with two azo groups. Interestingly, the material exhibits distinct and switchable TE behaviors within different temperature regions. At high temperature, two‐dimensional, area zero TE and colossal, positive linear TE (α=211 MK−1) are attained due to dynamic motion, while at low temperature, moderate positive TE occurs in all directions. Investigation of the solid‐state motion showed the change in enthalpy and entropy are quite different in the two temperature regions and solid‐state NMR experiments support motion in the solid. Cycling experiments demonstrate that the solid‐state motions and TE behaviors are completely reversible. These results reveal strategies for designing significant anisotropic and switchable behaviors in solid‐state materials.
more »
« less
Thermoelectric efficiency of anisotropic materials with an application in layered systems
Abstract Thermoelectric (TE) transport in anisotropic materials is investigated based on most general thermodynamical concepts. Currents and power conversion efficiency are studied in SnSe and SnS in different directions. The design of composites whose TE performance along different principles directions is the same is proposed. Although such features do not occur naturally, such man-made anisotropic materials can be constructed using bilayers achieving much broadened working conditions of TE conversion devices. Intricate relationships between the anisotropy and the direction of the electric and heat currents are revealed, which further help us understand how transport occurs in such composites.
more »
« less
- Award ID(s):
- 1748188
- PAR ID:
- 10361291
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Journal of Physics: Energy
- Volume:
- 4
- Issue:
- 1
- ISSN:
- 2515-7655
- Page Range / eLocation ID:
- Article No. 014001
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Atomically thin materials, leveraging their low‐dimensional geometries and superior mechanical properties, are amenable to exquisite strain manipulation with a broad tunability inaccessible to bulk or thin‐film materials. Such capability offers unexplored possibilities for probing intriguing physics and materials science in the 2D limit as well as enabling unprecedented device applications. Here, the strain‐engineered anisotropic optical and electrical properties in solution‐grown, sub‐millimeter‐size 2D Te are systematically investigated through designing and introducing a controlled buckled geometry in its intriguing chiral‐chain lattice. The observed Raman spectra reveal anisotropic lattice vibrations under the corresponding straining conditions. The feasibility of using buckled 2D Te for ultrastretchable strain sensors with a high gauge factor (≈380) is further explored. 2D Te is an emerging material boasting attractive characteristics for electronics, sensors, quantum devices, and optoelectronics. The results suggest the potential of 2D Te as a promising candidate for designing and implementing flexible and stretchable devices with strain‐engineered functionalities.more » « less
-
Metamaterials and composite structures are able to manipulate waves and focus fields and currents in desirable directions. Designs based on spatial and temporal variation of material properties create structures forcing fluxes into specified parts of the domain or concentrating energy into arrays of progressively sharpening pulses. The paper discusses examples of focusing structures, mathematical and intuitive considerations that influence optimal design theory. The optimality requirement introduces zones of optimal composites with variable microgeometry. The observed absence of classical solutions motivates the extension of the class of optimal partitions to composites. Such materials also provide a solution to the problem of optimal design of a thermal lens focusing thermal fluxes when the incoming fluxes are not completely known in advance. An extension of designs to dynamical materials such as space–time checkerboard composites introduces metamaterials with additional capabilities that control the accumulation of energy in the propagating waves. The discussed mathematical methods of focusing and suitable properties alternation targeted on optimality are illustrated by physical examples.more » « less
-
Abstract Spinodal architected materials with tunable anisotropy unify optimal design and manufacturing of multiscale structures. By locally varying the spinodal class, orientation, and porosity during topology optimization, a large portion of the anisotropic material space is exploited such that material is efficiently placed along principal stress trajectories at the microscale. Additionally, the bicontinuous, nonperiodic, unstructured, and stochastic nature of spinodal architected materials promotes mechanical and biological functions not explicitly considered during optimization (e.g., insensitivity to imperfections, fluid transport conduits). Furthermore, in contrast to laminated composites or periodic, structured architected materials (e.g., lattices), the functional representation of spinodal architected materials leads to multiscale, optimized designs with clear physical interpretation that can be manufactured directly, without special treatment at spinodal transitions. Physical models of the optimized, spinodal‐embedded parts are manufactured using a scalable, voxel‐based strategy to communicate with a masked stereolithography (m‐SLA) 3D printer.more » « less
-
Abstract Thermoset materials have begun to be applied in additive composite manufacturing due to their ability to withstand high temperatures without losing structural integrity. Meanwhile, the characterization of mechanical properties for additively manufactured composites is critical for ensuring material reliability and safety. However, traditional testing methods struggle to accurately and nondestructively characterize additively manufactured composites due to challenges posed by curing processes, microstructural variability, anisotropic properties of thermoset composites, and the risk of damaging these materials during evaluation. For characterizing the mechanical properties of additive-manufactured thermoset composites, this paper presents a novel method that combines a nondestructive PZT-LDV guided wave sensing system and a wavenumber analysis that fuses multidimensional Fourier transform with dispersion curve regression. For proof of concept, we performed an experiment using our method to measure a 3D-printed thermoset composite panel. Based on our nondestructive approach, two material properties (shear wave velocity and Poisson’s ratio) in multiple directions were successfully determined for the tested panel. We expect this research to introduce a non-contact and efficient method for characterizing various composites and monitoring their property changes after additive manufacturing.more » « less
