An official website of the United States government
Abstract Macroscale additive manufacturing has seen significant advances recently, but these advances are not yet realized for the bottom-up formation of nanoscale polymeric features. We describe a platform technology for creating crosslinked polymer features using rapid surface-initiated crosslinking and versatile macrocrosslinkers, delivered by a microfluidic-coupled atomic force microscope known as FluidFM. A crosslinkable polymer containing norbornene moieties is delivered to a catalyzed substrate where polymerization occurs, resulting in extremely rapid chemical curing of the delivered material. Due to the living crosslinking reaction, construction of lines and patterns with multiple layers is possible, showing quantitative material addition from each deposition in a method analogous to fused filament fabrication, but at the nanoscale. Print parameters influenced printed line dimensions, with the smallest lines being 450 nm across with a vertical layer resolution of 2 nm. This nanoscale 3D printing platform of reactive polymer materials has applications for device fabrication, optical systems and biotechnology.
more »
« less
Photopolymerized Features via Beam Pen Lithography as a Novel Tool for the Generation of Large Area Protein Micropatterns
Abstract A cantilever‐free scanning probe lithography (CF‐SPL)‐based method for the rapid polymerization of nanoscale features on a surface via crosslinking and thiol‐acrylate photoreactions is described, wherein the nanoscale position, height, and diameter of each feature can be finely and independently tuned. With precise spatiotemporal control over the illumination pattern, beam pen lithography (BPL) allows for the photo‐crosslinking of polymers into ultrahigh resolution features over centimeter‐scale areas using massively parallel >160 000 pen arrays of individually addressable pens that guide and focus light onto the surface with sub‐diffraction resolution. The photoinduced crosslinking reaction of the ink material, which is composed of photoinitiator, diphenyl(2,4,6‐trimethylbenzoyl) phosphine oxide, poly(ethylene glycol) diacrylate, and thiol‐modified functional binding molecules (i.e., thiol‐PEG‐biotin or 16‐mercaptohexanoic acid), proceeds to ≈80% conversion with UV exposure (72 mW cm−2) for short time periods (0.5 s). Such polymer patterns are further reacted with proteins (streptavidin and fibronectin) to yield protein arrays with feature arrangements at high resolution and densities controlled by local UV exposure. This platform, which combines polymer photochemistry and massive arrays of scanning probes, constitutes a new approach to making biomolecular microarrays in a high‐throughput and high‐yielding manner, opening new routes for biochip synthesis, bioscreening, and cell biology research.
more »
« less
- Award ID(s):
- 2032180
- PAR ID:
- 10383534
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small
- Volume:
- 18
- Issue:
- 13
- ISSN:
- 1613-6810
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The widespread utilization of metamaterials, despite their immense transformative potential, faces challenges regarding scalability in mass production. To address these limitations, an additive method that leverages liquid inks and selective wetting to produce scalable and cost‐effective metamaterials is presented. UV‐based imprinting lithography is utilized to fabricate surface energy‐modulated patterns, enabling precise solution patterning. This approach, unlike conventional UV‐based imprinting lithography, not only accurately produces the negative replica of the stamp topography during UV‐induced crosslinking but also transfers a hydrophobic layer onto the raised surfaces of the imprinted hydrophilic layer, resulting in 3D shapes with spatially modulated surface energy. In the second process step, a functional ink is dragged over the patterned substrate where it dewets to fill the hydrophilic recesses. This innovative process enables high‐speed metamaterial production, with ink deposition speeds up to 12 m min−1. The method accommodates a wide range of inks, including metals, dielectrics, and semiconductors, providing meticulous control over vertical structures such as pattern thickness and hetero‐multilayer formation. Additionally, it offers flexibility in creating metamaterials on free‐standing ultra‐thin sheets, introducing desirable attributes like foldability and disposability. The effectiveness of this approach is validated through the fabrication and characterization of metallic metamaterials.more » « less
-
Abstract A photocrosslinkable poly(N,N′‐diethylacrylamide) copolymer allows for the photolithographic fabrication of hydrogel sheets with nonuniform crosslinking density and swelling ratio. Using this material system, different 3D shapes with nonzero Gaussian curvatureKare successfully programmed by prescribing a “metric” defined by in‐plane variations in swelling. However, this methodology does not control the direction of buckling adopted by each positive K feature, and therefore cannot controllably select between different isometric shapes defined by a single metric. Here, by introducing gradients in swelling through the thickness of the gel sheet by tuning the absorption of the UV‐light used for crosslinking, a preferential buckling direction is locally specified for each feature by the direction of UV exposure. By also controlling the strength of coupling between neighboring features, this is shown to be an effective method to program buckling direction of each unit within a canonical corrugated surface shape.more » « less
-
Photo-induced thiol-ene crosslinking of allyl-functionalized cellulose nanocrystal (CNC)/polymer nanocomposites allows access to films that mimic the water-enhanced mechanical gradient characteristics of the squid beak. These films are prepared by mixing the functionalized CNCs and polymer in a solvent before solution casting and drying. The photocrosslinking agents are then imbibed into the film before UV exposure. Reported herein are studies aimed at better understanding the effect of the film preparation procedure, film thickness and the conditions under which the UV treatment is carried out. It was found that when the film is heated at a temperature higher than its glass transition temperature (Tg) during the UV irradiation step there is a greater enhancement in the mechanical properties of the films, presumably on account of more efficient crosslinking between the CNC fillers. Moreover, composite films that were compression molded (at 90°C) before the imbibing step displayed lower mechanical properties compared to the as-cast films, which is attributed to phase separation of the CNC fillers and polymer matrix during this additional processing step. Finally, the film thickness was also found to be a critical factor that affects the degree of crosslinking. For example, thinner films (50 µm) displayed a higher wet modulus ca. 130 MPa compared to ca. 80 MPa for the thicker films (150 µm). Understanding the processing conditions allows access to a larger range of mechanical properties which is important for the design of new bio-inspired mechanical gradient nanocomposites.more » « less
-
Abstract Diarylethene‐functionalized liquid‐crystalline elastomers (DAE‐LCEs) containing thiol‐anhydride bonds were prepared and shown to undergo reversible, reprogrammable photoinduced actuation. Upon exposure to UV light, a monodomain DAE‐LCE generated 5.5 % strain. This photogenerated strain was demonstrated to be optically reversible over five cycles of alternating UV/Visible light exposure with minimal photochrome fatigue. The incorporation of thiol‐anhydride dynamic bonds allowed for retention of actuated states. Further, re‐programming of the nematic director was achieved by heating above the temperature for bond exchange to occur (70 °C) yet below the nematic‐to‐isotropic transition temperature (100 °C) such that order was maintained between mesogens. The observed thermal stability of each of the diarylethene isomers of over 72 h allowed for decoupling of photo‐induced processes and polymer network effects, showing that both polymer relaxation and back‐isomerization of the diarylethene contributed to LCE relaxation over a period of 12 hours after actuation unless bond exchange occurred.more » « less
