To avoid interruption of experiment and risk of infection, wireless power transfer (WPT) techniques have been used to eliminate the bulky wires and batteries attached to the animals in rodent electrophysiological applications for long-term in-vivo electrophysiological recordings. Headstage-based neuromodulation device has become one of the most popular methods for neural stimulation in recent times. In this work, a wireless power transfer system is designed which provides a constant power to a headstage based optogenetic stimulator. The proposed research is composed of two parts: i) a unidirectional 28 cm × 21 cm phased array transmitter antenna, and ii) an electrically small bi-directional 2.4 cm × 2.4 cm receiver antenna. A phased array transmitter antenna is designed to provide a uniform power transmission over the 27 cm × 23 cm × 16 cm rat behavioral cage area. The proposed WPT scheme utilizes a near-field power transmission scheme at 2.4 GHz frequency. Simulation results show that the transmitter antenna achieves a -24 dB and receiver antenna achieves a −27 dB return loss (S 11 ) at the resonating frequency. The proposed WPT system shows a maximum of 24.5% power transfer efficiency (PTE) when the receiver is in the center position and is 10 cm distance apart from the transmitter, which is much higher compared to the other state-of-the-art works. The transmitter antenna steers beam from −21° to 27° in ϕ axis and −108° to 74° in θ axis which covers the maximum 6.27 cm 2 area of the cage. The preliminary simulation results of the proposed WPT module show a better prospect for future optogenetics based applications.
more »
« less
This content will become publicly available on July 23, 2024
Modeling and Optimization of the Steering Range of a Phased Array Antenna for Neuromodulation Applications in the Near-Field Region
This paper presents modeling and optimization of the steering range of a microstrip planar phased array antenna to steer the unidirectional near-field focused beam towards a certain direction. This antenna can be implemented in headstage-based neural stimulation system and wireless recording system for optogenetic neuromodulation applications. The proposed phased-array antenna consists of sixteen elements that are designed to provide a uniform power transmission over the 27 cm×23 cm×16 cm rat behavioral cage area. The proposed transmitter (TX) antenna implements a near-field-based wireless power transmission system operating at 2.4 GHz frequency. The phased array antenna steers the beam from -30° to 60° in the elevation plane by feeding the individual elements with different phases using four 4-bit phase shifters. A design analysis of the beam-steering approach of the phased array antenna is presented and the corresponding simulation and measurement results are included in this paper.
more »
« less
- Award ID(s):
- 2309413
- NSF-PAR ID:
- 10488879
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI)
- Page Range / eLocation ID:
- 1387 to 1388
- Format(s):
- Medium: X
- Location:
- Portland, OR, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents a magnetic sensor based autotracking method for a phased array based wireless power transfer system to be implemented in neuromodulation applications. This method is proposed to track the position of the receiver(placed on a freely moving animal) and transmit the microwave signal with a focused beam to the target receiver. The coordinate locations of the target are obtained from the magnetic sensor and converted into phase information for the phased array. The system is constructed by a 2.4 GHz near-field 4×4 phased array transmitter antenna with 4-bit phase shifters. The phased array TX antenna steers the beam from -5° to -155° in the θ plane. The magnetic sensor can detect the location of the receiver and the in this steering range. The process of tracking the the target and focusing the beam has been evaluated by simulation.more » « less
-
This paper presents a compact phased-array antenna for efficient and high-gain millimeter-wave-based 3D beam steering applications. The proposed antenna array consists of 2 × 2 unit cells and each unit cell is a sub-array comprising of 2 × 2 patch elements connected to microstrip lines that are co-fed by a single coaxial cable. Two 45° phase shifting lines are incorporated in each sub-array to facilitate the wide beamsteering range. The dimensions of the proposed phased array antenna are 24 × 24 × 0.324 mm 3 . Simulation results show that the proposed phased-array antenna has a resonating frequency at 58.4 GHz with an operational bandwidth from 50.1 GHz to 77.5 GHz along with a high gain of 26.8 dBi. The array exhibits a maximum beam steering range of 105° in the elevation plane and 195° in the azimuth plane with a gain variation less than 0.9 dBi.more » « less
-
This paper proposes a new over-the-air (OTA) calibration method for millimeter wave phased arrays. Our method leverages the channel estimation process which is a fundamental part of any wireless communication system. By performing the channel estimation while changing the phase of an antenna element, the phase response of the element can be estimated. The relative phase of the phased array can also be obtained by collecting all the estimated phase responses with a shared reference state. Hence, the phase mismatches of the phased array can be resolved. Unlike prior work, our calibration method embraces all the array components such as power-divider, phase shifter, amplifier and antenna and thus, spans the full chain. By overriding channel estimation, our proposed technique does not require any additional circuits for calibration. Furthermore, the calibration can be performed online without the need to pause the communication. We tested our method on an eight element phased array at 24GHz which we designed and fabricated in PCB for verification. The measured beam patterns prove the viability of our proposed method.more » « less
-
UAVs need to communicate along three dimensions (3D) with other aerial vehicles, ranging from above to below, and often need to connect to ground stations. However, wireless transmission in 3D space significantly dissipates power, often hindering the range required for these types of links. Directional transmission is one way to efficiently use available wireless channels to achieve the desired range. While multiple-input multiple-output (MIMO) systems can digitally steer the beam through channel matrix manipulation without needing directional awareness, the power resources required for operating multiple radios on a UAV are often logistically challenging. An alternative approach to streamline resources is the use of phased arrays to achieve directionality in the analog domain, but this requires beam sweeping and results in search-time delay. The complexity and search time can increase with the dynamic mobility pattern of the UAVs in aerial networks. However, if the direction of the receiver is known at the transmitter, the search time can be significantly reduced. In this work, multi-antenna channels between two UAVs in A2A links are analyzed, and based on these findings, an efficient machine learning-based method for estimating the direction of a transmitting node using channel estimates of 4 antennas (2 × 2 MIMO) is proposed. The performance of the proposed method is validated and verified through in-field drone-to-drone measurements. Findings indicate that the proposed method can estimate the direction of the transmitter in the A2A link with 86% accuracy. Further, the proposed direction estimation method is deployable for UAV-based massive MIMO systems to select the directional beam without the need to sweep or search for optimal communication performance.more » « less
