More Like this

1. ∼8.5 μ m-emitting InP-based quantum cascade lasers grown on GaAs by metal-organic chemical vapor deposition

   https://doi.org/10.1063/5.0122272  

   Xu, S.; Zhang, S.; Kirch, J. D.; Suri, S.; Pokharel, N.; Gao, H.; Kim, H.; Dhingra, P.; Lee, M. L.; Botez, D.; et al (October 2022, Applied Physics Letters)

   Room-temperature, pulsed-operation lasing of 8.5  μm-emitting InP-based quantum cascade lasers (QCLs), with low threshold-current density and watt-level output power, is demonstrated from structures grown on (001) GaAs substrates by metal-organic chemical vapor deposition. Prior to growing the laser structure, which contains a 35-stage In 0.53 Ga 0.47 As/In 0.52 Al 0.48 As lattice-matched active-core region, a ∼2  μm-thick nearly fully relaxed InP buffer with strained 1.6 nm-thick InAs quantum-dot-like dislocation-filter layers was grown. A smooth terminal buffer-layer surface, with roughness as low as 0.4 nm on a 10 × 10  μm 2 scale, was obtained, while the estimated threading-dislocation density was in the mid-range × 10 8  cm −2 . A series of measurements, on lasers grown on InP metamorphic buffer layers (MBLs) and on native InP substrates, were performed for understanding the impact of the buffer-layer's surface roughness, residual strain, and threading-dislocation density on unipolar devices such as QCLs. As-cleaved devices, grown on InP MBLs, were fabricated as 25  μm × 3 mm deep-etched ridge guides with lateral current injection. The results are pulsed maximum output power of 1.95 W/facet and a low threshold-current density of 1.86 kA/cm 2 at 293 K. These values are comparable to those obtained from devices grown on InP: 2.09 W/facet and 2.42 kA/cm 2 . This demonstrates the relative insensitivity of the device-performance metrics on high residual threading-dislocation density, and high-performance InP-based QCLs emitting near 8  μm can be achieved on lattice-mismatched substrates. 

   more » « less
2. Anomalous Stranski-Krastanov growth of (111)-oriented quantum dots with tunable wetting layer thickness

   https://doi.org/10.1038/s41598-019-54668-z  

   Schuck, Christopher F.; Roy, Simon K.; Garrett, Trent; Yuan, Qing; Wang, Ying; Cabrera, Carlos I.; Grossklaus, Kevin A.; Vandervelde, Thomas E.; Liang, Baolai; Simmonds, Paul J. (December 2019, Scientific Reports)

   Abstract Driven by tensile strain, GaAs quantum dots (QDs) self-assemble on In_0.52Al_0.48As(111)A surfaces lattice-matched to InP substrates. In this study, we show that the tensile-strained self-assembly process for these GaAs(111)A QDs unexpectedly deviates from the well-known Stranski-Krastanov (SK) growth mode. Traditionally, QDs formed via the SK growth mode form on top of a flat wetting layer (WL) whose thickness is fixed. The inability to tune WL thickness has inhibited researchers’ attempts to fully control QD-WL interactions in these hybrid 0D-2D quantum systems. In contrast, using microscopy, spectroscopy, and computational modeling, we demonstrate that for GaAs(111)A QDs, we can continually increase WL thickness with increasing GaAs deposition, even after the tensile-strained QDs (TSQDs) have begun to form. This anomalous SK behavior enables simultaneous tuning of both TSQD size and WL thickness. No such departure from the canonical SK growth regime has been reported previously. As such, we can now modify QD-WL interactions, with future benefits that include more precise control of TSQD band structure for infrared optoelectronics and quantum optics applications. 

   more » « less
3. A new type of cyclotron resonance from charge-impurity scattering in the bulk-insulating Bi ₂ Se ₃ thin films

   https://doi.org/10.1088/1361-6463/ac7a72  

   Han, Xingyue; Salehi, Maryam; Oh, Seongshik; Wu, Liang (June 2022, Journal of Physics D: Applied Physics)

   Abstract This work focuses on the low frequency Drude response of bulk-insulating topological insulator (TI) Bi 2 Se 3 films. The frequency and field dependence of the mobility and carrier density are measured simultaneously via time-domain terahertz spectroscopy. These films are grown on buffer layers, capped by Se, and have been exposed in air for months. Under a magnetic field up to 7 Tesla, we observe prominent cyclotron resonances (CRs). We attribute the sharp CR to two different topological surface states from both surfaces of the films. The CR sharpens at high fields due to an electron-impurity scattering. By using magneto-terahertz spectroscopy, we confirm that these films are bulk-insulating, which paves the way to use intrinsic TIs without bulk carriers for applications including topological spintronics and quantum computing. 

   more » « less
4. On-demand terahertz surface wave generation with microelectromechanical-system-based metasurface

   https://doi.org/10.1364/OPTICA.444999  

   Chen, Chunxu; Kaj, Kelson; Zhao, Xiaoguang; Huang, Yuwei; Averitt, Richard_D; Zhang, Xin (December 2021, Optica)

   During the past decade, metasurfaces have shown great potential to complement standard optics, providing novel pathways to control the phase, amplitude, and polarization of electromagnetic waves utilizing arrays of subwavelength resonators. We present dynamic surface wave (SW) switching at terahertz frequencies utilizing a mechanically reconfigurable metasurface. Our metasurface is based on a microelectromechanical system (MEMS) consisting of an array of micro-cantilever structures, enabling dynamic tuning between a plane wave (PW) and a SW for normal incidence terahertz radiation. This is realized using line-by-line voltage control of the cantilever displacements to achieve full-span ( $2\mathrm{\pi <\#comment/>}$) phase control. Full-wave electromagnetic simulations and terahertz time-domain spectroscopy agree with coupled mode theory, which was employed to design the metasurface device. A conversion efficiency of nearly 60% has been achieved upon switching between the PW and SW configurations. Moreover, a nearly 100 GHz working bandwidth is demonstrated. The MEMS-based control modality we demonstrate can be used for numerous applications, including but not limited to terahertz multifunctional metasurface devices for spatial light modulation, dynamic beam steering, focusing, and beam combining, which are crucial for future “beyond 5G” communication systems. 

   more » « less
5. Continuous wave operation of terahertz metasurface quantum-cascade VECSEL with a long intra-cryostat cavity

   https://doi.org/10.1063/5.0107667  

   Wu, Yu; Curwen, Christopher A.; Hayton, Darren J.; Reno, John L.; Williams, Benjamin S. (November 2022, Applied Physics Letters)

   We report continuous wave (cw) operation of a terahertz quantum-cascade vertical-external-cavity surface-emitting laser with an external cavity length of approximately 30 mm, benefited by an intra-cryostat focusing cavity. Compared to previous plano–plano cavities, an off-axis paraboloid mirror is introduced into the external cavity as a focusing element to reduce the diffraction loss and to enable cw lasing using small-area metasurfaces and long cavity lengths. The device shows lasing operation in the cw mode up to 111 K, and cw output power up to 11.5 mW at 77 K (0.5% wall-plug efficiency). A circular, directive beam pattern is collected, and free-running linewidths on the order of tens of kHz are measured over tens of seconds. 

   more » « less