Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 5:00 PM ET until 8:00 PM ET on Friday, September 11 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Simultaneous enhancement of near infrared luminescence and stability of Cs 2 AgInCl 6 :Cr 3+ double perovskite single crystals enabled by a Yb 3+ dopant
Title: Simultaneous enhancement of near infrared luminescence and stability of Cs 2 AgInCl 6 :Cr 3+ double perovskite single crystals enabled by a Yb 3+ dopant
Broadband near infrared (NIR) emission materials are of interest for various applications including non-destructive biomedical imaging. In this work, ytterbium ions (Yb 3+ ) were successfully doped into Cs 2 AgInCl 6 :Cr 3+ (CAIC:Cr 3+ ) double perovskite single crystals (DPSCs) by a facile hydrothermal method. Under 365 nm excitation, the co-doped CAIC:Cr 3+ ,Yb 3+ DPSCs showed broad NIR emission ranging from 800 to 1400 nm, which spanned the NIR-I (700–900 nm) and NIR-II (1000–1700 nm) bio-windows, with an emission band at 1000 nm and a full-width at half maximum (FWHM) of 188 nm. It is found that Yb 3+ ion doping could effectively improve the photoluminescence (PL) performance of CAIC:Cr 3+ DPSCs. Compared to the photoluminescence quantum yield (PLQY) of 22.5% for the single doped CAIC:Cr 3+ , the co-doped CAIC:Cr 3+ ,Yb 3+ DPSCs show a higher PLQY of ∼45%, which is attributed to the synergistic effect of reduced non-radiative recombination due to defect passivation and increase in crystallinity, and energy transfer (ET) of self-trapped excitons (STEs) to Cr 3+ . As a demonstration of applications, NIR pc-LEDs were fabricated by combining the as-synthesized NIR-emitting phosphor CAIC:Cr 3+ ,Yb 3+ with InGaN UV chips ( λ em = 365 nm) and used to image veins in a palm and for night vision using a NIR camera. The results suggest that the synthesized CAIC:Cr 3+ ,Yb 3+ DPSCs have great potential in biological applications.  more » « less
Award ID(s):
1904547
PAR ID:
10411942
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Inorganic Chemistry Frontiers
Volume:
9
Issue:
18
ISSN:
2052-1553
Page Range / eLocation ID:
4695 to 4704
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Journal of Materials Chemistry C)
    Mn2+/Cr3+codoped Cs2AgInCl6double perovskite were synthesizedviaa facile hydrothermal method, which exhibits two photoluminescence bands with a wide emission switch ranging from orange to NIR and the photoluminescence quantum yield of 49.3%. 
    more » « less
  2. ; ; (, Energy & Environmental Science)
    Yb 3+ -Doped lead-halide perovskites (Yb 3+ :CsPb(Cl 1−x Br x ) 3 ) have emerged as unique materials combining strong, tunable broadband absorption with near-infrared photoluminescence quantum yields (PLQYs) approaching 200% at ambient temperature. These remarkable properties make Yb 3+ :CsPb(Cl 1−x Br x ) 3 an extremely promising candidate for spectral shaping in high-efficiency photovoltaic devices. Previous theoretical assessments of such “downconversion” devices have predicted single-junction efficiencies up to 40%, but have been highly idealized. Real materials like Yb 3+ :CsPb(Cl 1−x Br x ) 3 have practical limitations such as constrained band-gap and PL energies, non-directional emission, and an excitation-power-dependent PLQY. Hence, it is unclear whether Yb 3+ :CsPb(Cl 1−x Br x ) 3 , or any other non-ideal quantum-cutting material, can indeed boost the efficiencies of real high-performance PV. Here, we examine the thermodynamic, detailed-balance efficiency limit of Yb 3+ :CsPb(Cl 1−x Br x ) 3 on different existing PV under real-world conditions. Among these, we identify silicon heterojunction technology as very promising for achieving significant performance gains when paired with Yb 3+ :CsPb(Cl 1−x Br x ) 3 , and we predict power-conversion efficiencies of up to 32% for this combination. Surprisingly, PL saturation does not negate the improved device performance. Calculations accounting for actual hourly incident solar photon fluxes show that Yb 3+ :CsPb(Cl 1−x Br x ) 3 boosts power-conversion efficiencies at all times of day and year in two representative geographic locations. Predicted annual energy yields are comparable to those of tandem perovskite-on-silicon technologies, but without the need for current matching, tracking, or additional electrodes and inverters. In addition, we show that band-gap optimization in real quantum cutters is inherently a function of their PLQY and the ability to capture that PL. These results provide key design rules needed for development of high-efficiency quantum-cutting photovoltaic devices based on Yb 3+ :CsPb(Cl 1−x Br x ) 3 . 
    more » « less
  3. ; ; ; (, Journal of the American Ceramic Society)
    ABSTRACT Rare earth ion doped Zn2P2O7phosphor was synthesized via a solid‑state reaction route. XRD measurements confirmed the formation of a single‑phase Zn2P2O7lattice. Sensitization of Er3+(4I13/2→4I15/2) near‑infrared emission by Yb3+ions via an energy transfer process under 980 nm excitation is discussed. Energy transfer upconversion (ETU) was also investigated in Er3+and Er3+/Yb3+co‑doped Zn2P2O7phosphors. Intense upconversion (UC) emissions were observed from Er3+in the green (520–570 nm) and red (640–680 nm) regions under 980 nm diode laser excitation. Fluorescence intensity ratio (FIR)‐based thermometry was explored using both thermally coupled levels (TCL) and non‑thermally coupled levels (NTCL). The material exhibits a consistent temperature‑dependent luminescence response with high relative sensitivity (SR) over the investigated temperature range. The experimentally determined temperature resolution reaches 1 K at room temperature and 2.1 K at 390 K under practical measurement conditions, demonstrating reliable thermometric performance over a wide temperature range. These results provide critical insights into temperature‐dependent luminescence characteristics and establish Zn2P2O7:Er3+,Yb3+as a promising candidate for the next‐generation photonic and sensors applications. 
    more » « less
  4. ; ; ; (, Dalton Transactions)
    An efficient broadband NIR garnet-type Mg3Gd2Ge3O12:Cr3+phosphor with relatively long emission wavelength was developed, which demonstrates an excellent performance in NIR pc-LED applications. 
    more » « less
  5. ; ; ; (, ChemNanoMat)
    Mn2+doping of CsPbBr3perovskite magic‐sized clusters (PMSCs) has been reported previously, where PMSCs with first excitonic absorption and photoluminescence (PL) around 425 nm were reported originally, followed by Mn2+‐doped PMSCs with host absorption and PL around 400 nm. There, the observed 25 nm blueshift was attributed to smaller PMSCs or the Cl−ions introduced by MnCl2as dopant precursor. However, subsequent studies suggest that the 400 nm band may instead be due to ligand‐assisted metal halide molecular clusters (MHMCs), which lack the A component of perovskite. This raises the question whether the originally claimed Mn2+‐doped PMSCs are actually MHMCs. To unambiguously address this issue, Mn2+‐doped CH3NH3PbBr3PMSCs were synthesized with PL at both 440 nm, attributed to the PMSC, and at 600 nm, attributed to Mn2+. Blueshifting of the host absorption and PL bands due to Cl−codoping is avoided by selecting MnBr2as dopant precursor rather than MnCl2. Dopant incorporation into PMSCs is further supported by PL excitation, time‐resolved PL, and electron paramagnetic resonance studies. This work provides direct and strong evidence of successful Mn2+doping in PMSCs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email