skip to main content

Title: Mechanical effects of canes on standing posture: beyond perceptual information
Abstract Background

Numerous studies showed that postural balance improves through light touch on a stable surface highlighting the importance of haptic information, seemingly downplaying the mechanical contributions of the support. The present study examined the mechanical effects of canes for assisting balance in healthy individuals challenged by standing on a beam.


Sixteen participants supported themselves with two canes, one in each hand, and applied minimal, preferred, or maximum force onto the canes. They positioned the canes in the frontal plane or in a tripod configuration. Statistical analysis used a linear mixed model to evaluate the effects on the center of pressure and the center of mass.


The canes significantly reduced the variability of the center of pressure and the center of mass to the same level as when standing on the ground. Increasing the exerted force beyond the preferred level yielded no further benefits, although in the preferred force condition, participants exploited the altered mechanics by resting their arms on the canes. The tripod configuration allowed for larger variability of the center of pressure in the task-irrelevant anterior–posterior dimension. High forces had a destabilizing effect on the canes: the displacement of the hand on the cane handle increased with the force.


Given this static instability, these results show that using canes can provide not only mechanical benefits but also challenges. From a control perspective, effort can be reduced by resting the arms on the canes and by channeling noise in the task-irrelevant dimensions. However, larger forces exerted onto the canes can also have destabilizing effects and the instability of the canes needs to be counteracted, possibly by arm and shoulder stiffness. Insights into the variety of mechanical effects is important for the design of canes and the instructions of how to use them.

more » « less
Award ID(s):
1723998 1724135
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Springer Science + Business Media
Date Published:
Journal Name:
Journal of NeuroEngineering and Rehabilitation
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The Pedersen component of the Lorentz force produces an acceleration that is generally in the zonal direction in much of the dawn and dusk sectors in the auroral oval. During geomagnetically disturbed conditions, as the neutral flow begins to accelerate through the ion drag force and the flow speeds increase, a balance develops in the meridional direction between the Coriolis, curvature, and pressure gradient forces, which are dominant in the lower thermosphere. The gradient wind equation that describes this balance predicts that the cyclonic flow on the dawn side is limited to the so‐called regular solution, which has a maximum value of twice the geostrophic wind speed. The anticyclonic flow on the dusk side, on the other hand, can satisfy either the regular or anomalous solution with a transition at twice the geostrophic wind speed. The anomalous flow solutions have wind speeds significantly greater than the transition value, but are limited by the inertial wind value, that is, the value that corresponds to a balance between the curvature and Coriolis forces. The analysis is carried out to show this result, which indicates that a significant quantitative asymmetry is expected between the dawn‐ and dusk‐side flow, as is observed and has been shown in both observations and a number of numerical modeling studies. Implications for the wind distribution of perturbed pressure gradients and inertial instability are discussed.

    more » « less
  2. Abstract

    The hydrostatic equilibrium addresses the approximate balance between the positive force of the vertical pressure gradient and the negative gravity force and has been widely assumed for atmospheric applications. The hydrostatic imbalance of the mean atmospheric state for the acceleration of vertical motions in the vertical momentum balance is investigated using tower, the global positioning system radiosonde, and Doppler lidar and radar observations throughout the diurnally varying atmospheric boundary layer (ABL) under clear-sky conditions. Because of the negligibly small mean vertical velocity, the acceleration of vertical motions is dominated by vertical variations of vertical turbulent velocity variances. The imbalance is found to be mainly due to the vertical turbulent transport of changing air density as a result of thermal expansion/contraction in response to air temperature changes following surface temperature changes. In contrast, any pressure change associated with air temperature changes is small, and the positive vertical pressure-gradient force is strongly influenced by its background value. The vertical variation of the turbulent velocity variance from its vertical increase in the lower convective boundary layer (CBL) to its vertical decrease in the upper CBL is observed to be associated with the sign change of the imbalance from positive to negative due to the vertical decrease of the positive vertical pressure-gradient force and the relative increase of the negative gravity force as a result of the decreasing upward transport of the low-density air. The imbalance is reduced significantly at night but does not steadily approach zero. Understanding the development of hydrostatic imbalance has important implications for understanding large-scale atmosphere, especially for cloud development.

    Significance Statement

    It is well known that the hydrostatic imbalance between the positive pressure-gradient force due to the vertical decrease of atmospheric pressure and the negative gravity forces in the vertical momentum balance equation has important impacts on the vertical acceleration of atmospheric vertical motions. Vertical motions for mass, momentum, and energy transfers contribute significantly to changing atmospheric dynamics and thermodynamics. This study investigates the often-assumed hydrostatic equilibrium and investigate how the hydrostatic imbalance is developed using field observations in the atmospheric boundary layer under clear-sky conditions. The results reveal that hydrostatic imbalance can develop from the large-eddy turbulent transfer of changing air density in response to the surface diabatic heating/cooling. The overwhelming turbulence in response to large-scale thermal forcing and mechanical work of the vast Earth surface contributes to the hydrostatic imbalance on large spatial and temporal scales in numerical weather forecast and climate models.

    more » « less
  3. Principles from human-human physical interaction may be necessary to design more intuitive and seamless robotic devices to aid human movement. Previous studies have shown that light touch can aid balance and that haptic communication can improve performance of physical tasks, but the effects of touch between two humans on walking balance has not been previously characterized. This study examines physical interaction between two persons when one person aids another in performing a beam-walking task. 12 pairs of healthy young adults held a force sensor with one hand while one person walked on a narrow balance beam (2 cm wide x 3.7 m long) and the other person walked overground by their side. We compare balance performance during partnered vs. solo beam-walking to examine the effects of haptic interaction, and we compare hand interaction mechanics during partnered beam-walking vs. overground walking to examine how the interaction aided balance. While holding the hand of a partner, participants were able to walk further on the beam without falling, reduce lateral sway, and decrease angular momentum in the frontal plane. We measured small hand force magnitudes (mean of 2.2 N laterally and 3.4 N vertically) that created opposing torque components about the beam axis and calculated the interaction torque, the overlapping opposing torque that does not contribute to motion of the beam-walker’s body. We found higher interaction torque magnitudes during partnered beam-walking vs . partnered overground walking, and correlation between interaction torque magnitude and reductions in lateral sway. To gain insight into feasible controller designs to emulate human-human physical interactions for aiding walking balance, we modeled the relationship between each torque component and motion of the beam-walker’s body as a mass-spring-damper system. Our model results show opposite types of mechanical elements (active vs . passive) for the two torque components. Our results demonstrate that hand interactions aid balance during partnered beam-walking by creating opposing torques that primarily serve haptic communication, and our model of the torques suggest control parameters for implementing human-human balance aid in human-robot interactions. 
    more » « less
  4. Context: An Optimizing Performance through Intrinsic Motivation and Attention for Learning theory-based motor learning intervention delivering autonomy support and enhanced expectancies (EE) shows promise for reducing cognitive-motor dual-task costs, or the relative difference in primary task performance when completed with and without a secondary cognitive task, that facilitate adaptive injury-resistant movement response. The current pilot study sought to determine the effectiveness of an autonomy support versus an EE-enhanced virtual reality motor learning intervention to reduce dual-task costs during single-leg balance. Design: Within-subjects 3 × 3 trial. Methods: Twenty-one male and 24 female participants, between the ages of 18 and 30 years, with no history of concussion, vertigo, lower-extremity surgery, or lower-extremity injuries the previous 6 months, were recruited for training sessions on consecutive days. Training consisted of 5 × 8 single-leg squats on each leg, during which all participants mimicked an avatar through virtual reality goggles. The autonomy support group chose an avatar color, and the EE group received positive kinematic biofeedback. Baseline, immediate, and delayed retention testing consisted of single-leg balancing under single- and dual-task conditions. Mixed-model analysis of variances compared dual-task costs for center of pressure velocity and SD between groups on each limb. Results: On the right side, dual-task costs for anterior–posterior center of pressure mean and SD were reduced in the EE group (mean Δ = −51.40, Cohen d  = 0.80 and SD Δ = −66.00%, Cohen d  = 0.88) compared with the control group (mean Δ = −22.09, Cohen d  = 0.33 and SD Δ = −36.10%, Cohen d  = 0.68) from baseline to immediate retention. Conclusions: These findings indicate that EE strategies that can be easily implemented in a clinic or sport setting may be superior to task-irrelevant AS approaches for influencing injury-resistant movement adaptations. 
    more » « less
  5. null (Ed.)
    Many daily tasks involve the collaboration of both hands. Humans dexterously adjust hand poses and modulate the forces exerted by fingers in response to task demands. Hand pose selection has been intensively studied in unimanual tasks, but little work has investigated bimanual tasks. This work examines hand poses selection in a bimanual high-precision-screwing task taken from watchmaking. Twenty right-handed subjects dismounted a screw on the watch face with a screwdriver in two conditions. Results showed that although subjects used similar hand poses across steps within the same experimental conditions, the hand poses differed significantly in the two conditions. In the free-base condition, subjects needed to stabilize the watch face on the table. The role distribution across hands was strongly influenced by hand dominance: the dominant hand manipulated the tool, whereas the nondominant hand controlled the additional degrees of freedom that might impair performance. In contrast, in the fixed-base condition, the watch face was stationary. Subjects used both hands even though single hand would have been sufficient. Importantly, hand poses decoupled the control of task-demanded force and torque across hands through virtual fingers that grouped multiple fingers into functional units. This preference for bimanual over unimanual control strategy could be an effort to reduce variability caused by mechanical couplings and to alleviate intrinsic sensorimotor processing burdens. To afford analysis of this variety of observations, a novel graphical matrix-based representation of the distribution of hand pose combinations was developed. Atypical hand poses that are not documented in extant hand taxonomies are also included. NEW & NOTEWORTHY We study hand poses selection in bimanual fine motor skills. To understand how roles and control variables are distributed across the hands and fingers, we compared two conditions when unscrewing a screw from a watch face. When the watch face needed positioning, role distribution was strongly influenced by hand dominance; when the watch face was stationary, a variety of hand pose combinations emerged. Control of independent task demands is distributed either across hands or across distinct groups of fingers. 
    more » « less