skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Nickel selenide as an efficient electrocatalyst for selective reduction of carbon dioxide to carbon-rich products
Identifying new catalyst composition for carbon dioxide electroreduction to high-value products has been the center of attraction over the last several years. In this article, nickel selenide (NiSe 2 ) has been identified as a high-efficiency electrocatalyst for CO 2 electroreduction at neutral pH. Interestingly, NiSe 2 shows high selectivity towards specific reduction products, forming carbon-rich C2 products like ethanol and acetic acid exclusively at lower applied potential with 98.45% faradaic efficiency, while C1 products formic acid and carbon monoxide formed preferentially at higher applied potential. More importantly, the C2 products such as acetic acid and ethanol are obtained at very low applied potential, which further corroborates the novelty of this catalyst in CO 2 utilization with minimal energy expense. The NiSe 2 catalyst surface has been studied through density functional theory calculations which show that the adsorption energy of the CO intermediate on the NiSe 2 surface is optimal for extensive reduction through formation of C–C bonds but not strong enough for surface passivation, thus leading to high selectivity for C2 products. Such high efficiency of the catalyst can be a result of increased covalency of the selenide anion along with a high d-electron density of the Ni center. The hydrothermally synthesized NiSe 2 sample also shows high activity for oxygen evolution through electrocatalytic water splitting in alkaline medium, effectively making it a bifunctional catalyst which can lower the concentration of the atmospheric pollutant CO 2 while at the same time enriching the air with O 2 .  more » « less
Award ID(s):
2102609 1710313
PAR ID:
10374288
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Catalysis Science & Technology
Volume:
12
Issue:
15
ISSN:
2044-4753
Page Range / eLocation ID:
4727 to 4739
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Materials for Renewable and Sustainable Energy)
    Abstract Recent emphasis on carbon dioxide utilization has necessitated the exploration of different catalyst compositions other than copper-based systems that can significantly improve the activity and selectivity towards specific CO2 reduction products at low applied potential. In this study, a binary CoTe has been reported as an efficient electrocatalyst for CO2reduction in aqueous medium under ambient conditions at neutral pH. CoTe showed high Faradaic efficiency and selectivity of 86.83 and 75%, respectively, for acetic acid at very low potential of − 0.25 V vs RHE. More intriguingly, C1 products like formic acid was formed preferentially at slightly higher applied potential achieving high formation rate of 547.24 μmol cm−2 h−1 at − 1.1 V vs RHE. CoTe showed better CO2RR activity when compared with Co3O4, which can be attributed to the enhanced electrochemical activity of the catalytically active transition metal center as well as improved intermediate adsorption on the catalyst surface. While reduced anion electronegativity and improved lattice covalency in tellurides enhance the electrochemical activity of Co, high d-electron density improves the intermediate CO adsorption on the catalyst site leading to CO2reduction at lower applied potential and high selectivity for C2products. CoTe also shows stable CO2RR catalytic activity for 50 h and low Tafel slope (50.3 mV dec–1) indicating faster reaction kinetics and robust functionality. Selective formation of value-added C2products with low energy expense can make these catalysts potentially viable for integration with other CO2capture technologies thereby, helping to close the carbon loop. 
    more » « less
  2. ; ; ; (, Nanoscale)
    For the conversion of CO 2 into fuels and chemical feedstocks, hybrid gas/liquid-fed electrochemical flow reactors provide advantages in selectivity and production rates over traditional liquid phase reactors. However, fundamental questions remain about how to optimize conditions to produce desired products. Using an alkaline electrolyte to suppress hydrogen formation and a gas diffusion electrode catalyst composed of copper nanoparticles on carbon nanospikes, we investigate how hydrocarbon product selectivity in the CO 2 reduction reaction in hybrid reactors depends on three experimentally controllable parameters: (1) supply of dry or humidified CO 2 gas, (2) applied potential, and (3) electrolyte temperature. Changing from dry to humidified CO 2 dramatically alters product selectivity from C 2 products ethanol and acetic acid to ethylene and C 1 products formic acid and methane. Water vapor evidently influences product selectivity of reactions that occur on the gas-facing side of the catalyst by adding a source of protons that alters reaction pathways and intermediates. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the National Academy of Sciences)
    null (Ed.)
    Electrochemical CO 2 or CO reduction to high-value C 2+ liquid fuels is desirable, but its practical application is challenged by impurities from cogenerated liquid products and solutes in liquid electrolytes, which necessitates cost- and energy-intensive downstream separation processes. By coupling rational designs in a Cu catalyst and porous solid electrolyte (PSE) reactor, here we demonstrate a direct and continuous generation of pure acetic acid solutions via electrochemical CO reduction. With optimized edge-to-surface ratio, the Cu nanocube catalyst presents an unprecedented acetate performance in neutral pH with other liquid products greatly suppressed, delivering a maximal acetate Faradaic efficiency of 43%, partial current of 200 mA⋅cm −2 , ultrahigh relative purity of up to 98 wt%, and excellent stability of over 150 h continuous operation. Density functional theory simulations reveal the role of stepped sites along the cube edge in promoting the acetate pathway. Additionally, a PSE layer, other than a conventional liquid electrolyte, was designed to separate cathode and anode for efficient ion conductions, while not introducing any impurity ions into generated liquid fuels. Pure acetic acid solutions, with concentrations up to 2 wt% (0.33 M), can be continuously produced by employing the acetate-selective Cu catalyst in our PSE reactor. 
    more » « less
  4. ; ; ; (, Catalysis Science & Technology)
    null (Ed.)
    The electrocatalytic carbon dioxide reduction reaction (CO 2 RR) to produce valuable fuels and chemicals with renewable energy inputs is an attractive route to convert intermittent green energy sources ( e.g. , solar and wind) to chemical energy, alleviate our dependence on fossil fuels, and simultaneously reduce net carbon dioxide emission. However, the generation of reduced multi-carbon products with high energy density and wide applicability from the CO 2 RR, such as oxygenates and hydrocarbons, suffers from high overpotential, slow reaction rate, and low selectivity due to its intrinsic multi-electron transfer nature. Moreover, the involved anodic oxygen evolution reaction (OER) also requires large overpotential and its product O 2 bears limited economic value. The potentially generated reactive oxygen species (ROS) during the OER may also degrade the membrane of a CO 2 reduction electrolyzer. Herein, we review the recent progress in novel integrated strategies to address the aforementioned challenges in the electrocatalytic CO 2 RR. These innovative strategies include (1) concurrent CO 2 electroreduction via co-feeding additional chemicals besides CO 2 gas, (2) tandem CO 2 electroreduction utilizing other catalysts for converting the in situ formed products from the CO 2 RR into more valuable chemicals, and (3) hybrid CO 2 electroreduction through integrating thermodynamically more favourable organic upgrading reactions to replace the anodic OER. We specifically highlight these novel integrated electrolyzer designs instead of focusing on nanostructured engineering of various electrocatalysts, in the hope of inspiring others to approach CO 2 electroreduction from a holistic perspective. The current challenges and future opportunities of electrocatalytic CO 2 reduction will also be discussed at the end. 
    more » « less
  5. ; ; ; ; ; ; (, Energy & Environmental Science)
    Nanostructured Cu catalysts have increased the selectivities and geometric activities for high value C–C coupled (C 2 ) products (ethylene, ethanol, and acetate) in the electrochemical CO (2) reduction reaction (CO (2) RR). The selectivity among the high-value C 2 products is also altered, where for instance the yield of acetate increases with alkalinity and is dependent on the catalyst morphology. The reaction mechanisms behind the selectivity towards acetate vs. other C 2 products remain controversial. In this work, we elucidate the reaction mechanism for acetate formation by using ab initio simulations, a coupled kinetic-transport model, and loading dependent experiments. We find that trends in acetate selectivity can be rationalized from variations in electrolyte pH and the local mass transport properties of the catalyst and not from changes in Cu's intrinsic activity. The selectivity mechanism originates from the transport of ketene, a stable (closed shell) intermediate, away from the catalyst surface into solution where it reacts to form acetate. While this type of mechanism has not yet been discussed in the CO (2) RR, variants of it may explain similar selectivity fluctuations observed for other stable intermediates like CO and acetaldehyde. Our proposed mechanism suggests that acetate selectivity increases with increasing pH, decreasing catalyst roughness and significantly varies with the applied potential. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email