skip to main content


Title: Harnessing Nonuniform Pressure Distributions in Soft Robotic Actuators
  more » « less
Award ID(s):
2042411
NSF-PAR ID:
10392258
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Intelligent Systems
Volume:
5
Issue:
2
ISSN:
2640-4567
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Soft actuators have been studied and analyzed as a new solution for soft robotic technologies. These types of actuators have many advantages due to their predictable deformations and their ease of control, enabling them to hold and move delicate objects performing complex movements in confined spaces. Soft actuators can be made using different manufacturing processes, but the most common is mold casting. However, this manufacturing process involves several steps, increasing the manufacturing time and hindering changes in the design. This paper presents a novel design of a 3D printed soft pneumatic actuator based on additive manufacturing, achieving design versatility and performance. The produced actuator has seven segments that can be individually controlled. The actuators were made using fused deposition modeling (FDM) technology in one continuous process and without support material. The mechanical performance of the soft actuators was demonstrated, analyzing the deformation in the z-axis based on input pressure. 
    more » « less
  2. Soft and continuously controllable grippers can be assembled from fluidic prestressed composite (FPC) actuators. Due to their highly deformable features, it is difficult to model such actuators for large deflections. This article proposes a new method for modeling large deflections of FPC actuators called the chained composite model (CCM) to characterize the quasi-static response to an applied fluid pressure and load. The CCM divides an FPC actuator into discrete elements and models each element by a small rotation model. The strain energy of each element and the work done by pressure and loads are computed using third-order displacement polynomials with unknown coefficients; then, the total energy is minimized to calculate stable shapes using the Rayleigh–Ritz method. This study provides a set of systematic design rules to help the robotics community create FPC actuators by understanding how their responses vary as a function of input forces and pressures for a number of modeling and design parameters. Composite actuators are fabricated and a soft gripper is developed to demonstrate the grasping ability of the FPCactuators. Pneumatic pressure and end loads are applied to the composite actuators, and their responses are measured. The modeled responses of the actuators are shown to be in agreement with the measured responses. 
    more » « less
  3. Fluidic soft actuators are enlarging the robotics toolbox by providing flexible elements that can display highly complex deformations. Although these actuators are adaptable and inherently safe, their actuation speed is typically slow because the influx of fluid is limited by viscous forces. To overcome this limitation and realize soft actuators capable of rapid movements, we focused on spherical caps that exhibit isochoric snapping when pressurized under volume-controlled conditions. First, we noted that this snap-through instability leads to both a sudden release of energy and a fast cap displacement. Inspired by these findings, we investigated the response of actuators that comprise such spherical caps as building blocks and observed the same isochoric snapping mechanism upon inflation. Last, we demonstrated that this instability can be exploited to make these actuators jump even when inflated at a slow rate. Our study provides the foundation for the design of an emerging class of fluidic soft devices that can convert a slow input signal into a fast output deformation. 
    more » « less
  4. Current models of bending in soft arms are formulated in terms of experimentally determined, arm-specific parameters, which cannot evaluate fundamental differences in soft robot arm design. Existing models are successful at improving control of individual arms but do not give insight into how the structure of the arm affects the arm’s capabilities. For example, omnidirectional soft robot arms most frequently have three parallel actuators, but may have four or more, while common biological arms, including octopuses, have tens of distinct longitudinal muscle bundles. This article presents a quasi-static analytical model of soft arms bent with longitudinal actuators, based on equilibrium principles and assuming an unknown neutral axis location. The model is presented as a generalizable framework and specifically implemented for an arm with [Formula: see text] fluid-driven actuators, a subset of which are pressurized to induce a bend with a certain curvature and direction. The presented implementation is validated experimentally using planar (2D) and spatial (3D) bends. The planar model is used to initially estimate pressure for a closed-loop curvature control system and to bound the accessible configurations for a rapidly-exploring random trees (RRT) motion planner. A three-segment planar arm is demonstrated to navigate along a planned trajectory through a gap in a wall. Finally, the model is used to explore how the arm morphology affects maximum curvature and directional resolution. This research analytically connects soft arm structure and actuator behavior to unloaded arm performance, and the results may be used to methodically design soft robot arms. 
    more » « less
  5. Abstract

    Soft robotic devices containing multiple actuating elements have successfully recapitulated complex biological motion, leading to their utility in biomedical applications. However, there are inherent nonlinear mechanics associated with soft composite materials where soft actuators are embedded in elastomeric matrices. Predicting their overall behavior prior to fabrication and subsequent experimental characterization can therefore present a hurdle in the design process and in efficiently satisfying functional requirements and specifications. In this work, a computational design framework for optimizing the motion and function of biomimetic soft robotic composites is demonstrated by conducting a design case study of soft robotic cardiac muscle (myocardium) with a particular focus on applications including replicating and assisting cardiac motion and function. A finite element model of a soft robotic myocardium is built, in which actuators are prescribed with anisotropic strain to simulate local deformation, and various design parameters are investigated by evaluating the performance of each configuration in terms of ventricular twist, volumetric output, and pressure generation. Then, an optimized design is proposed that recapitulates the physiological motion and hemodynamics of the heart, and its thrombogenicity is further explored using a fluid‐structure interaction model. This framework has broader utility in predicting the performance of other soft robotic embedded composites.

     
    more » « less