Local laser‐induced oxidation is an extremely valuable technique to perform high‐throughput optimization across multidimensional parameter sets. In this work, a versatile method is presented for the synthesis of titanium dioxide (TiO2) thin‐films with varying crystalline structures through the use of localized, visible, continuous‐wave laser‐processing. By controlling the laser intensity and the exposure time, the conversion of amorphous titanium disulfide (
Titanium dioxide (TiO2) has been used in numerous paintings since its creation in the early 1920s. However, due to this relatively recent adoption by the art world, we have limited knowledge about the nature and risk of degradation in museum environments. This study expands on the existing understanding of TiO2facilitated degradation of linseed oil, by examining the effect of visible light and crystallographic phase (either anatase or rutile) on the reactivity of TiO2. The present approach is based on a combination of experimental chemical characterization with computational calculation through Density Functional Theory (DFT) modeling of the TiO2-oil system. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FT-IR) enabled the identification of characteristic degradation products during UV and visible light aging of both rutile and anatase based paints in comparison to BaSO4and linseed oil controls. In addition, cratering and cracking of the paint surface in TiO2based paints, aged under visible and UV–vis illumination, were observed through Scanning Electron Microscopy (SEM). Finally, Density Functional Theory (DFT) modeling of interactions between anatase TiO2and oleic acid, a fatty acid component of linseed oil, to form a charge transfer complex explains one possible mechanism for the visible light activity observed in artificial aging. Visible light excitation of this complex sensitizes TiO2by injecting an electron into the conduction band of TiO2to generate reactive oxygen species and subsequent degradation of the oil binder by various mechanisms (e.g., formation of an oleic acid cation radical and other oxidation products).
- Award ID(s):
- 1743748
- NSF-PAR ID:
- 10368244
- Publisher / Repository:
- Springer Science + Business Media
- Date Published:
- Journal Name:
- Heritage Science
- Volume:
- 10
- Issue:
- 1
- ISSN:
- 2050-7445
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract a ‐TiS2) precursor films into distinct phases of TiO2is achieved and a laser‐induced oxidation phase diagram is constructed with the resulting material phases, including anatase, rutile, and black TiO2. By utilizing the dependence of phase formation on the rate and duration of laser energy input, mixtures of anatase and rutile phases are fabricated with controlled spatial arrangements. Photocatalytic properties of the synthesized films are evaluated using the degradation of nitrogen oxide (NOx) gas under UV illumination and an organic dye under white‐light illumination, revealing that mixtures of anatase and rutile phases demonstrate superior photocatalytic activity. The laser‐induced oxidation method highlighted showcases a strategy for precisely tailored phase composition for directly tunable properties, paving the way for in‐depth studies into structure‐property relationships in photocatalysis and other applications of metal oxide films. -
more » « less
Abstract Kohn–Sham density functional theory (DFT)‐based searches for hypothetical catalysts are too computationally demanding for wide searches through diverse materials space. Here, the accuracy of computational alchemy schemes on carbides, nitrides, and oxides is assessed. With a single set of reference DFT calculations, computational alchemy approximates adsorbate binding energies (BEs) on a large number of hypothetical catalysts surfaces with negligible computational cost. Analogous to previous studies on metal alloys, computational alchemy predicts adsorbate BEs on rocksalt TiC(111), TiN(100), and TiO(100) materials, which have no bandgap, in close agreement with DFT results (with mean unsigned errors up to 0.33 eV). In contrast, it is found that semiconducting systems such as rutile TiO2(110), rutile SnO2(110), and rocksalt ZnO(100) can present more significant challenges. This work identifies these challenges being linked to the density of states at the Fermi level and by adding Pt dopants in the surface layer of TiO2, it is shown that computational alchemy can become more reliable with non‐transition metal systems. This remedy provides insight that promotes computational alchemy for broad searches for catalyst active sites through materials space beyond transition metal alloys.
-
more » « less
Abstract A mesoporous TiO2−
x material comprised of small, crystalline, vacancy‐rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer‐derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO2−x . When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red‐shift in their UV/Vis absorption and long‐lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO2reduction. -
more » « less
Abstract A mesoporous TiO2−
x material comprised of small, crystalline, vacancy‐rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer‐derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO2−x . When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red‐shift in their UV/Vis absorption and long‐lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO2reduction. -
more » « less
Abstract The structures of zinc carbene ZnCH2and zinc carbyne HZnCH, and the conversion transition states between them are optimized at B3LYP/aug‐cc‐pVTZ, MP2/aug‐cc‐pVTZ, and CCSD/aug‐cc‐pVTZ levels of theory. The thermodynamic energies with CCSD(T) method are further extrapolated to basis set limit through a series of basis sets of aug‐cc‐pVXZ (X=D, T, Q, 5). The Zn−C bonding characteristics are interpreted by molecular plots, Laplacian of density plots, the integrated delocalization indices, net atomic charges, and derived atomic hardness. On the one hand, the studies demonstrated the efficiency of DFT method in structure optimizations and the accuracy of CBS method in obtaining thermodynamic energies; On the other hand, the density analysis of CCSD/aug‐cc‐pVDZ density demonstrates that both the sharing interaction and ionic interaction are important in ZnCH2ad HZnCH. The3B1state of ZnCH2is the global minimum and formed in visible light, but its small bond dissociation energy (47.0 kcal/mol) cannot keep the complex intact under UV light (79.4–102.1 kcal/mol). However, the3Σ−state of HZnCH can survive the UV light due to the greater Zn−C dissociation energy (100.7 kcal/mol). The delocalization indices of Zn…C in both3B1of ZnCH2(0.777) and the3Σ−state of HZnCH (0.785) are close to the delocalization index of the single C−C bond of ethane (0.841), i. e. the nomenclature of Zinc carbene and Zinc carbyne is incorrect. The stronger Zn−C bond in the3Σ−state of HZnCH than in the3B1state of ZnCH2can be attributed to the larger charge separation in the former. It was found that the Zn−C bonds in related Zinc organic compounds were also single bonds no matter whether the organic groups are CR, CR2, or CR3. The ionic interactions were discussed in terms of the atomic hardness that were in turn related to ionization energy and electron affinity. The unique combination of covalent and ionic characteristics in the Zn−C bonds of organic Zinc compounds could be the origin of many interesting applications of organic Zinc reagents.
