An official website of the United States government
ABSTRACT Lantern bugs are amongst the largest of the jumping hemipteran bugs, with body lengths reaching 44 mm and masses reaching 0.7 g. They are up to 600 times heavier than smaller hemipterans that jump powerfully using catapult mechanisms to store energy. Does a similar mechanism also propel jumping in these much larger insects? The jumping performance of two species of lantern bugs (Hemiptera, Auchenorrhyncha, family Fulgoridae) from India and Malaysia was therefore analysed from high-speed videos. The kinematics showed that jumps were propelled by rapid and synchronous movements of both hind legs, with their trochantera moving first. The hind legs were 20–40% longer than the front legs, which was attributable to longer tibiae. It took 5–6 ms to accelerate to take-off velocities reaching 4.65 m s−1 in the best jumps by female Kalidasa lanata. During these jumps, adults experienced an acceleration of 77 g, required an energy expenditure of 4800 μJ and a power output of 900 mW, and exerted a force of 400 mN. The required power output of the thoracic jumping muscles was 21,000 W kg−1, 40 times greater than the maximum active contractile limit of muscle. Such a jumping performance therefore required a power amplification mechanism with energy storage in advance of the movement, as in their smaller relatives. These large lantern bugs are near isometrically scaled-up versions of their smaller relatives, still achieve comparable, if not higher, take-off velocities, and outperform other large jumping insects such as grasshoppers.
more »
« less
Insect-scale jumping robots enabled by a dynamic buckling cascade
Millions of years of evolution have allowed animals to develop unusual locomotion capabilities. A striking example is the legless-jumping of click beetles and trap-jaw ants, which jump more than 10 times their body length. Their delicate musculoskeletal system amplifies their muscles’ power. It is challenging to engineer insect-scale jumpers that use onboard actuators for both elastic energy storage and power amplification. Typical jumpers require a combination of at least two actuator mechanisms for elastic energy storage and jump triggering, leading to complex designs having many parts. Here, we report the new concept of dynamic buckling cascading, in which a single unidirectional actuation stroke drives an elastic beam through a sequence of energy-storing buckling modes automatically followed by spontaneous impulsive snapping at a critical triggering threshold. Integrating this cascade in a robot enables jumping with unidirectional muscles and power amplification (JUMPA). These JUMPA systems use a single lightweight mechanism for energy storage and release with a mass of 1.6 g and 2 cm length and jump up to 0.9 m, 40 times their body length. They jump repeatedly by reengaging the latch and using coiled artificial muscles to restore elastic energy. The robots reach their performance limits guided by theoretical analysis of snap-through and momentum exchange during ground collision. These jumpers reach the energy densities typical of the best macroscale jumping robots, while also matching the rapid escape times of jumping insects, thus demonstrating the path toward future applications including proximity sensing, inspection, and search and rescue.
more »
« less
- Award ID(s):
- 2219644
- PAR ID:
- 10417341
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 120
- Issue:
- 5
- ISSN:
- 0027-8424
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Entomopathogenic nematodes (EPNs) exhibit a bending-elastic instability, or kink, before becoming airborne, a feature hypothesized but not proven to enhance jumping performance. Here, we provide the evidence that this kink is crucial for improving launch performance. We demonstrate that EPNs actively modulate their aspect ratio, forming a liquid-latched closed loop over a slow timescaleO(1 s), then rapidly open itO(10 µs), achieving heights of 20 body lengths (BL) and generating ∼ 104W/Kg of power. Using jumping nematodes, a bio-inspired Soft Jumping Model (SoftJM), and computational simulations, we explore the mechanisms and implications of this kink. EPNs control their takeoff direction by adjusting their head position and center of mass, a mechanism verified through phase maps of jump directions in simulations and SoftJM experiments. Our findings reveal that the reversible kink instability at the point of highest curvature on the ventral side enhances energy storage using the nematode’s limited muscular force. We investigated the impact of aspect ratio on kink instability and jumping performance using SoftJM, and quantified EPN cuticle stiffness with AFM, comparing it withC. elegans. This led to a stiffness-modified SoftJM design with a carbon fiber backbone, achieving jumps of ∼25 BL. Our study reveals how harnessing kink instabilities, a typical failure mode, enables bidirectional jumps in soft robots on complex substrates like sand, offering a novel approach for designing limbless robots for controlled jumping, locomotion, and even planetary exploration.more » « less
-
Entomopathogenic nematodes (EPNs) exhibit a bending-elastic instability, or kink, before becoming airborne, a feature previously hypothesized but not substantiated to enhance jumping performance. Here, we provide the evidence that this kink is crucial for improving launch performance. We demonstrate that EPNs actively modulate their aspect ratio, forming a liquid-latched α-shaped loop over a slow timescale (1 second), and then rapidly open it (10 microseconds), achieving heights of 20 body lengths and generating power of ∼104watts per kilogram. Using a bioinspired physical model [termed the soft jumping model (SoftJM)], we explored the mechanisms and implications of this kink. EPNs control their takeoff direction by adjusting their head position and center of mass, a mechanism verified through phase maps of jump directions in numerical simulations and SoftJM experiments. Our findings reveal that the reversible kink instability at the point of highest curvature on the ventral side enhances energy storage using the nematode’s limited muscular force. We investigated the effect of the aspect ratio on kink instability and jumping performance using SoftJM and quantified EPN cuticle stiffness with atomic force microscopy measurements, comparing these findings with those ofCaenorhabditis elegans. This investigation led to a stiffness-modified SoftJM design with a carbon fiber backbone, achieving jumps of ∼25 body lengths. Our study reveals how harnessing kink instabilities, a typical failure mode, enables bidirectional jumping in soft robots on complex substrates like sand, offering an approach for designing limbless robots for controlled jumping, locomotion, and even planetary exploration.more » « less
-
In nature, click-beetles use a unique hinge structure between their prothorax and mesothorax that acts as a latch-mediated spring actuation system to produce a high acceleration that can result in a jump. This mechanism enables them to jump a height of several times their body length without using their legs when the beetle is unconstrained. To study the beetle jump trajectory, we designed simplified beetle-inspired prototypes and a launching platform. The simplified prototypes are fundamentally two masses connected by a spring. The masses simulate the portion of a click beetle’s body located anteriorly (M1) and posteriorly (M2) to the clicking mechanism, and the spring simulates the elastic energy storage element. The launcher uses a quick-reaction release mechanism and magnetic actuator to simulate the unlatching process. In trajectory analysis, the parameters that are most important are initial velocity at take-off and the take-off angle since both the click beetles and the prototypes are governed by ballistic motion. We determined that morphological features such as elytra (body) curvature and the ratio of the two body masses affect these two dynamic parameters. Our findings provide further insight into the design and fabrication of legless jumping robotic mechanisms and apply engineering models and experimental tools to answer key biological questions.more » « less
-
ABSTRACT Escape responses are vital for the survival of prey. The high speeds and accelerations needed to evade predators successfully require exerting forces on the environment. Unlike water, terrestrial habitats can vary in ways that constrain the forces applied, requiring animals to adjust their behavior in response to variable conditions. We evaluated the terrestrial jumping of an amphibious fish, the blackspotted rockskipper (Entomacrodus striatus), to determine if substrate roughness and wetness influence jumping performance. We predicted that rockskippers would produce a greater force output as substrate roughness increased and wetness decreased. Using a novel waterproof force plate capable of detecting millinewton loads, we collected ground reaction forces from rockskippers jumping on wet and dry sandpapers of varying grits. We also used micro‐CT scans to quantify muscle mass as a relative fraction of body mass to determine if these jumps could be performed without power amplification. Mixed‐model analysis of jumps revealed significantly higher maximum horizontal forces, jump duration, and maximum power on dry versus wet substrates, but no effect of substrate roughness. However, the final jump outcomes (takeoff speed and angle) were unaffected. Peak jump power was within the range of typical fish muscle. Thus, these fish display a jumping behavior which is robust to substrate property variation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1073/pnas.2210651120
