An official website of the United States government
Abstract Soil penetration is an energy-intensive process that is common in both nature and civil infrastructure applications. Many human construction activities involve soil penetration that is typically accomplished through impact-driving, pushing against a reaction mass, excavating, or vibrating using large equipment. This paper presents a numerical investigation into the self-penetration process of a probe that uses an ‘anchor–tip’ burrowing strategy with the goal of extending the mechanics-based understanding of burrower–soil interactions at the physical dimensions and stress levels relevant for civil infrastructure applications. Self-penetration is defined here as the ability of a probe to generate enough anchorage forces to overcome the soil penetration resistance and advance the probe tip to greater depths. 3D Discrete element modeling simulations are employed to understand the self-penetration process of an idealized probe in noncohesive soil along with the interactions between the probe’s anchor and tip. The results indicate that self-penetration conditions improve with simulated soil depth, and favorable probe configurations for self-penetration include shorter anchor–tip distances, anchors with greater length and expansion magnitudes, and anchors with a greater friction coefficient. The results shed light on the scaling of burrowing forces across a range of soil depths relevant to civil infrastructure applications and provide design guidance for future self-penetrating probes.
more »
« less
Discrete element modeling of the anchor-tip interactions during self-penetration of a bio-inspired probe
Site characterization activities, such as Cone Penetration Testing (CPT), Pressuremeter Testing (PMT), and Dilatometer Testing (DMT), can be compromised due to challenges associated with equipment mobilization. This situation is common at locations such as the toe of dams, dense urban environments, deep water, and extraterrestrial bodies. This research uses bio-inspiration to develop a probe that can penetrate itself into the subsurface, eliminating the need for a drill rig to provide the reaction mass. This probe uses an adaptation employed by razor clams, worms, and caecilians where a body section is radially expanded to form an anchor which generates the reaction force needed to penetrate the soil. This paper presents a Discrete Element Modeling (DEM) study of the self-penetration process of this probe. Analysis of soil stress states indicates that the probe configuration influences its self-penetration ability. Specifically, the distance between the anchor and the tip affects the interaction between these probe parts due to principal stress rotation and arching. The results indicate that self-penetration is achievable in medium-dense coarse-grained soil by bio-inspired probes with smaller anchor-tip spacings and provide useful information for the design of future probe prototypes.
more »
« less
- Award ID(s):
- 1942369
- PAR ID:
- 10399072
- Date Published:
- Journal Name:
- Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Soil penetration is a ubiquitous energy-intensive process in geotechnical engineering that is typically accomplished by quasi-static pushing, impact driving, or excavating. In contrast, organisms such as marine and earthworms, razor clams, and plants have developed efficient penetration strategies. Using motion sequences inspired by these organisms, a probe that uses a self-contained anchor to generate the reaction force required to advance its tip to greater depths has been conceptualized. This study explores the interactions between this probe and coarse-grained soil using 3D discrete element modeling. Spatial distributions of soil effective stresses indicate that expansion of the anchor produces arching and rotation of principal effective stresses that facilitate penetration by inducing stress relaxation around the probe’s tip and stress increase around the anchor. Spatial strain maps highlight the volumetric deformations around the probe, while measurements of both stresses and strains show that the state of the soil around the anchor and tip evolves toward the critical state line. During subsequent tip advancement, the stresses and strains are similar to those during initial insertion, leading to the remobilization of the tip resistance. Longer anchor and shorter anchor-to-tip distance better facilitate tip advancement by producing greater stress relaxation ahead of the tip.more » « less
-
Abstract Development of self-burrowing probes that can penetrate soils without the aid of external reaction force from drill rigs and trucks would facilitate site characterization activities and deployment of sensors underneath existing structures and in locations with limited access (e.g., toe of dams, extraterrestrial bodies). Successful deployment of self-burrowing probes in the field will require several cycles of expansion, penetration, and contraction motions due to the geometric constraints and the increase in soil strength with depth. This study explores the multi-cycle performance of a dual-anchor self-burrowing probe in granular assemblies of varying density using discrete element modeling simulations. The simulated probe consists of an expandable top shaft, expandable bottom shaft, and a conical tip. The expansion of the shafts are force-controlled, the shaft contraction and tip advancement are displacement-controlled, and the horizontal tip oscillation is employed to reduce the penetration resistance. The performance of the self-burrowing probe in terms of self-burrowing distance is greater in the medium dense specimen than in the dense and loose specimens due to the high magnitude of anchorage force in comparison with penetration resistance. For all three soil densities, most of the mechanical work is done by tip oscillation; however, this accounts for a greater percentage of the total work in the denser specimen. Additionally, while tip oscillation aids in enabling self-burrowing to greater depths, it also produces a greater work demand. The results presented here can help evaluate the effects of soil density on probe prototypes and estimate the work requited for self-burrowing.more » « less
-
Equipment used for site investigation activities like drill rigs are typically large and heavy to provide sufficient reaction mass to overcome the soil’s penetration resistance. The need for large and heavy equipment creates challenges for performing site investigations at sites with limited accessibility, such as urban centres, vegetated areas, locations with height restrictions and surficial soft soils, and steep slopes. Also, mobilization of large equipment to the project site is responsible for a significant portion of the carbon footprint of site investigations. Successful development of self-burrowing technology can have enormous implications for geotechnical site investigation, ranging from performance of in-situ tests to installation of instrumentation without the need of heavy equipment. During the last decade there has been an acceleration of research in the field of bio-inspired geotechnics, whose premise is that certain animals and plants have developed efficient strategies to interact with geomaterials in ways that are analogous to those in geotechnical engineering. This paper provides a synthesis of advances in bio-inspired site investigation related to the (i) reduction of penetration resistance by means of modifying the tip shape, expanding a shaft section near the probe tip, applying motions to the tip like rotation and oscillation, and injecting fluids and (ii) generation of reaction forces with temporary anchors that enable self-burrowing. Examples of prototypes that have been tested experimentally are highlighted. However, there are important research gaps associated with testing in a broader range of conditions, interpretation of results, and development of hardware that need to be addressed to develop field-ready equipment that can provide useful data for geotechnical design.more » « less
-
Site investigation (SI) and subsurface exploration are vital for characterizing soil properties. However, a common challenge is the lack of sufficient reaction force to penetrate through stiff crusts or deep layers, leading to refusal. To address this issue, rigs typically have large sizes that can make mobility and accessibility challenging and increase the carbon footprint of SI activities. This paper experimentally investigates a plant root-inspired strategy called circumnutation-inspired motion (CIM) to reduce the vertical penetration forces (F_z) in comparison to quasi-static penetration used for example for Cone Penetration Testing (CPT). The CIM probes have a bent tip end and are rotated at a constant angular velocity (ω) while they are advanced at a constant vertical velocity (v) in uniform specimens of clay and sand. F_z for both soils decay exponentially by factors as high as 10 with increasing relative velocity, defined as the ratio of the tangential to the vertical velocity of the probe tip (ωR\/v). Torques for both soils increase with initial increases in ωR\/v which stabilize at higher velocities. While the cumulative total work, calculated for both clay and sand from the measured forces and torques, increases less than 25% for initial increases in ωR\/v between 0 and 0.3π, the F_z can be reduced by around 50%. Thus, CIM penetration can produce significant reductions in F_z in comparison to CPTs while limiting the additional energy consumed. CIM could be implemented to perform site investigation activities, such as obtaining samples or installing sensors, using smaller-sized, light-weight rigs.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
