skip to main content

Explore Research Products in the NSF-PAR

Title: Learning to Design Accurate Deep Learning Accelerators with Inaccurate Multipliers
Approximate computing is a promising way to improve the power efficiency of deep learning. While recent work proposes new arithmetic circuits (adders and multipliers) that consume substantially less power at the cost of computation errors, these approximate circuits decrease the end-to-end accuracy of common models. We present AutoApprox, a framework to automatically generate approximate low-power deep learning accelerators without any accuracy loss. AutoApprox generates a wide range of approximate ASIC accelerators with a TPUv3 systolic-array template. AutoApprox uses a learned router to assign each DNN layer to an approximate systolic array from a bank of arrays with varying approximation levels. By tailoring this routing for a specific neural network architecture, we discover circuit designs without the accuracy penalty from prior methods. Moreover, AutoApprox optimizes for the end-to-end performance, power and area of the the whole chip and PE mapping rather than simply measuring the performance of the arithmetic units in iso-lation. To our knowledge, our work is the first to demonstrate the effectiveness of custom-tailored approximate circuits in delivering significant chip-level energy savings with zero accuracy loss on a large-scale dataset such as ImageNet. AutoApprox synthesizes a novel approximate accelerator based on the TPU that reduces end-to-end power consumption by 3.2% and area by 5.2% at a sub-10nm process with no degradation in ImageNet validation top-1 and top-5 accuracy.  more » « less
Award ID(s):
1730628
NSF-PAR ID:
10399618
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
2022 Design, Automation & Test in Europe Conference & Exhibition (DATE)
Page Range / eLocation ID:
184 to 189
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , IEEE Annual International Symposium on Field-Programmable Custom Computing Machines)
    null (Ed.)
    Large Convolutional Neural Networks (CNNs) are often pruned and compressed to reduce the amount of parameters and memory requirement. However, the resulting irregularity in the sparse data makes it difficult for FPGA accelerators that contains systolic arrays of Multiply-and-Accumulate (MAC) units, such as Intel’s FPGA-based Deep Learning Accelerator (DLA), to achieve their maximum potential. Moreover, FPGAs with low-bandwidth off-chip memory could not satisfy the memory bandwidth requirement for sparse matrix computation. In this paper, we present 1) a sparse matrix packing technique that condenses sparse inputs and filters before feeding them into the systolic array of MAC units in the Intel DLA, and 2) a customization of the Intel DLA which allows the FPGA to efficiently utilize a high bandwidth memory (HBM2) integrated in the same package. For end-to-end inference with randomly pruned ResNet-50/MobileNet CNN models, our experiments demonstrate 2.7x/3x performance improvement compared to an FPGA with DDR4, 2.2x/2.1x speedup against a server-class Intel SkyLake CPU, and comparable performance with 1.7x/2x power efficiency gain as compared to an NVidia V100 GPU. 
    more » « less
  2. ; ; ; ( , 2020 IEEE 38th International Conference on Computer Design (ICCD))
    null (Ed.)
    With the growing performance and wide application of deep neural networks (DNNs), recent years have seen enormous efforts on DNN accelerator hardware design for platforms from mobile devices to data centers. The systolic array has been a popular architectural choice for many proposed DNN accelerators with hundreds to thousands of processing elements (PEs) for parallel computing. Systolic array-based DNN accelerators for datacenter applications have high power consumption and nonuniform workload distribution, which makes power delivery network (PDN) design challenging. Server-class multicore processors have benefited from distributed on-chip voltage regulation and heterogeneous voltage regulation (HVR) for improving energy efficiency while guaranteeing power delivery integrity. This paper presents the first work on HVR-based PDN architecture and control for systolic array-based DNN accelerators. We propose to employ a PDN architecture comprising heterogeneous on-chip and off-chip voltage regulators and multiple power domains. By analyzing patterns of typical DNN workloads via a modeling framework, we propose a DNN workload-aware dynamic PDN control policy to maximize system energy efficiency while ensuring power integrity. We demonstrate significant energy efficiency improvements brought by the proposed PDN architecture, dynamic control, and power gating, which lead to a more than five-fold reduction of leakage energy and PDN energy overhead for systolic array DNN accelerators. 
    more » « less
  3. ; ; ; ; ; ( , 2022 IEEE International Solid- State Circuits Conference (ISSCC))
    In-memory-computing (IMC) SRAM architecture has gained significant attention as it achieves high energy efficiency for computing a convolutional neural network (CNN) model [1]. Recent works investigated the use of analog-mixed-signal (AMS) hardware for high area and energy efficiency [2], [3]. However, AMS hardware output is well known to be susceptible to process, voltage, and temperature (PVT) variations, limiting the computing precision and ultimately the inference accuracy of a CNN. We reconfirmed, through the simulation of a capacitor-based IMC SRAM macro that computes a 256D binary dot product, that the AMS computing hardware has a significant root-mean-square error (RMSE) of 22.5% across the worst-case voltage, temperature (Fig. 16.1.1 top left) and 3-sigma process variations (Fig. 16.1.1 top right). On the other hand, we can implement an IMC SRAM macro using robust digital logic [4], which can virtually eliminate the variability issue (Fig. 16.1.1 top). However, digital circuits require more devices than AMS counterparts (e.g., 28 transistors for a mirror full adder [FA]). As a result, a recent digital IMC SRAM shows a lower area efficiency of 6368F2/b (22nm, 4b/4b weight/activation) [5] than the AMS counterpart (1170F2/b, 65nm, 1b/1b) [3]. In light of this, we aim to adopt approximate arithmetic hardware to improve area and power efficiency and present two digital IMC macros (DIMC) with different levels of approximation (Fig. 16.1.1 bottom left). Also, we propose an approximation-aware training algorithm and a number format to minimize inference accuracy degradation induced by approximate hardware (Fig. 16.1.1 bottom right). We prototyped a 28nm test chip: for a 1b/1b CNN model for CIFAR-10 and across 0.5-to-1.1V supply, the DIMC with double-approximate hardware (DIMC-D) achieves 2569F2/b, 932-2219TOPS/W, 475-20032GOPS, and 86.96% accuracy, while for a 4b/1b CNN model, the DIMC with the single-approximate hardware (DIMC-S) achieves 3814F2/b, 458-990TOPS/W 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al ( , Design, Automation & Test in Europe Conference & Exhibition (DATE))
    As the number of weight parameters in deep neural networks (DNNs) continues growing, the demand for ultra-efficient DNN accelerators has motivated research on non-traditional architectures with emerging technologies. Resistive Random-Access Memory (ReRAM) crossbar has been utilized to perform insitu matrix-vector multiplication of DNNs. DNN weight pruning techniques have also been applied to ReRAM-based mixed-signal DNN accelerators, focusing on reducing weight storage and accelerating computation. However, the existing works capture very few peripheral circuits features such as Analog to Digital converters (ADCs) during the neural network design. Unfortunately, ADCs have become the main part of power consumption and area cost of current mixed-signal accelerators, and the large overhead of these peripheral circuits is not solved efficiently. To address this problem, we propose a novel weight pruning framework for ReRAM-based mixed-signal DNN accelerators, named TINYADC, which effectively reduces the required bits for ADC resolution and hence the overall area and power consumption of the accelerator without introducing any computational inaccuracy. Compared to state-of-the-art pruning work on the ImageNet dataset, TINYADC achieves 3.5× and 2.9× power and area reduction, respectively. TINYADC framework optimizes the throughput of state-of-the-art architecture design by 29% and 40% in terms of the throughput per unit of millimeter square and watt (GOPs/s×mm 2 and GOPs/w), respectively. 
    more » « less
  5. ; ; ; ( , 30th USENIX Security Symposium)
    The wide deployment of Deep Neural Networks (DNN) in high-performance cloud computing platforms brought to light multi-tenant cloud field-programmable gate arrays (FPGA) as a popular choice of accelerator to boost performance due to its hardware reprogramming flexibility. Such a multi-tenant FPGA setup for DNN acceleration potentially exposes DNN interference tasks under severe threat from malicious users. This work, to the best of our knowledge, is the first to explore DNN model vulnerabilities in multi-tenant FPGAs. We propose a novel adversarial attack framework: Deep-Dup, in which the adversarial tenant can inject adversarial faults to the DNN model in the victim tenant of FPGA. Specifically, she can aggressively overload the shared power distribution system of FPGA with malicious power-plundering circuits, achieving adversarial weight duplication (AWD) hardware attack that duplicates certain DNN weight packages during data transmission between off-chip memory and on-chip buffer, to hijack the DNN function of the victim tenant. Further, to identify the most vulnerable DNN weight packages for a given malicious objective, we propose a generic vulnerable weight package searching algorithm, called Progressive Differential Evolution Search (P-DES), which is, for the first time, adaptive to both deep learning white-box and black-box attack models. The proposed Deep-Dup is experimentally validated in a developed multi-tenant FPGA prototype, for two popular deep learning applications, i.e., Object Detection and Image Classification. Successful attacks are demonstrated in six popular DNN architectures (e.g., YOLOv2, ResNet-50, MobileNet, etc.) on three datasets (COCO, CIFAR-10, and ImageNet). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email