skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: The influence of additives on polymer matrix mobility and the glass transition
In the region near an interface, the microscopic properties of a glass forming liquid may be perturbed from their equilibrium bulk values. In this work, we probe how the interfacial effects of additive particles dispersed in a matrix can influence the local mobility of the material and its glass transition temperature, T g . Experimental measurements and simulation results indicate that additives, such as nanoparticles, gas molecules, and oligomers, can shift the mobility and T g of a surrounding polymer matrix (even for relatively small concentrations of additive; e.g. , 5–10% by volume) relative to the pure bulk matrix, thus leading to T g enhancement or suppression. Additives thus provide a potential route for modifying the properties of a polymer material without significantly changing its chemical composition. Here we apply the Limited Mobility (LM) model to simulate a matrix containing additive species. We show that both additive concentration, as well as the strength of its very local influence on the surrounding matrix material, will determine whether the T g of the system is raised or lowered, relative to the pure matrix. We demonstrate that incorporation of additives into the simple LM simulation method, which has successfully described the behavior of bulk and thin film glassy solids, leads to direct connections with available experimental and simulation results for a broad range of polymer/additive systems.  more » « less
Award ID(s):
2006504
PAR ID:
10376851
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Soft Matter
Volume:
17
Issue:
2
ISSN:
1744-683X
Page Range / eLocation ID:
376 to 387
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Soft Matter)
    We demonstrate how the temperature dependence of perylene's fluorescence emission spectrum doped in bulk polymer matrices is sensitive to the local glass transition dynamics of the surrounding polymer segments. Focusing on the first fluorescence peak, we show that the intensity ratio I Ratio ( T ) = I Peak ( T )/ I SRR between the first peak and a self referencing region (SRR) has a temperature dependence resulting from the temperature-dependent nonradiative decay pathway of the excited perylene dye that is influenced by its intermolecular collisions with the surrounding polymers segments. For different polymer matrices, poly(methyl methacrylate) (PMMA), polystyrene (PS), poly(2-vinyl pyridine) (P2VP), and polycarbonate (PC), we demonstrate that I Ratio ( T ) exhibits a transition from a non-Arrhenius behavior above the glass transition temperature T g of the polymer to an Arrhenius temperature dependence with constant activation energy E below the T g of the polymer matrix, indicating perylene's sensitivity to cooperative α-relaxation dynamics of the polymer matrix. This transition in temperature dependence allows us to identify a perylene defined local T peryleneg of the surrounding polymer matrix that agrees well with the known T g values of the polymers. We define a fluorescence intensity shift factor in analogy with the Williams–Landel–Ferry (WLF) equation and use literature WLF parameters for the polymer matrix to quantify the calibration factor c f needed to convert the fluorescence intensity ratio to the effective time scale ratio described by the conventional WLF shift factor. This work opens up a new characterization method that could be used to map the local dynamical response of the glass transition in nanoscale polymer materials using appropriate covalent attachment of perylene to polymer chains. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Proceedings of the National Academy of Sciences)
    Debenedetti, P (Ed.)
    Using angle-resolved X-ray photoelectron spectroscopy, sum-frequency generation vibrational spectroscopy, contact angle measurements, and molecular dynamics simulations, we verify that the glass transition temperature (Tg) of polymer glass is lower near the free surface. However, the experimentalTg-gradients showed a linear variation with depth (z) from the free surface, while the simulated equilibriumTg-gradients exhibited a double exponentialz-dependence. In typical simulations,Tgis determined based on the relaxation time of the system reaching a prescribed threshold value at equilibrium. Conversely, the experiments determinedTgby observing the unfreezing of molecular mobility during heating from a kinetically arrested, nonequilibrium glassy state. To investigate the impact of nonequilibrium effects on theTg-gradient, we reduced the thermal annealing time in simulations, allowing the system to fall out of equilibrium. We observe a decrease in the relaxation time and the emergence of a modifiedz-dependence consistent with a linearTg-gradient near the free surface. We further validate the impact of nonequilibrium effects by studying the dependence of theTgon the heating/cooling rate for polymer films of varying thickness (h). Our experimental results reveal significant variations in theTg-heating/cooling rate dependence withhbelow the bulkTg, which are also observed in simulation when the simulated system is not equilibrated. We explain our findings by the reduction in mass density within the inner region of the system under nonequilibrium conditions, as observed in simulation, and recent research indicating a decrease in the localTgof a polymer when placed next to a softer material. 
    more » « less
  3. ; (, Soft Matter)
    null (Ed.)
    Data continue to accrue indicating that experimental techniques may differ in their sensitivity to mobility and glassiness. In this work the Limited Mobility (LM) kinetic model is used to show that two metrics for tracking sample mobility yield quantitatively different results for the glass transition and mobile layer thickness in systems where free surfaces are present. Both LM metrics track the fraction of material that embodies mobile free volume; in one it is relative to that portion of the sample containing any kind (mobile and dormant) of free volume, and in the other it is relative to the overall sample. Without any kind of optimization, use of the latter metric leads to semi-quantitative agreement with experimental film results, both for the mobile layer thickness and the dependence of sample glass transition temperature on film thickness. Connecting the LM predictions with experiment also produces a semi-quantitative mapping between LM model length and temperature scales, and those of real systems. 
    more » « less
  4. ; ; (, Macromolecular Chemistry and Physics)
    Abstract Rubber toughening of glassy polystyrene (PS) has been manufactured commercially for decades as high impact polystyrene, where rubbery poly‐butadiene (PB) inclusions are added to modify the PS matrix response to deformation and impact. In this study, measurements of the local glass transition temperatureTg(z) of PS next to PB rubber are presented, expanding the previous data to a polymer with a much lowerTgvalue (PBTgbulk= −96 °C). After accounting for a small molecule additive present in the commercial PB sample that would otherwise migrate over to the PS domain causing plasticization, it is found that theTg(z) profile in PS next to PB is consistent with previous results. It is also demonstrated that these broad and asymmetric experimentally observedTg(z) profiles are not caused by the migration of low molecular weight chains across the interface by comparing samples made with two different poly(n‐butyl methacrylate) molecular weights. 
    more » « less
  5. ; ; ; ; (, Soft Matter)
    Elastomers embedded with micro- and nanoscale droplets of liquid metal (LM) alloys like eutectic gallium-indium (EGaIn) can exhibit unique combinations of elastic, thermal, and electrical properties that are difficult to achieve using rigid filler. For composites with sufficient concentrations of liquid metal, the LM droplets can form percolating networks that conduct electricity and deform with the surrounding elastomer as the composite is stretched. Surprisingly, experimental measurements performed on LM-embedded elastomers (LMEEs) show that the total electrical resistance of the composite increases only slightly even as the elastomer is stretched to several times its natural length. In contrast, Pouillet's Law would predict an exponential increase in resistance (Ω) with stretch (λ) due to the incompressibility of liquid metal and elastomer. In this manuscript, we perform a computational analysis to examine the unique electromechanical properties of conductive LMEE composites. Our analysis suggests that the gauge factor that quantifies electromechanical coupling (i.e. g = {ΔΩ/Ω 0 } / λ) decreases with increasing tortuosity of the conductive pathways formed by the connected LM droplets. A dimensionless parameter for path tortuosity can be used to estimate g for statistically homogeneous LMEE composites. These results rationalize experimental observations and provide insight into the influence of liquid metal droplet assembly on the functionality of the composite. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email