skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Mosaic: leveraging diverse reflector geometries for omnidirectional around-corner automotive radar
A large number of traffic collisions occur as a result of obstructed sight lines, such that even an advanced driver assistance system would be unable to prevent the crash. Recent work has proposed the use of around-the-corner radar systems to detect vehicles, pedestrians, and other road users in these occluded regions. Through comprehensive measurement, we show that these existing techniques cannot sense occluded moving objects in many important real-world scenarios. To solve this problem of limited coverage, we leverage multiple, curved reflectors to provide comprehensive coverage over the most important locations near an intersection. In scenarios where curved reflectors are insufficient, we evaluate the relative benefits of using additional flat planar surfaces. Using these techniques, we more than double the probability of detecting a vehicle near the intersection in three real urban locations, and enable NLoS radar sensing using an entirely new class of reflectors.  more » « less
Award ID(s):
1925767
PAR ID:
10378515
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
MobiSys '22: Proceedings of the 20th Annual International Conference on Mobile Systems, Applications and Services
Page Range / eLocation ID:
155 to 167
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Frontiers in Climate)
    null (Ed.)
    Hurricanes often induce catastrophic flooding due to both storm surge near the coast, and pluvial and fluvial flooding further inland. In an effort to contribute to uncertainty quantification of impending flood events, we propose a probabilistic scenario generation scheme for hurricane flooding using state-of-art hydrological models to forecast both inland and coastal flooding. The hurricane scenario generation scheme incorporates locational uncertainty in hurricane landfall locations. For an impending hurricane, we develop a method to generate multiple scenarios by the predicated landfall location and adjusting corresponding meteorological characteristics such as precipitation. By combining inland and coastal flooding models, we seek to provide a comprehensive understanding of potential flood scenarios for an impending hurricane. To demonstrate the modeling approach, we use real-world data from the Southeast Texas region in our case study. 
    more » « less
  2. ; ; ; ; (, Annals of Glaciology)
    Abstract Visible and infrared satellite images reveal numerous lineations on the Siple Coast region of West Antarctica. We used 5 MHz ice-penetrating radar to probe the interior and the bed of the ice sheet beneath a lineation at the boundary between Engelhardt Ice Ridge and flat-ice terrain to the south of the Kamb Ice Stream (KIS) outlet. Results show curved reflectors that emerge from the bed beneath 600 m thick ice. The tops of the reflectors extend about 100m into the ice above the bed, where they become almost horizontal. Apparent reflectivity of the horizontal section is about 20 dB less than that of the bed. We conclude that the likely cause of such strong reflection is sea water that was accreted into basal crevasses when the flat-ice terrain was floating. Internal layers are warped downward just downslope from the basal reflectors. It is thought that the downwarping was caused by localized basal melting in the past. The spatial pattern of downwarping suggests that localized basal melting was stronger on the north side than on the south side of KIS; apparently ice/ocean interactions on the two sides of KIS were different. 
    more » « less
  3. ; ; (, IEEE International Conference on Communications)
    To accommodate increasingly intensive application bandwidth demands, mmWave WLAN at 60 GHz has been identified as a promising technology with the potential to achieve Gbps throughput. However, mmWave performance is highly dependent on the signal's line-of-sight (LoS) condition due to its high penetration loss when obstructed. We study the use of dedicated flat passive reflectors to improve coverage in indoor mmWave WLANs through a reflector placement scheme that accommodates any general indoor scenario with pre-deployed ceiling-mounted access points (APs). The reflector locations are efficiently selected among all available vertical surfaces within the indoor environment. Through simulations, we show that deployment of intelligently placed reflectors can improve LoS coverage by up to 10%, which is more than deploying one additional AP. Results are provided to illustrate how different factors affect coverage and insights about preferred reflector placements are provided. 
    more » « less
  4. ; (, Proceedings of the ACM on Measurement and Analysis of Computing Systems)
    We propose Argus, a system to enable millimeter-wave (mmWave) deployers to quickly complete site-surveys without sacrificing the accuracy and effectiveness of thorough network deployment surveys. Argus first models the mmWave reflection profile of an environment, considering dominant reflectors, and then use this model to find locations that maximize the usability of the reflectors. The key component in Argus is an efficient machine learning model that can map the visual data to the mmWave signal reflections of an environment and can accurately predict mmWave signal profile at any unobserved locations. It allows Argus to find the best picocell locations to provide maximum coverage and also lets users self-localize accurately anywhere in the environment. Furthermore, Argus allows mmWave picocells to predict device's orientation accurately and enables object tagging and retrieval for VR/AR applications. Currently, we implement and test Argus on two different buildings consisting of multiple different indoor environments. However, the generalization capability of Argus can easily update the model for unseen environments, and thus, Argus can be deployed to any indoor environment with little or no model fine-tuning. 
    more » « less
  5. ; ; ; ; (, Electronics)
    Occupancy sensors are electronic devices used to detect the presence of people in monitored areas, and the output of these sensors can be used to optimize lighting control, heating and ventilation control, and real-estate utilization. Testing methods already exist for certain types of occupancy sensors (e.g., passive infrared) to evaluate their relative performance, allowing manufacturers to report coverage patterns for different types of motion. However, the existing published techniques are mostly tailored for passive-infrared sensors and therefore limited to evaluation of large motions, such as walking and hand movement. Here we define a characterization technique for a Doppler radar occupancy sensor based on detecting a small motion representing human breathing, using a well-defined readily reproducible target. The presented technique specifically provides a robust testing method for a single-channel continuous wave Doppler-radar based occupancy sensor, which has variation in sensitivity within each wavelength of range. By comparison with test data taken from a human subject, we demonstrate that the mobile target provides a reproducible alternative for a human target that better accounts for the impact of sensor placement. This characterization technique enables generation of coverage patterns for breathing motion for single-channel continuous wave Doppler radar-based occupancy sensors. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email