More Like this

1. Frequency Scan–Based Mitigation Approach of Subsynchronous Control Interaction in Type-3 Wind Turbines

   https://doi.org/10.3390/en14154626  

   Alatar, Faris ; Mehrizi-Sani, Ali ( August 2021 , Energies)

   null (Ed.)

   Integration of wind energy resources into the grid creates several challenges for power system dynamics. More specifically, Type-3 wind turbines are susceptible to subsynchronous control interactions (SSCIs) when they become radially connected to a series-compensated transmission line. SSCIs can cause disruptions in power generation and can result in significant damage to wind farm (WF) components and equipment. This paper proposes an approach to mitigate SSCIs using an online frequency scan, with optimized phase angles of voltage harmonic injection to maintain steady-state operation, to modify the controllers or the operating conditions of the wind turbine. The proposed strategy is simulated in PSCAD/EMTDC software on the IEEE second benchmark model for subsynchronous resonance. Simulation results demonstrate the effectiveness of this strategy by ensuring oscillations do not grow. 

   more » « less
2. Profitability optimization of a wind power plant performed through different optimization algorithms and a data-driven RANS solver

   https://doi.org/10.2514/6.2018-2018  

   Santhanagopalan, Vignesh ; Letizia, Stefano ; Zhan, Lu ; Al-Hamidi, Louay Yahia ; Iungo, Giacomo Valerio ( January 2018 , 2018 Wind Energy Symposium)

   null (Ed.)

   This work focuses on the optimization of performance and profitability of a wind farm carried out by means of an economic model and Reynolds-Averaged Navier-Stokes (RANS) simulations of wind turbine wakes. Axisymmetric RANS simulations of isolated wind turbine wakes are leveraged with a quadratic super-positioning model to estimate wake interactions within wind farms. The resulting velocity field is used with an actuator disk model to predict power production from each turbine in the wind farm. Design optimization is performed by considering a site in North Texas, whose wind resource statistics are obtained from a meteorological tower. The RANS solver provides capabilities to simulate different incoming wind turbulence intensities and, hence, the wind farm optimization is performed by taking the daily cycle of the atmospheric stability into account. The objective functional of the optimization problem is the levelized cost of energy (LCoE) encompassing capital cost, operation and maintenance costs, land cost and annual power production. At the first level of the optimization problem, the wind farm gross capacity is determined by considering three potential turbine types with different rated power. Subsequently, the optimal wind farm layout is estimated by varying the uniform spacing between consecutive turbine rows. It is found that increasing turbine rated power, the wind farm profitability is enhanced. Substituting a wind farm of 24 turbines of 2.3-MW rated power with 18, 3-MW turbines could reduce the LCoE of about 1.56 $/MWh, while maintaining a similar gross capacity factor. The optimization of the spacing between turbine rows was found to be sensitive to the land cost. For a land cost of 0.05 $/m2, the layout could be designed with a spacing between 6 to 15 rotor diameters without any significant effect on the LCoE, while an increased land cost of 0.1 $/m2 leads to an optimal spacing of about 6 rotor diameters. 

   more » « less
3. Wind Farm Prediction of Icing Based on SCADA Data

   https://doi.org/10.3390/en17184629  

   Zhang, Yujie ; Rotea, Mario ; Kehtarnavaz, Nasser ( September 2024 , Energies)

   In cold climates, ice formation on wind turbines causes power reduction produced by a wind farm. This paper introduces a framework to predict icing at the farm level based on our recently developed Temporal Convolutional Network prediction model for a single turbine using SCADA data.First, a cross-validation study is carried out to evaluate the extent predictors trained on a single turbine of a wind farm can be used to predict icing on the other turbines of a wind farm. This fusion approach combines multiple turbines, thereby providing predictions at the wind farm level. This study shows that such a fusion approach improves prediction accuracy and decreases fluctuations across different prediction horizons when compared with single-turbine prediction. Two approaches are considered to conduct farm-level icing prediction: decision fusion and feature fusion. In decision fusion, icing prediction decisions from individual turbines are combined in a majority voting manner. In feature fusion, features of individual turbines are averaged first before conducting prediction. The results obtained indicate that both the decision fusion and feature fusion approaches generate farm-level icing prediction accuracies that are 7% higher with lower standard deviations or fluctuations across different prediction horizons when compared with predictions for a single turbine.

    

   more » « less
4. Dynamic wake modeling and state estimation for improved model-based receding horizon control of wind farms

   https://doi.org/10.23919/ACC.2017.7963036  

   Shapiro, Carl R. ; Meyers, Johan ; Meneveau, Charles ; Gayme, Dennice F. ( May 2017 , American Control Conference)

   Power tracking is an emerging application for wind farm control designs that allows farms to participate in a wider range of grid services, such as secondary frequency regulation. Control designs that enable large wind farms to follow a time-varying power trajectory are complicated by aerodynamic interactions that make it impossible to decouple upstream wind turbine control actions from downstream power production. This coupling is particularly important in applications where the reference trajectory is changing faster than, or at a similar rate as, the propagation of turbine wakes through the farm. In this work we overcome these difficulties by using a dynamic wake model that accounts for wake expansion, advection, and multi-wake interactions within a model-based receding horizon controller for coordinated control of a large multi-turbine wind farm. An ensemble Kalman filter is employed for state estimation and error correction at the turbine level. We implement the controller in high-fidelity numerical simulations of a wind farm with 84 turbines and then test the controlled farm's ability to track a power reference signal. The results demonstrate the ability of the control algorithm to track two types of power reference signals used by a US independent system operator. 

   more » « less
5. A general method to estimate wind farm power using artificial neural networks

   https://doi.org/10.1002/we.2379  

   Yan, Chi ; Pan, Yang ; Archer, Cristina L. ( July 2019 , Wind Energy)

   An artificial neural network (ANN) is trained and validated using a large dataset of observations of wind speed, direction, and power generated at an offshore wind farm (Lillgrund in Sweden). In its traditional form, the ANN is used to generate a new two‐dimensional power curve, which predicts with high accuracy (bias ∼−0.5%and absolute error ∼2%) the power of the entire Lillgrund wind farm based on wind speed and direction. By contrast, manufacturers only provide one‐dimensional power curves (i.e., power as a function of wind speed) for a single turbine. The second innovative application of the ANN is the use of a geometric model (GM) to calculate two simple geometric properties to replace wind direction in the ANN. The resulting GM‐ANN has the powerful feature of being applicable to any wind farm, not just Lillgrund. A validation at an onshore wind farm (Nørrekær in Denmark) demonstrates the high accuracy (bias ∼−0.7%and absolute error ∼6%) and transfer‐learning ability of the GM‐ANN.

    

   more » « less