An official website of the United States government
With the recent emergence of highly transmissible variants of the novel coronavirus SARS-CoV-2, the demand for N95 respirators is expected to remain high. The extensive use of N95 respirators by the public is susceptible to demand‐supply gaps and raises concern about their disposal, threatening the environment with a new kind of plastic pollution. Herein, we investigated the filtration performance of the N95 respirator by specifically analyzing the structure in the key filtration layers of meltblown nonwoven after decontamination with one and five cycles of liquid hydrogen peroxide, ultraviolet radiation, moist heat, and aqueous soap solution treatments. With the aid of X-ray microcomputed tomography (microCT) analysis, the local structural heterogeneity of the meltblown nonwoven has been unfolded and subsequently correlated with their filtration performance at a face velocity that matched with speaking conditions (∼3.89 m/s). The filtration efficiency results of the N95 respirator remain unaltered after performing one cycle of treatment modalities (except autoclave).
more »
« less
Cloth Face Coverings: Effect of Decontamination Method on Fabric Performance
Various textiles have previously been evaluated for use in cloth face masks as a reusable option to help control the spread of respiratory viruses, but only their initial performance was tested. In this study, a broad range of fabrics (3 knit, 7 woven, and 3 nonwoven) were characterized for filtration efficiency (FE) and air permeability (AP) before and after 40 decontamination cycles by home laundry, microwave-generated steam, or dishwasher sterilization. AP was quantified following ASTM D737, and FE was assessed using NaCl aerosol in a simulated breathing system. While most fabrics maintained or improved their FE after 40 decontamination cycles, the AP of many fabrics decreased due to detergent buildup, fiber breakage, and fabric shrinkage. Tightly woven cotton fabrics had unacceptably low AP and FE performance. Knit and nonwoven structures had the best balance of properties, and although they are not recommended for use in single-layer masks, they have potential use in multilayer masks.
more »
« less
- Award ID(s):
- 1719875
- PAR ID:
- 10411492
- Date Published:
- Journal Name:
- AATCC Journal of Research
- Volume:
- 10
- Issue:
- 1
- ISSN:
- 2472-3444
- Page Range / eLocation ID:
- 18 to 27
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Filtering facepiece respirators (FFRs) provide effective protection against diseases spread through airborne infectious droplets and particles. The widespread use of FFRs during the COVID-19 pandemic has not only led to supply shortages, but the disposal of single-use facemasks also threatens the environment with a new kind of plastic pollution. While limited reuse of filtering facepiece respirators has been permitted as a crisis capacity strategy, there are currently no standard test methods available for decontamination before their repeated use. The decontamination of respirators can compromise the structural and functional integrity by reducing the filtration efficiency and breathability. Digital segmentation of X-ray microcomputed tomography (microCT) scans of the meltblown nonwoven layers of a specific N95 respirator model (Venus-4400) after treatment with one and five cycles of liquid hydrogen peroxide, ultraviolet radiation, moist heat, and aqueous soap solution enabled us to perform filtration simulations of decontaminated respirators. The computed filtration efficiencies for 0.3 µm particles agreed well with experimental measurements, and the distribution of particle penetration depths was correlated with the structural changes resulting from decontamination. The combination of X-ray microCT imaging with numerical simulations thus provides a strategy for quantitative evaluation of the effectiveness of decontamination treatments for a specific respirator model.more » « less
-
null (Ed.)Abstract Decontamination of N95 respirators is being used by clinicians in the face of a global shortage of these devices. Some treatments for decontamination, such as some vaporized hydrogen peroxide methods or ultraviolet methods, had no impact on respiratory performance, while other treatments resulted in substantial damage to masks.more » « less
-
Driving evaluations aim to ensure adequate skills; however, feedback beyond pass/fail is needed for improvement. Therefore, the goal of this study was to inform driving feedback report design to ensure ease of use and understandability while motivating improvements. Participants ages 18–25 years (n = 521) were recruited from CloudResearch Prime Panels to rate one of nine report design conditions with various combinations of five key features: performance summary presence, action plan (AP) length, AP order, AP grading system, and peer comparison presence; they then completed questionnaires. Participants were more motivated to improve when a summary was present (p = 0.02); they rated reports easier to use if they had a long AP (p = 0.01), a short AP paired with a summary (p = 0.007), or an AP with a number grade (p = 0.016); and they rated reports easier to understand if they had a short AP (p = 0.002) or an AP ordered by worst-to-best performance (p = 0.05). These results suggest that feedback reports designed with a performance summary and short, targeted action plan starting with the biggest area for improvement are likely to motivate action to improve driving skills while being easy to use and understand. Future research should evaluate the effect of such a redesigned report on driving outcomes among young drivers.more » « less
-
null (Ed.)The US CDC has recognized moist-heat as one of the most effective and accessible methods of decontaminating N95 masks for reuse in response to the persistent N95 mask shortages caused by the COVID-19 pandemic. However, it is challenging to reliably deploy this technique in healthcare settings due to a lack of smart technologies capable of ensuring proper decontamination conditions of hundreds of masks simultaneously. To tackle these challenges, we developed an open-source wireless sensor platform---VeriMask1 ---that facilitates per-mask verification of the moist-heat decontamination process. VeriMask is capable of monitoring hundreds of masks simultaneously in commercially available heating systems and provides a novel throughput-maximization functionality to help operators optimize the decontamination settings. We evaluate VeriMask in laboratory and real-scenario clinical settings and find that it effectively detects decontamination failures and operator errors in multiple settings and increases the mask decontamination throughput. Our easy-to-use, low-power, low-cost, scalable platform integrates with existing hospital protocols and equipment, and can be broadly deployed in under-resourced facilities to protect front-line healthcare workers by lowering their risk of infection from reused N95 masks. We also memorialize the design challenges, guidelines, and lessons learned from developing and deploying VeriMask during the COVID-19 Pandemic. Our hope is that by reflecting and reporting on this design experience, technologists and front-line health workers will be better prepared to collaborate for future pandemics, regarding mask decontamination, but also other forms of crisis tech.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1177/24723444221132051
