skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Significance of Short‐Wavelength Magnetic Anomaly Low Along the East Pacific Rise Axis, 9°50′N
Abstract Magnetic anomaly variations near mid‐ocean ridge spreading centers are sensitive to a variety of crustal accretionary processes as well as geomagnetic field variations when the crust forms. We collected near‐bottom vector magnetic anomaly data during a series of 21 autonomous underwater vehicleSentrydives near 9°50′N on the East Pacific Rise (EPR) covering ∼26 km along‐axis. These data document the 2–3 km wide axial anomaly high that is commonly observed at fast‐spreading ridges but also reveal the presence of a superimposed ∼800 m full wavelength anomaly low. The anomaly low is continuous for ≥13 km along axis and may extend over the entire survey region. A more detailed survey of hydrothermal vents near 9°50.3′N reveals ∼100 m diameter magnetic lows, which are misaligned relative to active vents and therefore cannot explain the continuous axial low. The axial magnetization low persists in magnetic inversions with variable extrusive source thickness, indicating that to the extent to which layer 2A constitutes the sole magnetic source, variations in its thickness alone cannot account for the axial low. Lava accumulation models illustrate that high geomagnetic intensity over the past ∼2.5 kyr, and decreasing intensity over the past ∼900 years, are both consistent with the broad axial anomaly high and the superimposed shorter wavelength low. The continuity of this axial low, and similar features elsewhere on the EPR suggests, that either crustal accretionary processes responsible for this anomaly are common among fast‐spread ridges, or that the observed magnetization low may partially reflect global geomagnetic intensity fluctuations.  more » « less
Award ID(s):
2128301 1948936 1949485 1949938
PAR ID:
10419918
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Geochemistry, Geophysics, Geosystems
Volume:
24
Issue:
5
ISSN:
1525-2027
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Journal of Geophysical Research: Solid Earth)
    Abstract Observed variations in across‐axis topographic relief and faulting style at spreading centers have been challenging to explain. Axial highs are seen at fast‐spreading centers, while valleys occur for slow‐spreading centers. Fault offsets range from tens of meters at fast‐spreading ridges to tens of kilometers at some slow‐spreading ridges. Models that fit the axial relief fail to produce observed fault patterns, while models that fit the fault patterns fail to produce observed variations in axial relief. A recent mechanical analysis (Liu & Buck, 2018,https://doi.org/10.1016/j.epsl.2018.03.045) suggests that including the effect of many discrete diking events can result in a gradual change in axial relief with crustal thicknesses. To compare this mechanical model directly with observations requires us to couple it with a two‐dimensional thermal model. This allows us to estimate the axial lithospheric thickness consistently as a function of the spreading rate and crustal thickness. For thinner axial lithosphere the model predicts an axial high with relief supported by low‐density material beneath the axial lithosphere. For axial lithospheric thickness between approximately one half and approximately three fourths of the crustal thickness, the axial depth decreases with magma supply increase. For thicker axial lithosphere the axial valley relief is controlled by axial brittle lithospheric thickness and near‐axis lithospheric geometry. We compared model predictions to data by compiling observations on axial relief and faulting mode for all spreading centers where seismic crustal thickness has been measured. Good fit to the data is obtained for model parameters giving dike widths in the axial lithosphere close to a meter. 
    more » « less
  2. ; ; ; ; ; (, Geochemistry, Geophysics, Geosystems)
    Abstract Fissures and faults provide insight into how plate separation is accommodated by magmatism and brittle deformation during crustal accretion. Although fissure and fault geometry can be used to quantify the spreading process at mid‐ocean ridges, accurate measurements are rare due to insufficiently detailed mapping data. Here, fissures and faults at the fast‐spreading 9°50′N segment of the East Pacific Rise were mapped using bathymetric data collected at 1‐m horizontal resolution by autonomous underwater vehicleSentry. Fault dip estimates from the bathymetric data were calibrated using co‐registered near‐bottom imagery and depth transects acquired by remotely operated vehicleJason. Fissures are classified as either eruptive or non‐eruptive (i.e., cracks). Tectonic strain estimated from corrected fault heaves suggests that faulting plays a negligible role in the plate separation on crust younger than 72 kyr (<4 km from the ridge axis). Pre‐ and post‐eruption surveys show that most fissures were reactivated during the eruptions in 2005–2006. Variable eruptive fissure geometry could be explained by the frequency with which each fissure is reactivated and partially infilled. Fissure swarms and lava plateaus in low‐relief areas >2 km from the ridge are spatially associated with off‐axis lower‐crustal magma lenses identified in multichannel seismic data. Deep, closely spaced fissures overlie a relatively shallow portion of the axial magma lens. The width of on‐axis fissures and inferred subsurface dike geometry imply a ∼9‐year long diking recurrence interval to fully accommodate plate spreading, which is broadly consistent with cycle intervals obtained from estimates of melt extraction rates, eruption volumes, and spreading rate. 
    more » « less
  3. ; ; ; ; ; ; (, Geochemistry, Geophysics, Geosystems)
    Abstract Volcanic seamount chains on the flanks of mid‐ocean ridges record variability in magmatic processes associated with mantle melting over several millions of years. However, the relative timing of magmatism on individual seamounts along a chain can be difficult to estimate withoutin situsampling and is further hampered by Ar40/Ar39dating limitations. The 8°20’N seamount chain extends ∼170 km west from the fast‐spreading East Pacific Rise (EPR), north of and parallel to the western Siqueiros fracture zone. Here, we use multibeam bathymetric data to investigate relationships between abyssal hill formation and seamount volcanism, transform fault slip, and tectonic rotation. Near‐bottom compressed high‐intensity radiated pulse, bathymetric, and sidescan sonar data collected with the autonomous underwater vehicleSentryare used to test the hypothesis that seamount volcanism is age‐progressive along the seamount chain. Although sediment on seamount flanks is likely to be reworked by gravitational mass‐wasting and current activity, bathymetric relief andSentryvehicle heading analysis suggest that sedimentary accumulations on seamount summits are likely to be relatively pristine. Sediment thickness on the seamounts' summits does not increase linearly with nominal crustal age, as would be predicted if seamounts were constructed proximal to the EPR axis and then aged as the lithosphere cooled and subsided away from the ridge. The thickest sediments are found at the center of the chain, implying the most ancient volcanism there, rather than on seamounts furthest from the EPR. The nonlinear sediment thickness along the 8°20’N seamounts suggests that volcanism can persist off‐axis for several million years. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the National Academy of Sciences)
    Comprehensive knowledge of the distribution of active hydrothermal vent fields along midocean ridges is essential to understanding global chemical and heat fluxes and endemic faunal distributions. However, current knowledge is biased by a historical preference for on-axis surveys. A scarcity of high-resolution bathymetric surveys in off-axis regions limits vent identification, which implies that the number of vents may be underestimated. Here, we present the discovery of an active, high-temperature, off-axis hydrothermal field on a fast-spreading ridge. The vent field is located 750 m east of the East Pacific Rise axis and ∼7 km north of on-axis vents at 9° 50′N, which are situated in a 50- to 100-m-wide trough. This site is currently the largest vent field known on the East Pacific Rise between 9 and 10° N. Its proximity to a normal fault suggests that hydrothermal fluid pathways are tectonically controlled. Geochemical evidence reveals deep fluid circulation to depths only 160 m above the axial magma lens. Relative to on-axis vents at 9° 50′N, these off-axis fluids attain higher temperatures and pressures. This tectonically controlled vent field may therefore exhibit greater stability in fluid composition, in contrast to more dynamic, dike-controlled, on-axis vents. The location of this site indicates that high-temperature convective circulation cells extend to greater distances off axis than previously realized. Thorough high-resolution mapping is necessary to understand the distribution, frequency, and physical controls on active off-axis vent fields so that their contribution to global heat and chemical fluxes and role in metacommunity dynamics can be determined. 
    more » « less
  5. ; ; ; ; (, Proceedings of the National Academy of Sciences)
    At fast-spreading centers, faults develop within the axial summit trough (AST; 0 to 250 m around the axis) primarily by diking-induced deformation originating from the axial magma lens (AML). The formation of the prominent abyssal-hill-bounding faults beyond the axial high (>2,000 m) is typically associated with the unbending of the lithosphere as it cools and spreads away from the AST. The presence of faults is rarely mapped between these two thermally distinct zones, where the lithosphere is still too hot for the faults to be linked with the process of thermal cooling and outside of the AST where the accretional diking process dominates the ridge axis. Here, we reveal a remarkable vertical alignment between the distinct morphological features of the magma body and the orientation of these faults, by comparison of 3-D seismic imagery and bathymetry data collected at the East Pacific Rise (EPR) 9°50’N. The spatial coincidence and asymmetric nucleation mode of the mapped faults represent the most direct evidence for magmatically induced faulting near the ridge axis, providing pathways for hydrothermalism and magma emplacement, helping to build the crust outside of the AST. The high-resolution seafloor and subsurface images also enable revised tectonic strain estimates, which shows that the near-axis tectonic component of seafloor spreading at the EPR is an order of magnitude smaller than previously thought with close to negligible contribution of lava buried faults to spreading. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email