An official website of the United States government
ABSTRACT Successful rearing of fish in hatcheries is critical for conservation, recreational fishing, commercial fishing through wild stock enhancements, and aquaculture production. Flowthrough (FT) hatcheries require more water than recirculating aquaculture systems (RAS), which enable up to 99% of their water to be recycled, thus significantly reducing environmental impacts. Here, we evaluated the biological and physical microbiome interactions of three Atlantic salmon hatcheries (RAS n = 2, FT n = 1). Gill, skin, and digesta from six juvenile fish along with tank biofilms and water were sampled from tanks in each of the hatcheries (60 fish across 10 tanks) to assess the built environment and mucosal microbiota using 16S rRNA gene sequencing. The water and tank biofilm had more microbial richness than fish mucus, while skin and digesta from RAS fish had 2 times the richness of FT fish. Body sites each had unique microbiomes ( P < 0.001) and were influenced by hatchery system type ( P < 0.001), with RAS being more similar. A strong association between the tank and fish microbiome was observed. Water and tank biofilm richness was positively correlated with skin and digesta richness. Strikingly, the gill, skin, and digesta communities were more similar to that in the origin tank biofilm than those in all other experimental tanks, suggesting that the tank biofilm has a direct influence on fish-associated microbial communities. Lastly, microbial diversity and mucous cell density were positively associated with fish growth and length. The results from this study provide evidence for a link between the tank microbiome and the fish microbiome, with the skin microbiome as an important intermediate. IMPORTANCE Atlantic salmon, Salmo salar , is the most farmed marine fish worldwide, with an annual production of 2,248 million metric tons in 2016. Salmon hatcheries are increasingly changing from flowthrough toward recirculating aquaculture system (RAS) design to accommodate more control over production along with improved environmental sustainability due to lower impacts on water consumption. To date, microbiome studies of hatcheries have focused either on the fish mucosal microbiota or on the built environment microbiota but have not combined the two to understand their interactions. Our study evaluates how the water and tank biofilm microbiota influences the fish microbiota across three mucosal environments (gill, skin, and digesta). Results from this study highlight how the built environment is a unique source of microbes to colonize fish mucus and, furthermore, how this can influence fish health. Further studies can use this knowledge to engineer built environments to modulate fish microbiota for beneficial phenotypes.
more »
« less
Microbial biofilms for electricity generation from water evaporation and power to wearables
Abstract Employing renewable materials for fabricating clean energy harvesting devices can further improve sustainability. Microorganisms can be mass produced with renewable feedstocks. Here, we demonstrate that it is possible to engineer microbial biofilms as a cohesive, flexible material for long-term continuous electricity production from evaporating water. Single biofilm sheet (~40 µm thick) serving as the functional component in an electronic device continuously produces power density (~1 μW/cm 2 ) higher than that achieved with thicker engineered materials. The energy output is comparable to that achieved with similar sized biofilms catalyzing current production in microbial fuel cells, without the need for an organic feedstock or maintaining cell viability. The biofilm can be sandwiched between a pair of mesh electrodes for scalable device integration and current production. The devices maintain the energy production in ionic solutions and can be used as skin-patch devices to harvest electricity from sweat and moisture on skin to continuously power wearable devices. Biofilms made from different microbial species show generic current production from water evaporation. These results suggest that we can harness the ubiquity of biofilms in nature as additional sources of biomaterial for evaporation-based electricity generation in diverse aqueous environments.
more »
« less
- PAR ID:
- 10383231
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Air humidity is a vast, sustainable reservoir of energy that, unlike solar and wind, is continuously available. However, previously described technologies for harvesting energy from air humidity are either not continuous or require unique material synthesis or processing, which has stymied scalability and broad deployment. Here, a generic effect for continuous energy harvesting from air humidity is reported, which can be applied to a broad range of inorganic, organic, and biological materials. The common feature of these materials is that they are engineered with appropriate nanopores to allow air water to pass through and undergo dynamic adsorption–desorption exchange at the porous interface, resulting in surface charging. The top exposed interface experiences this dynamic interaction more than the bottom sealed interface in a thin‐film device structure, yielding a spontaneous and sustained charging gradient for continuous electric output. Analyses of material properties and electric outputs lead to a “leaky capacitor” model that can describe how electricity is harvested and predict current behaviors consistent with experiments. Predictions from the model guide the fabrication of devices made from heterogeneous junctions of different materials to further expand the device category. The work opens a wide door for the broad exploration of sustainable electricity from air.more » « less
-
Recent efforts towards energy scavenging with eco-friendly methods and abundant water look very promising for powering wearables and distributed electronics. However, the time duration of electricity generation is typically too short, and the current level is not sufficient to meet the required threshold for the proper operation of electronics despite the relatively large voltage. This work newly introduced an electrochemical method in combination with hydro-effects in order to extend the energy scavenging time and boost the current. Our device consists of corroded porous steel electrodes whose corrosion overpotential was lowered when the water concentration was increased and vice versa . Then a potential difference was created between two electrodes, generating electricity via the hydro-electrochemical method up to an open-circuit voltage of 750 mV and a short-circuit current of 90 μA cm −2 . Furthermore, electricity was continuously generated for more than 1500 minutes by slow water diffusion against gravity from the bottom electrode. Lastly, we demonstrated that our hydro-electrochemical power generators successfully operated electronics, showing the feasibility of offering electrical power for sufficiently long time periods in practice.more » « less
-
Abstract Microbial biofilms are ubiquitous. In marine and freshwater ecosystems, microbe–mineral interactions sustain biogeochemical cycles, while biofilms found on plants and animals can range from pathogens to commensals. Moreover, biofouling and biocorrosion represent significant challenges to industry. Bioprocessing is an opportunity to take advantage of biofilms and harness their utility as a chassis for biocommodity production. Electrochemical bioreactors have numerous potential applications, including wastewater treatment and commodity production. The literature examining these applications has demonstrated that the cell–surface interface is vital to facilitating these processes. Therefore, it is necessary to understand the state of knowledge regarding biofilms’ role in bioprocessing. This mini-review discusses bacterial biofilm formation, cell–surface redox interactions, and the role of microbial electron transfer in bioprocesses. It also highlights some current goals and challenges with respect to microbe-mediated bioprocessing and future perspectives.more » « less
-
null (Ed.)—Ocean wave energy is a renewable energy which remains costly for large-scale electricity generation. Although the oscillating water column (OWC) wave energy converter (WEC) is a promising device type with a rectifying air turbine and generator which convert alternating airflow induced by the water motion into kinetic energy then to electric energy, there are still several challenges to overcome to achieve commercial energy production. A first step is deploying multiple devices close to each other in WEC parks, to save cost associated with mooring lines and power transmission cables and a second step is applying control at each stage of energy conversion to increase the electric energy output of the devices and ensure a safe operation. Herein, we first present a state-space model of a park of seven hydrodynamically interacting floating OWC WECs in all degrees of freedom with nonlinear PTO dynamics and a shared, quasi-static mooring model. The electric power flow is modeled by considering the conversion losses from the AC generators over a DC link, including a storage unit to the grid connection. Secondly, the OWC WEC park is expressed from a higher hierarchical level as an automaton driven by discrete events. Finally, we use a standard supervisory control approach to enable different local control schemes to ensure a save operation of the individual WEC and the park. The supervisor has good adaptability potential for different WECs and the incorporation of safety mechanisms.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41467-022-32105-6
