skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Design, Modeling, and Simulation of a 2.4 GHz Near-field Phased-Array based Wireless Power Transfer System for Brain Neuromodulation Applications
Title: Design, Modeling, and Simulation of a 2.4 GHz Near-field Phased-Array based Wireless Power Transfer System for Brain Neuromodulation Applications
To avoid interruption of experiment and risk of infection, wireless power transfer (WPT) techniques have been used to eliminate the bulky wires and batteries attached to the animals in rodent electrophysiological applications for long-term in-vivo electrophysiological recordings. Headstage-based neuromodulation device has become one of the most popular methods for neural stimulation in recent times. In this work, a wireless power transfer system is designed which provides a constant power to a headstage based optogenetic stimulator. The proposed research is composed of two parts: i) a unidirectional 28 cm × 21 cm phased array transmitter antenna, and ii) an electrically small bi-directional 2.4 cm × 2.4 cm receiver antenna. A phased array transmitter antenna is designed to provide a uniform power transmission over the 27 cm × 23 cm × 16 cm rat behavioral cage area. The proposed WPT scheme utilizes a near-field power transmission scheme at 2.4 GHz frequency. Simulation results show that the transmitter antenna achieves a -24 dB and receiver antenna achieves a −27 dB return loss (S 11 ) at the resonating frequency. The proposed WPT system shows a maximum of 24.5% power transfer efficiency (PTE) when the receiver is in the center position and is 10 cm distance apart from the transmitter, which is much higher compared to the other state-of-the-art works. The transmitter antenna steers beam from −21° to 27° in ϕ axis and −108° to 74° in θ axis which covers the maximum 6.27 cm 2 area of the cage. The preliminary simulation results of the proposed WPT module show a better prospect for future optogenetics based applications.  more » « less
Award ID(s):
1943990
PAR ID:
10394662
Author(s) / Creator(s):
;
Date Published:
Journal Name:
2022 IEEE Texas Symposium on Wireless and Microwave Circuits and Systems (WMCS)
Page Range / eLocation ID:
1 to 5
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI))
    This paper presents modeling and optimization of the steering range of a microstrip planar phased array antenna to steer the unidirectional near-field focused beam towards a certain direction. This antenna can be implemented in headstage-based neural stimulation system and wireless recording system for optogenetic neuromodulation applications. The proposed phased-array antenna consists of sixteen elements that are designed to provide a uniform power transmission over the 27 cm×23 cm×16 cm rat behavioral cage area. The proposed transmitter (TX) antenna implements a near-field-based wireless power transmission system operating at 2.4 GHz frequency. The phased array antenna steers the beam from -30° to 60° in the elevation plane by feeding the individual elements with different phases using four 4-bit phase shifters. A design analysis of the beam-steering approach of the phased array antenna is presented and the corresponding simulation and measurement results are included in this paper. 
    more » « less
  2. (, 2023 USNC-URSI National Radio Science Meeting)
    This paper presents a magnetic sensor based autotracking method for a phased array based wireless power transfer system to be implemented in neuromodulation applications. This method is proposed to track the position of the receiver(placed on a freely moving animal) and transmit the microwave signal with a focused beam to the target receiver. The coordinate locations of the target are obtained from the magnetic sensor and converted into phase information for the phased array. The system is constructed by a 2.4 GHz near-field 4×4 phased array transmitter antenna with 4-bit phase shifters. The phased array TX antenna steers the beam from -5° to -155° in the θ plane. The magnetic sensor can detect the location of the receiver and the in this steering range. The process of tracking the the target and focusing the beam has been evaluated by simulation. 
    more » « less
  3. ; ; ; ; (, 2020 IEEE Radio and Wireless Symposium (RWS))
    null (Ed.)
    Wirelessly powered neural stimulation and recording system is crucially important for the long-term study of the animal behaviors for the treatment of chronic neuropathic diseases. Headstage based neural implant is one of the popular methods to stimulate the neurons. In this work, a homecage based wireless power transfer (WPT) system is developed to supply power to a 3-D printed headstage which consists of a receiver (RX) coil, a rectifier and a light-emitting diode (LED) for optogenetic stimulation. A multilayer transmitter (TX) coil is designed to provide power over the 28.5 cm × 18 cm homecage area. The proposed system is able to achieve a maximum of 41.7% efficiency at 5 cm distance through air media using less number of headstage resonators compared to the other state-of-the art works. 
    more » « less
  4. ; ; (, IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology)
    This work presents a miniaturized wireless power transfer (WPT) system integrated with a neuromodulation headstage for duty-cycled optical stimulation of freely moving rodents. The proposed WPT system is built using the commercially available off-the-shelf components (COTS) for the optogenetic neuromodulation system consisting of a bridge rectifier, a DC-DC converter, an oscillator circuit, an LED driver, and a μLED. The total power consumption of the stimulation system is 14 mW which is provided using the WPT method. The WPT system includes a novel transmitter (TX) coil implemented on a printed circuit board (PCB), and a solenoid receiver (RX) coil wrapped around a customized 3-D printed headstage. The proposed TX coil is designed in such a way that the magnetic field all across the TX coil is sufficient to provide the required power to the optical stimulation system that is worn as a headstage by the freely moving rat. The headstage device's dimension is 18.75 mm × 21.95 mm, weighing 4.75 g. The ratio of the weight of the headstage and rat is 4.75:300. The proposed system is able to achieve a maximum overall efficiency of ∼63% at 5 cm separation between the TX and RX coils, where the maximum power transfer efficiency (PTE) of the WPT system is ∼88% and the power conversion efficiency (PCE) of the rectifier is 71.6%. The proposed system with reconfigurable stimulation frequency is suitable for exciting different brain areas for long-term health monitoring. 
    more » « less
  5. ; ; ; ; (, 2020 IEEE 14th Dallas Circuits and Systems Conference (DCAS))
    For the treatment of chronic neuropathic diseases, long-term behavior study of the patient is very important. The behavior study is performed using neural stimulation and simultaneously recording the response from the neural cells. Headstage-based neuromodulation device has become one of the popular methods for neural stimulation in recent times. In this work, a wirelessly powered system is presented that provides constant power to a headstage based optogenetic stimulator, which includes a receiver (RX) coil, a rectifier, and an mm-sized light-emitting-diode (LED). A multi-layered transmitter (TX) coil is designed to provide uniform power transmission over the 20.7 cm × 14 cm mouse behavioral cage area. A maximum of ~49% efficiency is achieved using the proposed system at 3 cm distance through the air media at 13.56 MHz operating frequency. The proposed system uses less number of headstage resonators on the 3-D printed light-weight headstage which is able to achieve higher efficiency compared to the other state-of-the-art. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email