An official website of the United States government
Abstract Electrode architectures significantly influence the electrochemical performance, flexibility, and applications of lithium‐ion batteries (LiBs). However, the conventional bar coating for fabricating electrodes limits the addition of customized architecture or patterns. In this study, as a novel approach, patterns are integrated into electrodes through large‐scale roll‐to‐roll (R2R) flexographic printing. Additionally, flexible, recyclable, and biodegradable paper are innovatively used as a printing substrate during printing LiBs manufacturing, which exhibited superior printability. Moreover, the paper is modified with a thin‐layer Al2O3to function as the separator in the printed LiB. The Al2O3‐coated paper enables an admirable wettability for printing, excellent mechanical properties for high‐speed R2R manufacturing, and outstanding thermal stability for the safe and stable operation of LiBs. The assembled paper cells exhibit nearly 100% discharge capacity retention after 1000 cycles at 3 C and outstanding rate performance. This work inspires future large‐scale microbatteries manufacturing integrated with high‐resolution architecture designs.
more »
« less
Boolean and Elementary Algebra with a Roll‐To‐Roll Printed Electrochemical Memristor
Abstract A non‐volatile conjugated polymer‐based electrochemical memristor (cPECM), derived from sodium 4‐[(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methoxy]butane‐2‐sulfonate (S‐EDOT), is fabricated through roll‐to‐roll printing and exhibited neuromorphic properties. The 3‐terminal device employed a “read” channel where conductivity of the water‐soluble, self‐doped S‐PEDOT is equated to synaptic weight and was electrically decoupled from the programming electrode. For the model system, a +2500 mV programming pulse of 100 ms duration resulted in a 0.136 μS resolution in conductivity change, giving over 1000 distinct conductivity states for one cycle. The minimum programming power requirements of the cPECM was 0.31 pJ mm−2and with advanced printing techniques, a 0.1 fJ requirement for a 20 μm device is achievable. The mathematical operations of addition, subtraction, multiplication, and division are demonstrated with a single cPECM, as well as the logic gates AND, OR, NAND, and NOR. This demonstration of a printed cPECM is the first step toward the implementation of a mass produced electrochemical memristor that combines information storage and processing and may allow for the realization of printable artificial neural networks.
more »
« less
- PAR ID:
- 10370448
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 7
- Issue:
- 5
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Electrochemical‐based memristors are highly attractive that are capable of nonvolatile analog tuning, long‐term state stability, low power consumption, device scalability, and fast switching speeds. Through the combination of film deposition techniques, i.e., vapor phase polymerization and screen printing, fabrication of a poly(4‐(6‐hexyl)‐4H‐dithieno[3,2‐b:2′,3′‐d]pyrrole) (p6DTP)‐based synaptic‐emulating three‐terminal memristor is designed. Through voltage‐driven pulse programming, and square waves with an amplitude of 100 mV and duration of 100 msec, the device exhibits a power consumption of 1 pJmm−2per synaptic event. By analyzing the fundamental operational trends of the p6DTP‐based device, simple and advanced integrated applications can be demonstrated along with synaptic‐like responses. This effort is the first presentation of the vapor phase polymerization technique for any dithienopyrrole‐based monomers, along with the physical implementation of any memristive system as an advanced logical circuit, demonstrated here as a cascaded combinational logic gate.more » « less
-
Abstract Roll-to-Roll (R2R) printing techniques are promising for high-volume continuous production of substrate-based products, as opposed to sheet-to-sheet (S2S) approach suited for low-volume work. However, meeting the tight alignment tolerance requirements of additive multi-layer printed electronics specified by device resolution that is usually at micrometer scale has become a major challenge in R2R flexible electronics printing, preventing the fabrication technology from being transferred from conventional S2S to high-speed R2R production. Print registration in a R2R process is to align successive print patterns on the flexible substrate and to ensure quality printed devices through effective control of various process variables. Conventional model-based control methods require an accurate web-handling dynamic model and real-time tension measurements to ensure control laws can be faithfully derived. For complex multistage R2R systems, physics-based state-space models are difficult to derive, and real-time tension measurements are not always acquirable. In this paper, we present a novel data-driven model predictive control (DD-MPC) method to minimize the multistage register errors effectively. We show that the DD-MPC can handle multi-input and multi-output systems and obtain the plant model from sensor data via an Eigensystem Realization Algorithm (ERA) and Observer Kalman filter identification (OKID) system identification method. In addition, the proposed control scheme works for systems with partially measurable system states.more » « less
-
Paper-based analytical devices (PADs) offer a low-cost, user-friendly platform for rapid point-of-use testing. Without scalable fabrication methods, however, few PADs make it out of the academic laboratory and into the hands of end users. Previously, wax printing was considered an ideal PAD fabrication method, but given that wax printers are no longer commercially available, alternatives are needed. Here, we present one such alternative: the air-gap PAD. Air-gap PADs consist of hydrophilic paper test zones, separated by “air gaps” and affixed to a hydrophobic backing with double-sided adhesive. The primary appeal of this design is its compatibility with roll-to-roll equipment for large-scale manufacturing. In this study, we examine design considerations for air-gap PADs, compare the performance of wax-printed and air-gap PADs, and report on a pilot-scale roll-to-roll production run of air-gap PADs in partnership with a commercial test-strip manufacturer. Air-gap devices performed comparably to their wax-printed counterparts in Washburn flow experiments, a paper-based titration, and a 12-lane pharmaceutical screening device. Using roll-to-roll manufacturing, we produced 2700 feet of air-gap PADs for as little as $0.03 per PAD.more » « less
-
Abstract A major challenge for graphene applications is the lack of mass production technology for large‐scale and high‐quality graphene growth and transfer. Here, a roll‐to‐roll (R2R) dry transfer process for large‐scale graphene grown by chemical vapor deposition is reported. The process is fast, controllable, and environmentally benign. It avoids chemical contamination and allows the reuse of graphene growth substrates. By controlling tension and speed of the R2R dry transfer process, the electrical sheet resistance is achieved as 9.5 kΩ sq−1, the lowest ever reported among R2R dry transferred graphene samples. The R2R dry transferred samples are used to fabricate graphene‐based field‐effect transistors (GFETs) on polymer. It is demonstrated that these flexible GFETs feature a near‐zero doping level and a gate leakage current one to two orders of magnitude lower than those fabricated using wet‐chemical etched graphene samples. The scalability and uniformity of the R2R dry transferred graphene is further demonstrated by successfully transferring a 3 × 3 in2sample and measuring its field‐effect mobility with 36 millimeter‐scaled GFETs evenly spaced on the sample. The field‐effect mobility of the R2R dry transferred graphene is determined to be 205 ± 36 cm2 V−1.more » « less
