An official website of the United States government
Abstract Reconfigurable arrays of 2D nanomaterials are essential for the realization of switchable and intelligent material systems. Using liquid crystals (LCs) as a medium represents a promising approach, in principle, to enable such control. In practice, however, this approach is hampered by the difficulty of achieving stable dispersions of nanomaterials. Here, we report on good dispersions of pristine CdSe nanoplatelets (NPLs) in LCs, and reversible, rapid control of their alignment and associated anisotropic photoluminescence, using a magnetic field. We reveal that dispersion stability is greatly enhanced using polymeric, rather than small molecule, LCs and is considerably greater in the smectic phases of the resulting systems relative to the nematic phases. Aligned composites exhibit highly polarized emission that is readily manipulated by field-realignment. Such dynamic alignment of optically-active 2D nanomaterials may enable the development of programmable materials for photonic applications and the methodology can guide designs for anisotropic nanomaterial composites for a broad set of related nanomaterials.
more »
« less
4D Printing of Seed Capsule‐Inspired Hygro‐Responsive Structures via Liquid Crystal Templating‐Assisted Vat Photopolymerization
Abstract The creatures in nature exhibit dynamic responses to environmental stimuli through their hierarchical architectures. Benefiting from gradient porous structures,Delosperma nakurenseopens its protective valves of the seed capsules when hydrated with liquid water, increasing the likelihood that seeds are dispersed under conditions favorable to germination. Here, a versatile 4D printing technology, namely liquid crystal templating‐assisted vat photopolymerization (LCT‐VPP), which can fabricate bioinspired porous structures with hygro‐responsive capabilities by utilizing photopolymerization induced phase separation (PIPS) and liquid crystals (LCs) electro‐alignment is reported. PIPS within the LCs/nanofiller composites leads to the formation of submicrometer gradient porous structures after extracting nonreactive LCs. The electric field enables the programmable alignment of LCs, which in turn elongates the porous structures and aligns nanofillers. In addition, the programmable arranged nanofillers by the templated LCs enhance the degree of deformation and thus the resulting composites exhibit high shape control accuracy, fast dynamic response, and high reliability. This study opens a perspective for designing bioinspired smart materials with the special spatial distribution of porous structures. The results reported here can give rise to various potential applications in soft robots, smart anticounterfeiting devices, flexible sensors, and ultrafiltration membrane.
more »
« less
- Award ID(s):
- 2114119
- PAR ID:
- 10381806
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 33
- Issue:
- 5
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Di_Bartolomeo, Antonio (Ed.)Abstract Recently, doping guest materials such as quantum dots (QDs) into liquid crystals (LCs) has been of great interest since their addition substantially enhances the properties of LC and opens new avenues for scientific advancement. Here, we report the induction of homeotropic alignment in cells without alignment layers of the negative dielectric nematic liquid crystal, N-(4-Methoxybenzylidene)-4-butylaniline (MBBA) by doping with carbon dots (CDs ∼2.8 ± 0.72 nm). The CDs-MBBA composites (CDs concentration: 0.002, 0.01, 0.03, 0.1 and 0.3 wt%) were investigated using optical polarising microscopy, electro-optical and dielectric techniques. Polarizing optical micrographs and voltage dependent optical transmission revealed the induced homeotropic alignment for all the composites under investigation. Interestingly, the least concentrated sample, 0.002 wt% exhibited partial homeotropic alignment. However, due to light leakage, the optical transmission value below threshold voltage was relatively higher than the rest of the composites. MBBA is a negative dielectric material, hence the application of a voltage across the cell was able to switch the alignment from a dark to a bright state for all composites. However, above a certain voltage (>threshold voltage), the bright state produced some instabilities. The value of dielectric permittivity was observed to decrease with increasing concentration, confirming the effect of CDs in producing homeotropic alignment in MBBA. Measurements as a function of temperature were conducted to examine the thermal stability of the induced alignment. The alignment was found to be stable throughout the nematic phase of MBBA. The induction of such alignment without conventional alignment (i.e., rubbing of polyimides) technique can be helpful in addressing the evolving display demands by making liquid crystal displays (LCDs) and other display devices cost effective.more » « less
-
Abstract Polyvinylidene fluoride (PVDF) is a semicrystalline polymer used in thin‐film dielectric capacitors because of its inherently high dielectric constant and low loss tangent. Its dielectric constant can be increased by the formation and alignment of its β‐phase crystalline structure, which can be facilitated by 2D nanofillers. 2D carbides and nitrides, MXenes, are promising candidates due to their notable dielectric permittivity and ability to increase interfacial polarization. Still, their mixing is challenging due to weak interfacial interactions and poor dispersibility of MXenes in PVDF. This work explores a novel method for delaminating Ti3C2TxMXene directly into organic solvents while maintaining flake size and quality, as well as the use of a non‐solvent‐induced phase separation method for producing both dense and porous PVDF‐MXene composite films. A deeper understanding of dielectric behavior in these composites is reached by examining MXenes with both mixed and pure chlorine terminations in PVDF matrices. Thin‐film capacitors fabricated from these composites display ultrahigh discharge energy density, exceeding 45 J cm−3with 95% efficiency. The PVDF‐MXene composites are also processed using a green and sustainable solvent, propylene carbonate.more » « less
-
Abstract The development of stimuli‐responsive materials suitable for use in wearable sensors is a key unresolved challenge. Liquid crystals (LCs) are particularly promising, as they do not require power, are light‐weight, and can be tuned to respond to a range of targeted chemical stimuli. Here, an advance is reported in the design of LCs for chemical sensors with the discovery of LCs that assume parallel orientations at free surfaces and yet retain their chemoresponsiveness. The resulting LC‐based sensors are more sensitive and exhibit faster responses than previous LC sensor designs.more » « less
-
Tissue regeneration requires 3-dimensional (3D) smart materials as scaffolds to promote transport of nutrients. To mimic mechanical properties of extracellular matrices, biocompatible polymers have been widely studied and a diverse range of 3D scaffolds have been produced. We propose the use of responsive polymeric materials to create dynamic substrates for cell culture, which goes beyond designing only a physical static 3D scaffold. Here, we demonstrated that lactone- and lactide-based star block-copolymers (SBCs), where a liquid crystal (LC) moiety has been attached as a side-group, can be crosslinked to obtain Liquid Crystal Elastomers (LCEs) with a porous architecture using a salt-leaching method to promote cell infiltration. The obtained SmA LCE-based fully interconnected-porous foams exhibit a Young modulus of 0.23 ± 0.07 MPa and a biodegradability rate of around 20% after 15 weeks both of which are optimized to mimic native environments. We present cell culture results showing growth and proliferation of neurons on the scaffold after four weeks. This research provides a new platform to analyse LCE scaffold–cell interactions where the presence of liquid crystal moieties promotes cell alignment paving the way for a stimulated brain-like tissue.more » « less
