Forward modeled, balanced cross sections that account for the flexural response to thrust loading and erosional unloading can verify and refine the kinematic sequence of deformation in fold‐thrust belts as well as help assess the validity of a balanced cross section. Results from flexural‐kinematic reconstructions that indicate either the cross section, the kinematic order or both are invalid include: (a) a predicted final topography that is dramatically different from the actual topography; (b) large normal fault or thrust fault bounded synorogenic basins that are not present in the mapped geology; and/or (c) an exhumation history that is not consistent with provenance records in the basin or measured thermochronometers. Where detailed measured foreland basin sections exist, flexural‐kinematic modeling of fold‐thrust belt deformation, including out‐of‐sequence (OOS) faults can predict a foreland basin evolution that can be compared to measured data. The modeling process creates a “pseudostratigraphy” in the modeled foreland. The pseudostratigraphy and predicted provenance of each modeled stratigraphic increment can be directly compared to measured stratigraphic sections. We present a case study using two cross sections through the Himalaya of far western Nepal (Api and Simikot) to assess the validity of the section geometries and the resulting kinematic histories, displacement rates, flexural wave response and predicted provenance for both sections. Insights from combining the flexural‐kinematic models with existing stratigraphic data include: (a) Changing the order of proposed OOS and normal faults to earlier in the evolution of the fold‐thrust belt was necessary to reproduce the foreland provenance data. We argue that OOS thrust and normal faults in the Api section occurred between 11 and 4 Ma. (b) Published shortening estimates for the Simikot cross section are too high (>50 km), resulting in unrealistic shortening rates up to 80 mm/yr between 25 and 20 Ma. (c) Flexural forward models with and without an additional sediment loading modeling step indicate that while sediment loading does not have a measurable effect on the magnitude and location of erosion within the fold‐thrust belt, it does have a small effect on accumulation rates and thus the predicted age of stratigraphic boundaries when compared to measured stratigraphic thicknesses and age. Thickness difference range from 0.2 to 0.5 km and can result in predicted age differences of ca. 1 Ma. Accounting for both flexural isostacy and erosion can eliminate unviable kinematic sequences and when combined with provenance data from measured stratigraphic sections, can provide insight into the order, age and rate of deformation.
- Award ID(s):
- 1655152
- NSF-PAR ID:
- 10402322
- Date Published:
- Journal Name:
- GSA Bulletin
- ISSN:
- 0016-7606
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
null (Ed.)Abstract The high strength of the Tarim Basin (northwestern China) lithosphere, widely regarded as a Precambrian craton, is evidenced by its resistance to Cenozoic deformation in the Himalayan-Tibetan orogen. However, Neoproterozoic suturing and early Paleozoic shortening within the Tarim Basin suggest that its rigidity is a relatively recent phenomenon with unknown cause. We reprocessed high-resolution magnetic data that show a 300–400-km-diameter radial pattern of linear anomalies emanating from a central region characterized by mixed positive-negative anomalies. We suggest that this pattern was generated by the previously hypothesized Permian (ca. 300–270 Ma) plume beneath the Tarim Basin. Constrained by published geochemical and geochronological data from plume-related igneous rocks, we propose that the ∼30 m.y. Permian plume activity resulted in a more viscous, depleted, thicker, dehydrated, and low-density mantle lithosphere. The resulting stronger lithosphere deflected strain from the Cenozoic India-Asia convergence around Tarim Basin, including Pamir overthrusting to the northwest and Altyn Tagh left-slip displacement to the northeast, thus shaping the geometry of the Himalayan-Tibetan orogen.more » « less
-
Abstract Understanding the effects of flat slab subduction on mountain building, arc magmatism, and basin evolution is fundamental to convergent‐margin tectonics, with implications for potential feedbacks among geodynamic, magmatic, and surface processes. New stratigraphic and geochronological constraints on Cenozoic sedimentation and magmatism in the southern Central Andes of Argentina (31°S) reveal shifts in volcanism, foreland/hinterland basin development, sediment accumulation, and provenance as the retroarc region was structurally partitioned during slab flattening. Detrital zircon U‐Pb age distributions from the western (Calingasta basin), central (Talacasto and Albarracín basins), and eastern (Bermejo foreland basin) segments of the retroarc basin system preserve syndepositional volcanism and orogenic unroofing of multiple tectonic provinces. Initial shortening‐related exhumation of the Principal Cordillera at 24–17 Ma was recorded by the accumulation of distal eolian deposits bearing Oligocene–Eocene zircons from the Andean magmatic arc. The Calingasta basin chronicled volcanism and basement shortening in the Frontal Cordillera at ~17–11 Ma, as marked by an upward coarsening succession of fluvial to alluvial fan deposits with a sustained zircon U‐Pb age component that matches pervasive Permian‐Triassic bedrock in the hinterland. An ~450 km eastward inboard sweep of volcanism at 11 Ma coincided with the inception of flat slab subduction, and subsequent thin‐skinned shortening in the Precordillera fold‐thrust belt that exhumed wedge‐top deposits and induced cratonward (eastward) advance of flexural subsidence into the Bermejo foreland basin. This foreland basin was structurally partitioned as basement uplifts of the Sierras Pampeanas transformed a fluvial megafan sediment routing network into smaller isolated alluvial fan systems fed by adjacent basement blocks.
-
The Tibetan Plateau, the largest highland on Earth, formed due to the collision of India-Asia over the past 50−60 m.y., and the evolution of the Tibetan Plateau impacts our knowledge of continental tectonics. Examination of the northernmost margin of the Tibetan Plateau is key to unravelling the deformation mechanisms acting in northern Tibet. The left-slip Altyn Tagh fault system defines the northwest margin of the Tibetan Plateau, separating the Western and Eastern Kunlun Ranges in the southwest. Both Cenozoic and pre-Cenozoic crustal deformation events at this junction between the Altyn Tagh and Kunlun Ranges were responsible for the construction of northwestern Tibet, yet the relative contribution of each phase remains unconstrained. The western domain of the Eastern Kunlun Range is marked by active NE-trending, left-slip deformation of the Altyn Tagh fault and an E-striking Cenozoic thrust system developed in response India-Asia collision. To better constrain the Paleozoic Altyn Tagh and Kunlun orogens and establish the Cenozoic structural framework, we conducted an integrated investigation involving detailed geologic mapping (∼1:50,000 scale), U-Pb zircon geochronology, and synthesis of existing data sets across northwestern Tibet. Our new zircon analyses from Paleoproterozoic−Cretaceous strata constrain stratigraphic age and sediment provenance and highlight Proterozoic−Paleozoic arc activity. We propose a tectonic model for the Neoproterozoic−Mesozoic evolution of northwestern Tibet wherein restoration of an ∼56-km-long balanced cross section across the western domain of the Eastern Kunlun suggests that Cenozoic minimum shortening strain was ∼30% (∼24 km shortening). Field evidence suggests this shortening commenced after ca. 25−20 Ma, which yields an average long-term shortening rate of 1.2−0.9 mm yr−1 and strain rates of 4.7 × 10−16 s−1 to 2.3 × 10−16 s−1. Geometric considerations demonstrate that this contractional deformation did not significantly contribute to left-slip offset on the Altyn Tagh fault, which has ∼10 mm/yr slip rates.more » « less
-
Abstract The Andes of western Argentina record spatiotemporal variations in morphology, basin geometry, and structural style that correspond with changes in crustal inheritance and convergent margin dynamics. Above the modern Pampean flat‐slab subduction segment (27–33°S), retroarc shortening generated a fold‐thrust belt and intraforeland basement uplifts that converge north of ∼29°S, providing opportunities to explore the effects of varied deformation and subduction regimes on synorogenic sedimentation. We integrate new detrital zircon U‐Pb and apatite (U‐Th)/He analyses with sequentially restored, flexurally balanced cross sections and thermokinematic models at ∼28.5–30°S to link deformation with resulting uplift, erosion, and basin accumulation histories. Tectonic subsidence, topographic evolution, and thermochronometric cooling records point to (a) shortening and distal foreland basin accumulation at ∼18–16 Ma, (b) thrust belt migration, changes in sediment provenance, and enhanced flexural subsidence from ∼16 to 9 Ma, (c) intraforeland basement deformation, local flexure, and drainage reorganization at ∼12–7 Ma, and (d) out‐of‐sequence shortening and exhumation of foreland basin fill by ∼8–2 Ma. Thrust belt kinematics and the reactivation of basement heterogeneities strongly controlled tectonic load configurations and subsidence patterns. Geo/thermochronological data and model results resolve increased shortening and combined thrust belt and intraforeland basement loading in response to ridge collision and Neogene shallowing of the subducted oceanic slab. Finally, this study demonstrates the utility of integrated flexural thermokinematic and erosion modeling for evaluating the geometries, rates, and potential drivers of retroarc deformation and foreland basin evolution during changes in subduction.