skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Cobalt telluride electrocatalyst for selective electroreduction of CO2 to value-added chemicals
Abstract Recent emphasis on carbon dioxide utilization has necessitated the exploration of different catalyst compositions other than copper-based systems that can significantly improve the activity and selectivity towards specific CO 2  reduction products at low applied potential. In this study, a binary CoTe has been reported as an efficient electrocatalyst for CO 2 reduction in aqueous medium under ambient conditions at neutral pH. CoTe showed high Faradaic efficiency and selectivity of 86.83 and 75%, respectively, for acetic acid at very low potential of − 0.25 V vs RHE. More intriguingly, C1 products like formic acid was formed preferentially at slightly higher applied potential achieving high formation rate of 547.24 μmol cm −2  h −1  at − 1.1 V vs RHE. CoTe showed better CO2RR activity when compared with Co 3 O 4 , which can be attributed to the enhanced electrochemical activity of the catalytically active transition metal center as well as improved intermediate adsorption on the catalyst surface. While reduced anion electronegativity and improved lattice covalency in tellurides enhance the electrochemical activity of Co, high d-electron density improves the intermediate CO adsorption on the catalyst site leading to CO 2 reduction at lower applied potential and high selectivity for C 2 products. CoTe also shows stable CO2RR catalytic activity for 50 h and low Tafel slope (50.3 mV dec –1 ) indicating faster reaction kinetics and robust functionality. Selective formation of value-added C 2 products with low energy expense can make these catalysts potentially viable for integration with other CO 2 capture technologies thereby, helping to close the carbon loop.  more » « less
Award ID(s):
2102609
PAR ID:
10374289
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Materials for Renewable and Sustainable Energy
Volume:
11
Issue:
2
ISSN:
2194-1459
Page Range / eLocation ID:
115 to 129
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Energy & Environmental Science)
    Metal-free carbon materials have emerged as cost-effective and high-performance catalysts for the production of hydrogen peroxide (H 2 O 2 ) through the two-electron oxygen reduction reaction (ORR). Here, we show that 3D crumpled graphene with controlled oxygen and defect configurations significantly improves the electrocatalytic production of H 2 O 2 . The crumpled graphene electrocatalyst with optimal defect structures and oxygen functional groups exhibits outstanding H 2 O 2 selectivity of 92–100% in a wide potential window of 0.05–0.7 V vs. reversible hydrogen electrode (RHE) and a high mass activity of 158 A g −1 at 0.65 V vs. RHE in alkaline media. In addition, the crumpled graphene catalyst showed an excellent H 2 O 2 production rate of 473.9 mmol gcat −1 h −1 and stability over 46 h at 0.4 V vs. RHE. Moreover, density functional theory calculations revealed the role of the functional groups and defect sites in the two-electron ORR pathway through the scaling relation between OOH and O adsorption strengths. These results establish a structure-mechanism-performance relationship of functionalized carbon catalysts for the effective production of H 2 O 2 . 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Journal of the American Chemical Society)
    The structural stability of nanocatalysts during electrochemical CO2 reduction (CO2RR) is crucial for practical applications. However, highly active nanocatalysts often reconstruct under reductive conditions, requiring stabilization strategies to maintain activity. Here, we demonstrate that the N-heterocyclic carbene (NHC) polymer stabilizes Au nanowire (NW) catalysts for selective CO2 reduction to CO over a broad potential range, enabling coupling with Cu NWs for one-step tandem conversion of CO2 to C2H4. By combining the hydrophobicity of the polystyrene chain and the strong binding of NHC to Au, the polymer stabilizes Au NWs and promotes CO2RR to CO with excellent selectivity (>90%) across −0.4 V to −1.0 V (vs RHE), a significantly broader range than unmodified Au NWs (−0.5 V to −0.7 V). Stable CO2RR at negative potentials yields a high jCO of 142 A/g Au at −1.0 V. In situ ATR-IR analysis indicates that the NHC polymer regulates the water microenvironment and suppresses hydrogen evolution at high overpotential. Moreover, NHC-Au NWs maintain excellent stability during 10 h of CO2RR testing, preserving the NW morphology and catalytic performance, while unmodified NWs degrade into nanoparticles with reduced activity and selectivity. NHC-Au NWs can be coupled with Cu NWs in a flow cell to catalyze CO2RR to C2H4 with 58% efficiency and a partial current density of 70 mA/cm2 (overall C2 product efficiency of 65%). This study presents an adaptable strategy to enhance the catalyst microenvironment, ensure stability, and enable efficient tandem CO2 conversion into value-added hydrocarbons. 
    more » « less
  3. ; ; ; (, Catalysis Science & Technology)
    Identifying new catalyst composition for carbon dioxide electroreduction to high-value products has been the center of attraction over the last several years. In this article, nickel selenide (NiSe 2 ) has been identified as a high-efficiency electrocatalyst for CO 2 electroreduction at neutral pH. Interestingly, NiSe 2 shows high selectivity towards specific reduction products, forming carbon-rich C2 products like ethanol and acetic acid exclusively at lower applied potential with 98.45% faradaic efficiency, while C1 products formic acid and carbon monoxide formed preferentially at higher applied potential. More importantly, the C2 products such as acetic acid and ethanol are obtained at very low applied potential, which further corroborates the novelty of this catalyst in CO 2 utilization with minimal energy expense. The NiSe 2 catalyst surface has been studied through density functional theory calculations which show that the adsorption energy of the CO intermediate on the NiSe 2 surface is optimal for extensive reduction through formation of C–C bonds but not strong enough for surface passivation, thus leading to high selectivity for C2 products. Such high efficiency of the catalyst can be a result of increased covalency of the selenide anion along with a high d-electron density of the Ni center. The hydrothermally synthesized NiSe 2 sample also shows high activity for oxygen evolution through electrocatalytic water splitting in alkaline medium, effectively making it a bifunctional catalyst which can lower the concentration of the atmospheric pollutant CO 2 while at the same time enriching the air with O 2 . 
    more » « less
  4. ; ; ; ; ; ; ; ; (, Journal of Materials Chemistry A)
    null (Ed.)
    The selectivity towards a specific C 2+ product, such as ethylene (C 2 H 4 ), is sensitive to the surface structure of copper (Cu) catalysts in carbon dioxide (CO 2 ) electro-reduction. The fundamental understanding of such sensitivity can guide the development of advanced electrocatalysts, although it remains challenging at the atomic level. Here we demonstrated that planar defects, such as stacking faults, could drive the electrocatalysis of CO 2 -to-C 2 H 4 conversion with higher selectivity and productivity than Cu(100) facets in the intermediate potential region (−0.50 ∼ −0.65 V vs. RHE). The unique right bipyramidal Cu nanocrystals containing a combination of (100) facets and a set of parallel planar defects delivered 67% faradaic efficiency (FE) for C 2 H 4 and a partial current density of 217 mA cm −2 at −0.63 V vs. RHE. In contrast, Cu nanocubes with exclusive (100) facets exhibited only 46% FE for C 2 H 4 and a partial current density of 87 mA cm −2 at an identical potential. Both ex situ CO temperature-programmed desorption and in situ Raman spectroscopy analysis implied that the stronger *CO adsorption on planar defect sites facilitates CO generation kinetics, which contributes to a higher surface coverage of *CO and in turn an enhanced reaction rate of C–C coupling towards C 2+ products, especially C 2 H 4 . 
    more » « less
  5. ; ; ; ; ; ; (, ChemCatChem)
    Electrochemical reduction of carbon dioxide (CO2RR) to value-added products is a promising strategy to alleviate the greenhouse gas effect. Molecular catalysts, such as cobalt (II) phthalocyanine (CoPc), are known to be efficient electrocatalysts that are capable of converting CO2 into carbon monoxide (CO). Herein, we report an axial modification strategy to enhance CoPc’s CO2RR performance. After coordinating with axial ligands, the electron density of Co was depleted via π-backbonding. This π-backbonding weakened the Co-CO bond, resulting in rapid desorption of CO. Also, the presence axial ligands elevated the Co dz2 orbital energy, resulting in a significantly enhanced CO2 selectivity, evidenced by an increased faradaic efficiency (FE) from 82% (CoPc) to 91% (pyridine) and 94% (imidazole) at -0.82 V vs. RHE. Density functional theory calculations reveal that axial ligation of CoPc can reduce the energy barrier for CO2 activation and facilitate the formation of *COOH. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email