An official website of the United States government
Abstract A versatile synthetic platform is reported that affords high molecular weight graft copolymers containing polydimethylsiloxane (PDMS) backbones and vinyl‐based polymer side chains with excellent control over molecular weight and grafting density. The synthetic approach leverages thiol‐ene click chemistry to attach an atom‐transfer radical polymerization (ATRP) initiator to a variety of commercially available poly(dimethylsiloxane‐co‐methylvinylsiloxane) backbones (PDMS‐co‐PVMS), followed by controlled radical polymerization with a wide scope of vinyl monomers. Selective degradation of the siloxane backbone with tetrabutylammonium fluoride confirmed the controlled nature of side‐chain growth via ATRP, yielding targeted side‐chain lengths for copolymers containing up to 50% grafting density and overall molecular weights in excess of 1 MDa. In addition, by using a mixture of thiols, grafting density and functionality can be further controlled by tuning initiator loading along the backbone. For example, solid‐state fluorescence of the graft copolymers was achieved by incorporating a thiol‐containing fluorophore along the siloxane backbone during the thiol‐ene click reaction. This simple synthetic platform provides facile control over the properties of a wide variety of grafted copolymers containing flexible PDMS backbones and vinyl polymer side chains.
more »
« less
Trials and adventures of the synthesis and evaluation of amphiphilic graft copolymers with dynamic topology
Abstract Amphiphilic graft copolymers were prepared via a grafting through approach to yield materials with a hydrophilic backbone and hydrophobic arms. The thermally responsive macromonomers were designed to contain a Diels–Alder adduct such that cyclo‐reversion would cleave the arms from the backbone thus altering polymer topology, composition and solubility. The macromonomers were prepared via light‐inducted atom transfer radical polymerization followed by post‐polymerization modification to install a polymerizable functionality. Next, free radical polymerization was employed to yield thermally responsive amphiphilic graft copolymers, whose solution state characteristics were extensively characterized by UV/Vis spectroscopy and fluorimetry. Due to the amphiphilic nature of the graft copolymer, some unexpected results occurred because of aggregation and solubility limitations. Furthermore, it was discovered that poly(N‐isopropyl acrylamide) exhibited distinct and unique aggregation properties by itself.
more »
« less
- Award ID(s):
- 1709640
- PAR ID:
- 10380266
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 60
- Issue:
- 22
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- p. 3117-3127
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The random copolymerization of norbornene‐functionalized macromonomers was explored as a method of synthesizing mixed‐graft block copolymers (mGBCPs). The copolymerization kinetics of a model system of polystyrene (PS) and poly(lactic acid) (PLA) macromonomers was first analyzed, revealing a gradient composition of side chains along the mGBCP backbone. The phase separation behavior of mGBCPs with PS and PLA side chains of various backbone lengths and side chain molar ratios was investigated, and increasing the backbone length was found to stabilize the phase‐separated nanostructures. The graft architecture was also demonstrated to improve the processability of the mGBCP, compared to a linear counterpart. Investigations of mGBCPs comprised of polydimethylsiloxane and poly(ethylene oxide) side chains exemplified the diverse self‐assembled morphologies, including a Frank‐Kasper A15 phase, that can be obtained with mGBCPs synthesized by random copolymerization of macromonomers. Lastly, a ternary mGBCP was synthesized by the copolymerization of three macromonomers.more » « less
-
Abstract Cationic bottlebrush homopolymers are polymerized using a grafting‐through approach by ring‐opening metathesis polymerization (ROMP) to afford well‐defined polymers. Quaternary ammonium macromonomers (MMs) are prepared by quaternizing tertiary amine MMs synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization. The quaternary ammonium MMs undergo ROMP to target molecular weights (Mn= 30 000–100 000 g mol−1) and a low dispersity (Đ= 1.10–1.30). Halide‐ligand exchange between the third generation Grubbs catalyst (G3) and halide counter ions (bromide and iodide ions) of MMs changes the catalyst activity throughout ROMP, causing it to deviate from pseudo‐first order kinetic behavior; however, the polymerization still follows controlled behavior without significant catalyst termination. Increasing steric bulk of the MMs decreases the polymerization rate as well. Amphiphilic block copolymers are synthesized by sequential polymerization of quaternary ammonium MMs and polystyrene (PS) MMs. Using a PS macroinitiator affords block copolymers with lowerĐvalues as compared to the less active cationic macroinitiator.more » « less
-
Polyether based side-chain liquid crystalline (SCLC) copolymers with distinct microstructures were prepared using living anionic polymerization techniques. The composition, end groups, purity, and sequence of the resulting copolymers were elucidated by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) and tandem mass spectrometry (MS/MS). MALDI-MS analysis confirmed the presence of (CH3)3CO– and –H end groups at the initiating (α) and terminating (ω) chain end, respectively, and allowed determination of the molecular weight distribution and comonomer content of the copolymers. The comonomer positions along the polymer chain were identified by MS/MS, from the fragments formed via C–O and C–C bond cleavages in the polyether backbone. Random and block architectures could readily be distinguished by the contiguous fragment series formed in these reactions. Notably, backbone C–C bond scission was promoted by a radical formed via initial C–O bond cleavage in the mesogenic side chain. This result documents the ability of a properly substituted side chain to induce sequence indicative bond cleavages in the polyether backbone.more » « less
-
We synthesized bottlebrush polymers with polyaziridine brushes and a polynorbornene backbone by a grafting-through approach. Polyaziridine macromonomers were synthesized by aza-anoinic polymerization of an N -tosylaziridine, initiated with a norbornene-functionalized sulfonamide anion. These macromonomers were then polymerized by ring-opening metathesis polymerization (ROMP) in dichloromethane to produce bottlebrush polymers with molecular weights of 136–456 kDa. To investigate potential macromonomer aggregation that would hinder grafting-through polymerization, we used dynamic light scattering (DLS) to measure the change in macromonomer aggregation and the growth of bottlebrush chains during ROMP. We observed that the macromonomers aggregate in solution, but once ROMP is initiated, these aggregates disperse over the course of the polymerization. This solution behavior appears to be an example of polymerization-induced deaggregation.more » « less
