An official website of the United States government
The coupling between ferroelectric and magnetic order provides a powerful means to control magnetic properties with electric fields. In this study, we have investigated the magnetoelectric (ME) coupling in iridate-oxide based superlattices employing first-principles density functional theory (DFT) calculations. In particular, we have investigated several oxide superlattices, including (SrIrO 3 ) 1 –(CaTiO 3 ) 1 (SIO–CTO) and (SrIrO 3 ) 1 –(BaTiO 3 ) 1 (SIO–BTO), with an alternating single layer of SIO and CTO/BTO. We identify a very large ME coupling in SIO–BTO mediated by both lattice and electronic contributions. In comparison, moderate ME coupling constants are found in SIO–CTO. Further electronic and structural analyses reveal that the large ME coupling of SIO–BTO is caused by the large spin–orbit coupling of 5d iridium as well as the significant polarization induced in the SIO–BTO. Interestingly, we find that the ME coupling in SIO–BTO can further be enhanced by modulating epitaxial strain. These results suggest a route to significantly enhance the ME coupling effects, which might be applicable for other materials and practical applications.
more »
« less
Magnetism and microstructure of co-deposited yttrium iron garnet-barium titanate films
Yttrium iron garnet (YIG) and barium titanate (BTO) were co-deposited on (001)-orientated gadolinium gallium garnet substrates by pulsed laser deposition with composition determined by the ratio of laser shots ablating each target. With increasing shot ratios of YIG/BTO = 2.5/1, 4/1, 20/1, and 30/1, the majority phase in the film changes from textured polycrystalline perovskite to epitaxial garnet. Cross-sectional STEM characterization of the YIG-rich films reveals three distinct sublayers: the bottom layer is a coherent epitaxial garnet layer with higher unit cell volume than that of YIG; the second layer is garnet exhibiting crystalline defects and misorientation; and the upper layer is amorphous. Highly defective regions within the second layer are richer in Ba, suggesting that the microstructure is promoted by the insolubility of Ba in YIG. Temperature-dependent magnetization measurements fitted to a super-exchange dilution model indicate the presence of nonmagnetic Ti and vacancies in both octahedral and tetrahedral sites.
more »
« less
- Award ID(s):
- 1911792
- PAR ID:
- 10384432
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 121
- Issue:
- 23
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Yttrium iron garnet (YIG) magnonics has garnered significant research interest because of the unique properties of magnons (quasiparticles of collective spin excitation) for signal processing. In particular, hybrid systems based on YIG magnonics show great promise for quantum information science due to their broad frequency tunability and strong compatibility with other platforms. However, their broad applications have been severely constrained by substantial microwave loss in the gadolinium gallium garnet (GGG) substrate at cryogenic temperatures. In this study, we demonstrate that YIG thin films can be spalled from YIG/GGG samples. Our approach is validated by measuring hybrid devices comprising superconducting resonators and spalled YIG films, which exhibit anti-crossing features that indicate strong coupling between magnons and microwave photons. Such new capability of separating YIG thin films from GGG substrates via spalling and the integrated superconductor-YIG devices represent a significant advancement for integrated magnonic devices, paving the way for advanced magnon-based coherent information processing.more » « less
-
Abstract Magnetic heterostructures consisting of single‐crystal yttrium iron garnet (YIG) films coated with platinum are widely used in spin‐wave experiments related to spintronic phenomena such as the spin‐transfer‐torque, spin‐Hall, and spin‐Seebeck effects. However, spin waves in YIG/Pt bilayers experience much stronger attenuation than in bare YIG films. For micrometer‐thick YIG films, this effect is caused by microwave eddy currents in the Pt layer. This paper reports that by employing an excitation configuration in which the YIG film faces the metal plate of the microstrip antenna structure, the eddy currents in Pt are shunted and the transmission of the Damon–Eschbach surface spin wave is greatly improved. The reduction in spin‐wave attenuation persists even when the Pt coating is separated from the ground plate by a thin dielectric layer. This makes the proposed excitation configuration suitable for injection of an electric current into the Pt layer and thus for application in spintronics devices. The theoretical analysis carried out within the framework of the electrodynamic approach reveals how the platinum nanolayer and the nearby highly conductive metal plate affect the group velocity and the lifetime of the Damon–Eshbach surface wave and how these two wavelength‐dependent quantities determine the transmission characteristics of the spin‐wave device.more » « less
-
Abstract Ferrimagnetic iron garnets enable magnetic and magneto‐optical functionality in silicon photonics and electronics. However, garnets require high‐temperature processing for crystallization which can degrade other devices on the wafer. Here bismuth‐substituted yttrium and terbium iron garnet (Bi‐YIG and Bi‐TbIG) films are demonstrated with good magneto‐optical performance and perpendicular magnetic anisotropy (PMA) crystallized by a microheater built on a Si chip or by rapid thermal annealing. The Bi‐TbIG film crystallizes on Si at 873 K without a seed layer and exhibits good magneto‐optical properties with Faraday rotation (FR) of −1700 deg cm−1. The Bi‐YIG film also crystallizes on Si and fused SiO2at 873 K without a seed layer. Rapidly cooled films exhibit PMA due to the tensile stress caused by the thermal expansion mismatch with the substrates, increasing the magnetoelastic anisotropy by 4 kJ m−3versus slow‐cooled films. Annealing in the air for 15 s using the microheater yields fully crystallized Bi‐TbIG on the Si chip.more » « less
-
Acoustically driven ferromagnetic resonance (ADFMR) is a platform that enables efficient generation and detection of spin waves via magnetoelastic coupling with surface acoustic waves (SAWs). While previous studies successfully achieved ADFMR in ferromagnetic metals, there are only few reports on ADFMR in magnetic insulators such as yttrium iron garnet (Y3Fe5O12, YIG) despite more favorable spin wave properties, including low damping and long coherence length. The growth of high-quality YIG films for ADFMR devices is a major challenge due to poor lattice-matching and thermal degradation of the piezoelectric substrates during film crystallization. In this work, we demonstrate ADFMR of YIG thin films on LiNbO3 (LNO) substrates. We employed a SiOx buffer layer and rapid thermal annealing for crystallization of YIG films with minimal thermal degradation of LNO substrates. Optimized ADFMR device designs and time-gating measurements were used to enhance the ADFMR signal and overcome the intrinsically low magnetoelastic coupling of YIG. YIG films have a polycrystalline structure with an in-plane easy direction due to biaxial stresses induced during cooling after crystallization. The YIG device shows clear ADFMR patterns with maximum absorption for H ≈ 160 mT parallel to SAW propagation, which is consistent with our simulation results based on existing theoretical models. These results expand possibilities for developing efficient spin wave devices with magnetic insulators.more » « less
