An official website of the United States government
Effect of Wrapping Force on the Effective Elastic Behavior of Packed Cylinders
Abstract When cylinders are packed and wrapped by the bands around the surface, the effective elastic behavior in the cross section of the assembly, which is of significance to its stability and integrity, can be controlled by the wrapping force in the band. The wrapping force is transferred to the cylinders through the Hertz contact between each pair of neighboring cylinders, which is validated by the experiments. The Singum model is introduced to study the mechanical behaviors of the packed cylinders with two-dimensional (2D) packing lattices, in which an inner cylinder is simulated by a continuum particle of Singum and the inter-cylinder force is governed by the Hertz contact model so as to derive the effective stress-strain relationship. The wrapping force will produce configurational forces given a displacement variation, which significantly changes the effective stiffness of the packed cylinders. The hexagonal packing exhibits isotropic elasticity whereas the square packing is anisotropic. The efficacy of our model is demonstrated by comparing the closed form elasticity against the numerical simulation and the previous models. The explicit form of elasticity can be used for packing design and quality control of cable construction and installation.
more »
« less
- PAR ID:
- 10418007
- Date Published:
- Journal Name:
- Journal of Applied Mechanics
- Volume:
- 90
- Issue:
- 3
- ISSN:
- 0021-8936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
The adhesion of nanoparticles to lipid vesicles causes curvature deformations to the membrane to an extent determined by the competition between the adhesive interaction and the membrane’s elasticity. These deformations can extend over length scales larger than the size of a nanoparticle, leading to an effective membrane-curvature-mediated interaction between nanoparticles. Nanoparticles with uniform surfaces tend to aggregate into unidimensionally close-packed clusters at moderate adhesion strengths and endocytose at high adhesion strengths. Here, we show that the suppression of close-packed clustering and endocytosis can be achieved by the surface modification of the nanoparticles into Janus particles where a moiety of their surface is grafted with polymers under a good solvent condition. The osmotic pressure of the polymer brushes prevents membrane wrapping of the nanoparticles’ moieties that are grafted with polymers, thus suppressing their endocytosis. Furthermore, a repulsion between polymer brushes belonging to two nearby nanoparticles destabilizes the dimerization of the nanoparticles over a wide range of values of the polymers’ molecular weight and grafting density. This surface modification of nanoparticles should allow for reliable, non-close-packed, and tunable self-assemblies of nanoparticles.more » « less
-
We propose a class of diatomic 2-D soft granular crystals, which features pattern transformation under compression with lateral confinement. The proposed granular crystals are composed of two different types of cylinders: large soft cylinders and small hard cylinders. The pattern-transformable granular crystals are obtained by exploring perturbed packing patterns as potential configurations, and compression with lateral confinement as the driving force of the transition. As a demonstration of the proof-of-concept, we first show the results of desktop-scaled experiments and finite element simulations for a representative case. Then, we present the procedure to obtain these new pattern transformations in soft granular crystals based on the compact packing theory of diatomic circles. The scale-independent compact packing theory serves as an important part of the veiled underlying mechanism of the observed pattern transformations, so the proposed granular crystals can open new avenues in the microstructural design of functional materials towards practical applications.more » « less
-
null (Ed.)We study the wetting of a thin elastic filament floating on a fluid surface by a droplet of another, immiscible fluid. This quasi-2D experimental system is the lower-dimensional counterpart of the wetting and wrapping of a droplet by an elastic sheet. The simplicity of this system allows us to study the phenomenology of partial wetting and wrapping of the droplet by measuring angles of contact as a function of the elasticity of the filament, the applied tension and the curvature of the droplet. We find that a purely geometric theory gives a good description of the mechanical equilibria in the system. The estimates of applied tension and tension in the filament obey an elastic version of the Young–Laplace–Dupré relation. However, curvatures close to the contact line are not captured by the geometric theory, possibly because of 3D effects at the contact line. We also find that when a highly-bendable filament completely wraps the droplet, there is continuity of curvature at the droplet-filament interface, leading to seamless wrapping as observed in a 3D droplet.more » « less
-
This paper describes the numerical study of oscillating circular cylinders with rigid splitter plates of different lengths. These geometries may be used as disturbance generators for the study of unsteady airfoils and wings operating in highly vortical flowfields. It has been shown that cylinders undergoing forced rotational oscillations at their natural shedding frequency can produce wakes with minimal deviation in cycle-to-cycle vortex strength and position. Adding a splitter plate allows these deviations to be reduced even further. We present cases for oscillating cylinders having splitter-plate lengths up to [Formula: see text] at a Reynolds number of 7600. Frequencies are maintained at the natural shedding frequency, and a rotational amplitude of 45 deg is used. Numerical simulations are performed using a two-dimensional unsteady Reynolds-averaged Navier–Stokes (RANS) code. Results are presented in the form of vorticity contours and cycle-averaged velocity profiles, as well as the dominant frequencies of cylinder lift force and downstream velocity angles. The results show that splitter-plate lengths shorter than [Formula: see text] adversely affect the ability to generate a coherent vortex wake due to shear layer roll-up near the trailing edge of the plate. Splitter plates longer than [Formula: see text] produced a reverse von Kármán wake with consistent cycle-to-cycle vortex shedding.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4056212
