skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Oscillations of a partially wetting bubble
We study the linear stability of a compressible sessile bubble in an ambient fluid that partially wets a planar solid support, where the gas is assumed to be an ideal gas that obeys the adiabatic law. The frequency spectrum is computed from an integrodifferential boundary value problem and depends upon the wetting conditions through the static contact angle $$\alpha$$ , the dimensionless equilibrium bubble pressure $$\varPi$$ , and the contact-line dynamics that we assume to be either (i) pinned or (ii) freely moving with fixed contact angle. Corresponding mode shapes are defined by the polar-azimuthal mode number pair $$[k,\ell ]$$ with $$k+\ell =\mathbb {Z}^{+}_{even}$$ . We report instabilities to the (i) $[0,0]$ breathing mode associated with volume change, and (ii) $[1,1]$ mode that is linked to horizontal centre-of-mass motion of the bubble. Stability diagrams and instability growth rates are computed, and the respective instability mechanisms are revealed through an energy analysis. The zonal $$\ell =0$$ modes are associated with volume change, and we show that there is a complex dependence between the classical volume and shape change modes for wetting conditions that differ from neutral wetting $$\alpha =90^\circ$$ . Finally, we show how the classical frequency degeneracy for the Rayleigh–Lamb modes of the free bubble splits for the azimuthal modes $$\ell \neq 0,1$$ .  more » « less
Award ID(s):
1935590
PAR ID:
10391459
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Journal of Fluid Mechanics
Volume:
945
ISSN:
0022-1120
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Drop-on-demand printing applications involve a drop connected to a fluid reservoir between which volume can be exchanged, a situation that can be idealized as a sessile drop with prescribed volume flux across the drop/reservoir boundary. Here we compute the frequency spectrum for these pressure disturbances, as it depends upon the static contact-angle $$\alpha$$ (CA) and an empirical constant $$\chi$$ relating the reservoir pressure to volume exchanged, for either (i) pinned or (ii) free contact-lines. Mode shapes are characterized by the mode number pair $$[k,\ell ]$$ with property $$k+\ell =\mathbb {Z}^{+}_{odd}$$ that can be associated with the symmetry properties of the Rayleigh drop modes for the free sphere. We report instabilities to the axisymmetric $[1,0]$ and non-axisymmetric rocking $[2,1]$ modes that are related to centre-of-mass motions, and show how the spectral degeneracy of the Rayleigh drop modes breaks with the model parameters. 
    more » « less
  2. In this work, we experimentally studied bubble formation on the superhydrophobic surface (SHS) under a constant gas flow rate and at quasi-static regime. SHS with a radius RSHS ranging from 4.2 to 19.0 mm was used. We observed two bubbling modes A and B, depending on RSHS. In mode A for small RSHS, contact line fixed at the rim of SHS, and contact angle (θ) initially reduced, then maintained as a constant, and finally increased. In mode B for large RSHS, contact line continuously expanded, and θ slowly reduced. For both modes, during necking, contact line retracts, and θ was close to the equilibrium contact angle. Moreover, the pinch-off of bubble at the early stage was similar to the pinch-off of bubble from a nozzle and followed a power-law relation Rneck ∼ τ0.54, where Rneck is the minimum neck radius and τ is the time to detaching. Furthermore, we calculated the forces acting on the bubble and found a balance between one lifting force (pressure force) and two retaining forces (surface tension force and buoyancy force). Last, we found a waiting time for a finite volume to be detected for large RSHS. The detached volume was well predicted by Tate volume, which was derived based on balance between buoyancy and surface tension and was a function of bubble base radius. 
    more » « less
  3. The energetics of drop deposition are considered in the capillary-ballistic regime characterized by high Reynolds number and moderate Weber number. Experiments are performed impacting water/glycol drops onto substrates with varying wettability and contact-angle hysteresis. The impacting event is decomposed into three regimes: (i) pre-impact, (ii) inertial spreading and (iii) post contact-line (CL) pinning, conveniently framed using the theory of Dussan & Davis ( J. Fluid Mech. , vol. 173, 1986, pp. 115–130). During fast-time-scale inertial spreading, the only form of dissipation is CL dissipation ( $$\mathcal {D}_{CL}$$ ). High-speed imaging is used to resolve the stick-slip dynamics of the CL with $$\mathcal {D}_{CL}$$ measured directly from experiment using the $$\Delta \alpha$$ - $$R$$ cyclic diagram of Xia & Steen ( J. Fluid Mech. , vol. 841, 2018, pp. 767–783), representing the contact-angle deviation against the CL radius. Energy loss occurs on slip legs, and this observation is used to derive a closed-form expression for the kinetic K and interfacial $$\mathcal{A}$$ post-pinning energy $$\{K+\mathcal {A}\}_p/\mathcal {A}_o$$ independent of viscosity, only depending on the rest angle $$\alpha _p$$ , equilibrium angle $$\bar {\alpha }$$ and hysteresis $$\Delta \alpha$$ , which agrees well with experimental observation over a large range of parameters, and can be used to evaluate contact-line dissipation during inertial spreading. The post-pinning energy is found to be independent of the pre-impact energy, and it is broken into modal components with corresponding energy partitioning approximately constant for low-hysteresis surfaces with fixed pinning angle $$\alpha _p$$ . During slow-time-scale post-pinning, the liquid/gas ( $lg$ ) interface is found to vibrate with the frequencies and mode shapes predicted by Bostwick & Steen ( J. Fluid Mech. , vol. 760, 2014, pp. 5–38), irrespective of the pre-impact energy. Resonant mode decay rates are determined experimentally from fast Fourier transforms of the interface dynamics. 
    more » « less
  4. Ultra-magnetized plasmas, where the magnetic field strength exceeds the Schwinger field of about BQ≈4×1013 G, become of great scientific interest, thanks to the current advances in laser-plasma experiments and astrophysical observations of magnetar emission. These advances demand better understanding of how quantum electrodynamics (QED) effects influence collective plasma phenomena. In particular, Maxwell's equations become nonlinear in the strong-QED regime. Here we present the “QED plasma framework,” which will allow one to systematically explore collective phenomena in a QED-plasma with arbitrary strong magnetic field. Further, we illustrate the framework by exploring low-frequency modes in the ultra-magnetized, cold, electron-positron plasmas. We demonstrate that the classical picture of five branches holds in the QED regime; no new eigenmodes appear. The dispersion curves of all the modes are modified. The QED effects include the overall modification to the plasma frequency, which becomes field-dependent. They also modify resonances and cutoffs of the modes, which become both field- and angle-dependent. The strongest effects are (i) the field-induced transparency of plasma for the O-mode via the dramatic reduction of the low-frequency cutoff well below the plasma frequency, (ii) the Alfvén mode suppression in the large-k regime via the reduction of the Alfvén mode resonance, and (iii) the O-mode slowdown via strong angle-dependent increase in the index of refraction. These results should be important for understanding of a magnetospheric pair plasma of a magnetar and for laboratory laser-plasma experiments in the QED regime. 
    more » « less
  5. A theoretical study is made of the stability of propagating internal gravity wave modes along a horizontal stratified fluid layer bounded by rigid walls. The analysis is based on the Floquet eigenvalue problem for infinitesimal perturbations to a wave mode of small amplitude. The appropriate instability mechanism hinges on how the perturbation spatial scale relative to the basic-state wavelength, controlled by a parameter $$\mu$$ , compares to the basic-state amplitude parameter, $$\epsilon \ll 1$$ . For $$\mu ={O}(1)$$ , the onset of instability arises due to perturbations that form resonant triads with the underlying wave mode. For short-scale perturbations such that $$\mu \ll 1$$ but $$\alpha =\mu /\epsilon \gg 1$$ , this triad resonance instability reduces to the familiar parametric subharmonic instability (PSI), where triads comprise fine-scale perturbations with half the basic-wave frequency. However, as $$\mu$$ is further decreased holding $$\epsilon$$ fixed, higher-frequency perturbations than these two subharmonics come into play, and when $$\alpha ={O}(1)$$ Floquet modes feature broadband spectrum. This broadening phenomenon is a manifestation of the advection of small-scale perturbations by the basic-wave velocity field. By working with a set of ‘streamline coordinates’ in the frame of the basic wave, this advection can be ‘factored out’. Importantly, when $$\alpha ={O}(1)$$ PSI is replaced by a novel, multi-mode resonance mechanism which has a stabilising effect that provides an inviscid short-scale cut-off to PSI. The theoretical predictions are supported by numerical results from solving the Floquet eigenvalue problem for a mode-1 basic state. 
    more » « less