Abstract Three-dimensional bioprinting is a promising field in regenerating patient-specific tissues and organs due to its inherent capability of releasing biocompatible materials encapsulating living cells in a predefined location. Due to the diverse characteristics of tissues and organs in terms of microstructures and cell types, a multinozzle extrusion-based 3D bioprinting system has gained popularity. The investigations on interactions between various biomaterials and cell-to-material can provide relevant information about the scaffold geometry, cell viability, and proliferation. Natural hydrogels are frequently used in bioprinting materials because of their high-water content and biocompatibility. However, the dominancy of liquid characteristics of only-hydrogel materials makes the printing process challenging. Polycaprolactone (PCL) is the most frequently used synthetic biopolymer. It can provide mechanical integrity to achieve dimensionally accurate fabricated scaffolds, especially for hard tissues such as bone and cartilage scaffolds. In this paper, we explored various multimaterial bioprinting strategies with our recently proposed bio-inks and PCL intending to achieve dimensional accuracy and mechanical aspects. Various strategies were followed to coprint natural and synthetic biopolymers and interactions were analyzed between them. Printability of pure PCL with various molecular weights was optimized with respect to different process parameters such as nozzle temperature, printing pressure, printing speed, porosity, and bed temperature to coprint with natural hydrogels. The relationship between the rheological properties and shape fidelity of natural polymers was investigated with a set of printing strategies during coprinting with PCL. The successful application of this research can help achieve dimensionally accurate scaffolds.
more »
« less
An Effort to Fabricate Clinically Relevant Scaffold Using 3D Bioprinting Processes
Three-dimensional bio-printing is a rapidly growing field attempting to recreate functional tissues for medical and pharmaceutical purposes. Development of functional tissues and organs requires the ability to achieve large full-scale scaffolds that mimic human organs. It is difficult to achieve large scaffolds that can support themselves without damaging printed cells in the process. The high viscosity needed to support large prints requires high amounts of pressure that diminishes cell viability and proliferation. By working with the rheological, mechanical, and microstructural properties of different compositions, a set of biomaterial compositions was identified to have high structural integrity and shape fidelity without needing a harmful amount of pressure to extrude. Various large scale-scaffolds were fabricated (up to 3.0 cm, 74 layers) using those hybrid hydrogels ensuring geometric fidelity. This effort can ensure to fabricate large scaffolds using 3D bio-printing processes ensuring proper internal and external geometries.
more »
« less
- Award ID(s):
- 1757371
- NSF-PAR ID:
- 10385294
- Editor(s):
- Ellis, K; Ferrell, W; Knapp, J.
- Date Published:
- Journal Name:
- Proceedings for IISE Annual Conference & Expo 2022
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Maintaining shape fidelity of 3D bio-printed scaffolds with soft biomaterials is an ongoing challenge. Here, a rheological investigation focusing on identifying useful physical and mechanical properties directly related to the geometric fidelity of 3D bio-printed scaffolds is presented. To ensure during- and post-printing shape fidelity of the scaffolds, various percentages of Carboxymethyl Cellulose (CMC) (viscosity enhancer) and different calcium salts (CaCl2 and CaSO4, physical cross-linkers) were mixed into alginate before extrusion to realize shape fidelity. The overall solid content of Alginate-Carboxymethyl Cellulose (CMC) was limited to 6%. A set of rheological tests, e.g., flow curves, amplitude tests, and three interval thixotropic tests, were performed to identify and compare the shear-thinning capacity, gelation points, and recovery rate of various compositions. The geometrical fidelity of the fabricated scaffolds was defined by printability and collapse tests. The effect of using multiple cross-linkers simultaneously was assessed. Various large-scale scaffolds were fabricated (up to 5.0 cm) using a pre-crosslinked hybrid. Scaffolds were assessed for the ability to support the growth of Escherichia coli using the Most Probable Number technique to quantify bacteria immediately after inoculation and 24 h later. This pre-crosslinking-based rheological property controlling technique can open a new avenue for 3D bio-fabrication of scaffolds, ensuring proper geometry.more » « less
-
more » « less
Abstract Due to its inbuilt ability to release biocompatible materials encapsulating living cells in a predefined location, 3D bioprinting is a promising technique for regenerating patient-specific tissues and organs. Among various 3D bioprinting techniques, extrusion-based 3D bio-printing ensures a higher percentage of cell release, ensuring suitable external and internal scaffold architectures. Scaffold architecture is mainly defined by filament geometry and width. A systematic selection of a set of process parameters, such as nozzle diameter, print speed, print distance, extrusion pressure, and material viscosity, can control the filament geometry and width, eventually confirming the user-defined scaffold porosity. For example, carefully selecting two sets of process parameters can result in a similar filament width. However, the lack of availability of sufficient analytical relations between printing process parameters and filament width creates a barrier to achieving defined scaffold architectures with available resources. In this paper, filament width was determined using an image processing technique and an analytical relationship was developed, including various process parameters to maintain defined filament width variation for different hydrogels within an acceptable range to confirm the overall geometric fidelity of the scaffold. Proposed analytical relations can help achieve defined scaffold architectures with available resources.
-
null (Ed.)more » « less
Abstract Three-dimensional bioprinting is a rapidly growing field attempting to recreate functional tissues for medical and pharmaceutical purposes. Development of functional tissue requires deposition of multiple biomaterials encapsulating multiple cell types i.e. bio-ink necessitating switching ability between bio-inks. Existing systems use more than one print head to achieve this complex interchangeable deposition, which decreases efficiency, structural integrity, and accuracy. In this research, we developed a nozzle system capable of switching between multiple bio-inks with continuous deposition ensuring the minimum transition distance so that precise deposition transitioning can be achieved. Finally, the effect of rheological properties of different bio-material compositions on the transition distance is investigated by fabricating the sample scaffolds.
-
Abstract Three-dimensional bioprinting is a rapidly growing field attempting to recreate functional tissues for medical and pharmaceutical purposes. Development of functional tissue requires deposition of multiple biomaterials encapsulating multiple cell types i.e. bio-ink necessitating switching ability between bio-inks. Existing systems use more than one print head to achieve this complex interchangeable deposition, which decreases efficiency, structural integrity, and accuracy. In this research, we developed a nozzle system capable of switching between multiple bio-inks with continuous deposition ensuring the minimum transition distance so that precise deposition transitioning can be achieved. Finally, the effect of rheological properties of different bio-material compositions on the transition distance is investigated by fabricating the sample scaffolds.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
