Reduction–oxidation (redox) reactions provide a distinct modality for biological communication that is fundamentally different from the more‐familiar ion‐based electrical modality. Biology uses these two modalities for communication through different systems (immune versus nervous), and uses different mechanisms to control the flow of the charge carriers: the flow of soluble ions is controlled using structural barriers (i.e., membranes) and gates (e.g., membrane‐spanning protein channels), while the flow of insoluble electrons is controlled using redox‐reaction networks. Here, a simple electrochemical approach to pattern catechols onto a flexible polysaccharide hydrogel is reported and it is demonstrated that the patterned catechol regions serve as nodes for the mediated flow of electrons through redox reactions. Electron flow through this node involves the switching of binary redox states (oxidized and reduced) and this node's redox state can be detected (i.e., “read”) by passively observing its optical absorbance, or actively switching its redox‐state electrochemically. Further, this catechol node can be switched through biological mechanisms, and this enables the fabricated catechol node to be embedded within biochemical redox reaction networks to facilitate the spanning of bio‐electronic communication. Thus, it is envisioned that catechols can emerge as a molecular equivalent to a transistor for miniaturize‐able, deployable and sustainable redox‐linked bioelectronics.
Electronic materials that allow the controlled flow of electrons in aqueous media are required for emerging applications that require biocompatibility, safety, and/or sustainability. Here, a composite hydrogel film composed of graphene and catechol is electrofabricated, and that this composite offers synergistic properties is reported. Graphene confers metal‐like conductivity and enables charge‐storage through an electrical double layer mechanism. Catechol confers redox‐activity and enables charge‐storage through a redox mechanism. Importantly, there are two functional populations of catechols: conducting‐catechols (presumably in intimate contact with graphene) allow direct electron‐transfer; and non‐conducting‐catechols (presumably physically separated from graphene) require diffusible mediators to enable electron‐transfer. Using a variety of spectroelectrochemical measurements, that the capacity of the composite for charge‐storage increases in proportion to the extent by which the catechol‐groups can undergo redox‐state switching is demonstrated. To illustrate the broad relevance of this work, how the redox‐state switching can be related to both the charge storage of energy materials and the memory of molecular electronic materials is discussed. The authors believe this work is significant because it demonstrates that: conducting and redox‐active components enable distinctly different mechanisms for charge‐storage and electron‐transfer; these components act synergistically; and mediators provide unique opportunities to extend the capabilities of electronic materials.
more » « less- Award ID(s):
- 1932963
- NSF-PAR ID:
- 10376379
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Interfaces
- Volume:
- 9
- Issue:
- 35
- ISSN:
- 2196-7350
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Proteins are commonly known to transfer electrons over distances limited to a few nanometers. However, many biological processes require electron transport over far longer distances. For example, soil and sediment bacteria transport electrons, over hundreds of micrometers to even centimeters, via putative filamentous proteins rich in aromatic residues. However, measurements of true protein conductivity have been hampered by artifacts due to large contact resistances between proteins and electrodes. Using individual amyloid protein crystals with atomic-resolution structures as a model system, we perform contact-free measurements of intrinsic electronic conductivity using a four-electrode approach. We find hole transport through micrometer-long stacked tyrosines at physiologically relevant potentials. Notably, the transport rate through tyrosines (105s−1) is comparable to cytochromes. Our studies therefore show that amyloid proteins can efficiently transport charges, under ordinary thermal conditions, without any need for redox-active metal cofactors, large driving force, or photosensitizers to generate a high oxidation state for charge injection. By measuring conductivity as a function of molecular length, voltage, and temperature, while eliminating the dominant contribution of contact resistances, we show that a multistep hopping mechanism (composed of multiple tunneling steps), not single-step tunneling, explains the measured conductivity. Combined experimental and computational studies reveal that proton-coupled electron transfer confers conductivity; both the energetics of the proton acceptor, a neighboring glutamine, and its proximity to tyrosine influence the hole transport rate through a proton rocking mechanism. Surprisingly, conductivity increases 200-fold upon cooling due to higher availability of the proton acceptor by increased hydrogen bonding.
-
more » « less
Abstract Time‐dependent density functional theory (TDDFT) was applied to gain insights into the electronic and vibrational spectroscopic properties of an important electron transport mediator, methyl viologen (MV2+). An organic dication, MV2+has numerous applications in electrochemistry that include energy conversion and storage, environmental remediation, and chemical sensing and electrosynthesis. MV2+is easily reduced by a single electron transfer to form a radical cation species (MV•+), which has an intense UV–visible absorption near 600 nm. The redox properties of the MV2+/MV•+couple and light‐sensitivity of MV•+have made the system appealing for photo‐electrochemical energy conversion (e.g., solar hydrogen generation from water) and the study of photo‐induced charge transfer processes through electronic absorption and resonance Raman spectroscopic measurements. The reported work applies leading TDDFT approaches to investigate the electronic and vibrational spectroscopic properties of MV2+and MV•+. Using a conventional hybrid exchange functional (B3‐LYP) and a long‐range corrected hybrid exchange functional (ωB97X‐D3), including with a conductor‐like polarizable continuum model to account for solvation, the electronic absorption and resonance Raman spectra predicted are in good agreement with experiment. Also analyzed are the charge transfer character and natural transition orbitals derived from the TDDFT vertical excitations calculated. The findings and models developed further the understanding of the electronic properties of viologens and related organic redox mediators important in renewable energy applications and serve as a reference for guiding the interpretation of electronic absorption and Raman spectra of the ions.
-
more » « less
Abstract Redox is emerging as an alternative modality for bio‐device communication. In contrast to the more familiar ionic electrical modality: (i) redox involves the flow of electrons through oxidation–reduction reactions; (ii) the aqueous medium is an “insulator” to this electron flow since free electrons do not normally exist in water; and (iii) redox states are intrinsically digital (oxidized and reduced). By exploiting these unique features, a catechol‐based molecular memory film is reported. This memory is fabricated by electrochemically grafting catechol to a chitosan–agarose polysaccharide network to generate a redox‐active but non‐conducting matrix. The redox state of the grafted catechol moieties serves as the 2‐state memory. It is shown that these redox states: can be repeatedly switched by diffusible mediators (electron shuttles); can be easily read electrically or optically; are stable for at least 2 h in the absence of energy; are sensitive to biologically relevant oxidizing and reducing contexts; and can be switched enzymatically. This catechol‐based molecular memory film is a simple circuit element for redox linked bioelectronics.
-
more » « less
Nanoscale spinel lithium manganese oxide is of interest as a high‐rate cathode material for advanced battery technologies among other electrochemical applications. In this work, the synthesis of ultrathin films of spinel lithium manganese oxide (LiMn2O4) between 20 and 200 nm in thickness by room‐temperature electrochemical conversion of MnO grown by atomic layer deposition (ALD) is demonstrated. The charge storage properties of LiMn2O4thin films in electrolytes containing Li+, Na+, K+, and Mg2+are investigated. A unified electrochemical band‐diagram (UEB) analysis of LiMn2O4informed by screened hybrid density functional theory calculations is also employed to expand on existing understanding of the underpinnings of charge storage and stability in LiMn2O4. It is shown that the incorporation of Li+or other cations into the host manganese dioxide spinel structure (λ‐MnO2) stabilizes electronic states from the conduction band which align with the known redox potentials of LiMn2O4. Furthermore, the cyclic voltammetry experiments demonstrate that up to 30% of the capacity of LiMn2O4arises from bulk electronic charge‐switching which does not require compensating cation mass transport. The hybrid ALD‐electrochemical synthesis, UEB analysis, and unique charge storage mechanism described here provide a fundamental framework to guide the development of future nanoscale electrode materials for ion‐incorporation charge storage.
