Wearable personal protective equipment that is decorated with photoactive self‐cleaning materials capable of actively neutralizing biological pathogens is in high demand. Here, we developed a series of solution‐processable, crystalline porous materials capable of addressing this challenge. Textiles coated with these materials exhibit a broad range of functionalities, including spontaneous reactive oxygen species (ROS) generation upon absorption of daylight, and long‐term ROS storage in dark conditions. The ROS generation and storage abilities of these materials can be further improved through chemical engineering of the precursors without altering the three‐dimensional assembled superstructures. In comparison with traditional TiO2or C3N4self‐cleaning materials, the fluorinated molecular coating material HOF‐101‐F shows a 10‐ to 60‐fold enhancement of ROS generation and 10‐ to 20‐fold greater ROS storage ability. Our results pave the way for further developing self‐cleaning textile coatings for the rapid deactivation of highly infectious pathogenic bacteria under both daylight and light‐free conditions.
Wearable personal protective equipment that is decorated with photoactive self‐cleaning materials capable of actively neutralizing biological pathogens is in high demand. Here, we developed a series of solution‐processable, crystalline porous materials capable of addressing this challenge. Textiles coated with these materials exhibit a broad range of functionalities, including spontaneous reactive oxygen species (ROS) generation upon absorption of daylight, and long‐term ROS storage in dark conditions. The ROS generation and storage abilities of these materials can be further improved through chemical engineering of the precursors without altering the three‐dimensional assembled superstructures. In comparison with traditional TiO2or C3N4self‐cleaning materials, the fluorinated molecular coating material HOF‐101‐F shows a 10‐ to 60‐fold enhancement of ROS generation and 10‐ to 20‐fold greater ROS storage ability. Our results pave the way for further developing self‐cleaning textile coatings for the rapid deactivation of highly infectious pathogenic bacteria under both daylight and light‐free conditions.
more » « less- NSF-PAR ID:
- 10362697
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 134
- Issue:
- 8
- ISSN:
- 0044-8249
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The rapid anthropomorphic emission of greenhouse gases is contributing to global climate change, resulting in the increased frequency of extreme weather events, including unexpected snow, frost, and ice accretion in warmer regions that typically do not encounter these conditions. Adverse weather events create challenges for energy systems such as wind turbines and photovoltaics. To maintain energy efficiently and operational fidelity, snow, frost, and ice need to be removed efficiently and rapidly. State‐of‐the‐art removal methods are energy‐intensive (energy density > 30 J cm−2) and slow (>1 min). Here, pulsed Joule heating is developed on transparent self‐cleaning interfaces, demonstrating interfacial desnowing, defrosting, and deicing with energy efficiency (energy density < 10 J cm−2) and rapidity (≈1 s) beyond what is currently available. The transparency and self‐cleaning are tailored to remove both snow and dust while ensuring minimal interference with optical light absorption. It is experimentally demonstrated a multi‐functional coating material on a commercial photovoltaic cell, demonstrating efficient energy generation recovery and rapid ice/snow removal with minimal energy consumption. Through the elimination of accretion, this technology can potentially widen the applicability of photovoltaics and wind technologies to globally promising locations, potentially further reducing greenhouse gas emissions and global climate change.
-
more » « less
Ever-increasing demands for energy, particularly being environmentally friendly have promoted the transition from fossil fuels to renewable energy.1Lithium-ion batteries (LIBs), arguably the most well-studied energy storage system, have dominated the energy market since their advent in the 1990s.2However, challenging issues regarding safety, supply of lithium, and high price of lithium resources limit the further advancement of LIBs for large-scale energy storage applications.3Therefore, attention is being concentrated on an alternative electrochemical energy storage device that features high safety, low cost, and long cycle life. Rechargeable aqueous zinc-ion batteries (ZIBs) is considered one of the most promising alternative energy storage systems due to the high theoretical energy and power densities where the multiple electrons (Zn2+) . In addition, aqueous ZIBs are safer due to non-flammable electrolyte (e.g., typically aqueous solution) and can be manufactured since they can be assembled in ambient air conditions.4As an essential component in aqueous Zn-based batteries, the Zn metal anode generally suffers from the growth of dendrites, which would affect battery performance in several ways. Second, the led by the loose structure of Zn dendrite may reduce the coulombic efficiency and shorten the battery lifespan.5
Several approaches were suggested to improve the electrochemical stability of ZIBs, such as implementing an interfacial buffer layer that separates the active Zn from the bulk electrolyte.6However, the and thick thickness of the conventional Zn metal foils remain a critical challenge in this field, which may diminish the energy density of the battery drastically. According to a theretical calculation, the thickness of a Zn metal anode with an areal capacity of 1 mAh cm-2is about 1.7 μm. However, existing extrusion-based fabrication technologies are not capable of downscaling the thickness Zn metal foils below 20 μm.
Herein, we demonstrate a thickness controllable coating approach to fabricate an ultrathin Zn metal anode as well as a thin dielectric oxide separator. First, a 1.7 μm Zn layer was uniformly thermally evaporated onto a Cu foil. Then, Al2O3, the separator was deposited through sputtering on the Zn layer to a thickness of 10 nm. The inert and high hardness Al2O3layer is expected to lower the polarization and restrain the growth of Zn dendrites. Atomic force microscopy was employed to evaluate the roughness of the surface of the deposited Zn and Al2O3/Zn anode structures. Long-term cycling stability was gauged under the symmetrical cells at 0.5 mA cm-2for 1 mAh cm-2. Then the fabricated Zn anode was paired with MnO2as a full cell for further electrochemical performance testing. To investigate the evolution of the interface between the Zn anode and the electrolyte, a home-developed in-situ optical observation battery cage was employed to record and compare the process of Zn deposition on the anodes of the Al2O3/Zn (demonstrated in this study) and the procured thick Zn anode. The surface morphology of the two Zn anodes after circulation was characterized and compared through scanning electron microscopy. The tunable ultrathin Zn metal anode with enhanced anode stability provides a pathway for future high-energy-density Zn-ion batteries.
Obama, B., The irreversible momentum of clean energy.
Science 2017, 355 (6321), 126-129.Goodenough, J. B.; Park, K. S., The Li-ion rechargeable battery: a perspective.
J Am Chem Soc 2013, 135 (4), 1167-76.Li, C.; Xie, X.; Liang, S.; Zhou, J., Issues and Future Perspective on Zinc Metal Anode for Rechargeable Aqueous Zinc‐ion Batteries.
Energy & Environmental Materials 2020, 3 (2), 146-159.Jia, H.; Wang, Z.; Tawiah, B.; Wang, Y.; Chan, C.-Y.; Fei, B.; Pan, F., Recent advances in zinc anodes for high-performance aqueous Zn-ion batteries.
Nano Energy 2020, 70 .Yang, J.; Yin, B.; Sun, Y.; Pan, H.; Sun, W.; Jia, B.; Zhang, S.; Ma, T., Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives.
Nanomicro Lett 2022, 14 (1), 42.Yang, Q.; Li, Q.; Liu, Z.; Wang, D.; Guo, Y.; Li, X.; Tang, Y.; Li, H.; Dong, B.; Zhi, C., Dendrites in Zn-Based Batteries.
Adv Mater 2020, 32 (48), e2001854.Acknowledgment
This work was partially supported by the U.S. National Science Foundation (NSF) Award No. ECCS-1931088. S.L. and H.W.S. acknowledge the support from the Improvement of Measurement Standards and Technology for Mechanical Metrology (Grant No. 22011044) by KRISS.
Figure 1
-
more » « less
Abstract A stable, synchronized colony of whitefly (
Bemisia tabaci MEAM1 Gennadius) was established in a single ~30 cu.ft. reach‐in incubator and supported on cabbage host plants which were grown in a 2 × 2′ mesh cage without the need for a greenhouse or dedicated growth rooms. The colony maintenance, including cage cleaning and rotation of plants, was reduced to less than 10 h per week and executed by minimally experienced researchers. In our hands, this method was approximately 10‐fold less expensive in personnel and materials than current typical implementations. A predator‐prey model of whitefly colony maintenance that included whitefly proliferation and host plant health was developed to better understand and avoid colony collapse. This quantitative model can be applied to inform decisions such as inoculum planning and is a mathematical framework to assess insect control strategies. Extensive measurements of colony input and output (such as image analysis of leaf area and whitefly population size) were performed to define basic ‘feedback control’ parameters to gain reproducibility of this inherently unstable scaled‐down whitefly colony. Quantitative transfer of ~100 whiteflies repeatedly produced more than 5000 adult whiteflies over a 6‐week, two‐generation period. Larger scale experimentation could be easily accommodated by transferring adult whiteflies from the maintenance colony with a low flow vacuum capture device. This approach to colony maintenance would be useful to programs that lack extensive plant growth room or greenhouse access and require a “clean” implementation that will not contaminate an axenic tissue culture laboratory. -
more » « less
Abstract High‐density data storage devices based on organic and polymer materials are currently restricted by two key issues, size limitations and uniformity of memory cells. Herein, one triblock polymer is synthesized by ring‐opening metathesis polymerization, where the polymer contains an electron‐donor‐acceptor (A1D) segment, an electron‐acceptor (A2) segment, and a hydrophilic segment, that shows ternary memory behavior in a conventional sandwich‐type device. The polymers that have monodisperse molecular weight dispersity self‐assemble into nanomicelles with a uniform size of 80 nm. Each nanomicelle is composed of an A1DA2‐type hydrophobic core stabilized with a hydrophilic shell. Nanobowls based on conductive oxide are prepared via the template method, wherein the nanomicelles are present as independent nanoscale memory units to produce an array of micelle matrices. Investigations of the resulting nanomemory device using conductive atomic force microscopy show that the micelles exhibit a predominant semiconductor memory behavior. Compared to traditional ternary devices with a memory unit size of ≈1 mm, this innovative fabrication method based on arrayed uniform nanomicelles downscales the size of storage cells to 80 nm. Furthermore, the described system leads to a greatly enhanced storage density (>108times over the same area), which opens up new paths for further development of ultrahigh‐density data storage devices.
