skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Micromolding of Amphotericin-B-Loaded Methoxyethylene–Maleic Anhydride Copolymer Microneedles
Biocompatible and biodegradable materials have been used for fabricating polymeric microneedles to deliver therapeutic drug molecules through the skin. Microneedles have advantages over other drug delivery methods, such as low manufacturing cost, controlled drug release, and the reduction or absence of pain. The study examined the delivery of amphotericin B, an antifungal agent, using microneedles that were fabricated using a micromolding technique. The microneedle matrix was made from GantrezTM AN-119 BF, a benzene-free methyl vinyl ether/maleic anhydride copolymer. The GantrezTM AN-119 BF was mixed with water; after water evaporation, the polymer exhibited sufficient strength for microneedle fabrication. Molds cured at room temperature remained sharp and straight. SEM images showed straight and sharp needle tips; a confocal microscope was used to determine the height and tip diameter for the microneedles. Nanoindentation was used to obtain the hardness and Young’s modulus values of the polymer. Load–displacement testing was used to assess the failure force of the needles under compressive loading. These two mechanical tests confirmed the mechanical properties of the needles. In vitro studies validated the presence of amphotericin B in the needles and the antifungal properties of the needles. Amphotericin B GantrezTM microneedles fabricated in this study showed appropriate characteristics for clinical translation in terms of mechanical properties, sharpness, and antifungal properties.  more » « less
Award ID(s):
1762202
PAR ID:
10410140
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Pharmaceutics
Volume:
14
Issue:
8
ISSN:
1999-4923
Page Range / eLocation ID:
1551
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Proceedings of the 2021 IISE Annual Conference)
    null (Ed.)
    Microneedles provide a transdermal pathway for drug delivery, cosmetic infusion, vaccine administration, and disease diagnostics. Microneedle fabrication relies on the interplay of several variables which include design parameters, material properties, and processing conditions. In this research, our group explores the effect of design parameters and process variables for laser ablation of microneedles within a Polymethyl methacrylate (PMMA) mold. An Ytterbium laser (200W) was utilized to study the effect of five inputs factors (laser power, pulse width, number of repetitions, laser waveform, and interval time between laser pulses) on two output factors (diameter and height) of the fabricated microneedles. Polydimethylsiloxane (PDMS) polymer was cast within the PMMA microneedle mold. Scanning electron microscopy (SEM) was employed to image topographical features of the microneedles. Further, mechanical testing of the microneedles was conducted to evaluate the buckling load and deformation behavior of the microneedle array. A 20W pulse laser with trapezoidal waveform resulted in optimal microneedle topography with an aspect ratio of 1.2. ANOVA results (α = 0.05) depicted that laser power and number of repetitions were significant factors determining the geometrical features of the microneedle array. This research establishes a framework for the design and manufacturing of customized microneedles for precision medicine. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract Microneedle arrays show many advantages in drug delivery applications due to their convenience and reduced risk of infection. Compared to other microscale manufacturing methods, 3D printing easily overcomes challenges in the fabrication of microneedles with complex geometric shapes and multifunctional performance. However, due to material characteristics and limitations on printing capability, there are still bottlenecks to overcome for 3D printed microneedles to achieve the mechanical performance needed for various clinical applications. The hierarchical structures in limpet teeth, which are extraordinarily strong, result from aligned fibers of mineralized tissue and protein‐based polymer reinforced frameworks. These structures provide design inspiration for mechanically reinforced biomedical microneedles. Here, a bioinspired microneedle array is fabricated using magnetic field‐assisted 3D printing (MF‐3DP). Micro‐bundles of aligned iron oxide nanoparticles (aIOs) are encapsulated by polymer matrix during the printing process. A bioinspired 3D‐printed painless microneedle array is fabricated, and suitability of this microneedle patch for drug delivery during long‐term wear is demonstrated. The results reported here provide insights into how the geometrical morphology of microneedles can be optimized for the painless drug delivery in clinical trials. 
    more » « less
  3. ; ; ; (, Pharmaceutics)
    Microneedle (MN) technology is an optimal choice for the delivery of drugs via the transdermal route, with a minimally invasive procedure. MN applications are varied from drug delivery, cosmetics, tissue engineering, vaccine delivery, and disease diagnostics. The MN is a biomedical device that offers many advantages including but not limited to a painless experience, being time-effective, and real-time sensing. This research implements additive manufacturing (AM) technology to fabricate MN arrays for advanced therapeutic applications. Stereolithography (SLA) was used to fabricate six MN designs with three aspect ratios. The MN array included conical-shaped 100 needles (10 × 10 needle) in each array. The microneedles were characterized using optical and scanning electron microscopy to evaluate the dimensional accuracy. Further, mechanical and insertion tests were performed to analyze the mechanical strength and skin penetration capabilities of the polymeric MN. MNs with higher aspect ratios had higher deformation characteristics suitable for penetration to deeper levels beyond the stratum corneum. MNs with both 0.3 mm and 0.4 mm base diameters displayed consistent force–displacement behavior during a skin-equivalent penetration test. This research establishes guidelines for fabricating polymeric MN for high-accuracy and low-cost 3D printing. 
    more » « less
  4. ; ; ; (, Journal of Pharmacy and Pharmacology)
    Abstract ObjectiveThe objective of the present study was to enhance the bioavailability of cannabidiol (CBD) using 3D Digital Light Processing (DLP)-printed microneedle (MN) transdermal drug delivery system. MethodsCBD MN patch was fabricated and optimized using 3D DLP printing using CBD (8% w/v), Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) (0.49% w/v), distilled water (20% w/v), and poly (ethylene glycol) dimethacrylate 550 (PEGDAMA 550) (up to 100% w/v). CBD MNs were characterized for their morphology, mechanical strength, in vitro release study, ex vivo permeation study, and in vivo pharmacokinetic (PK) profile. Key findingsMicroscopic images showed that sharp CBD MNs with a height of ~800 μm, base diameter of ~250 μm, and tip with a radius of curvature (RoC) of ~15 μm were successfully printed using optimized printing parameters. Mechanical strength studies showed no significant deformation in the morphology of CBD MNs even after applying 0.5N/needle force. Ex vivo permeation study showed significant (P < .0001) permeation of CBD in the receiving media as compared to CBD patch (control). In vivo PK study showed significantly (P < .05) enhanced bioavailability in the case of CBD MN patch as compared to CBD subcutaneous inj. (control). ConclusionOverall, systemic absorption of CBD was significantly enhanced using 3D-printed MN drug delivery system. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Materials)
    Microneedles are highly sought after for medicinal and cosmetic applications. However, the current manufacturing process for microneedles remains complicated, hindering its applicability to a broader variety of applications. As diffraction lithography has been recently reported as a simple method for fabricating solid microneedles, this paper presents the experimental validation of the use of ultraviolet light diffraction to control the liquid-to-solid transition of photosensitive resin to define the microneedle shape. The shapes of the resultant microneedles were investigated utilizing the primary experimental parameters including the photopattern size, ultraviolet light intensity, and the exposure time. Our fabrication results indicated that the fabricated microneedles became taller and larger in general when the experimental parameters were increased. Additionally, our investigation revealed four unique crosslinked resin morphologies during the first growth of the microneedle: microlens, first harmonic, first bell-tip, and second harmonic shapes. Additionally, by tilting the light exposure direction, a novel inclined microneedle array was fabricated for the first time. The fabricated microneedles were characterized with skin insertion and force-displacement tests. This experimental study enables the shapes and mechanical properties of the microneedles to be predicted in advance for mass production and wide practical use for biomedical or cosmetic applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email