skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: The new monolithic ASIC of the preshower detector for di-photon measurements in the FASER experiment at CERN
Abstract The ForwArd Search ExpeRiment (FASER) is an experiment searching for new light and weakly-interacting particles at CERN’s Large Hadron Collider. FASER is composed of different sub-detectors, including silicon microstrip detectors, scintillator counters and an electromagnetic calorimeter. In this paper, a new preshower detector for the FASER experiment is presented. The new detector, based on monolithic pixel ASICs, will provide excellent spatial and time resolutions and a large charge dynamic range. First results from a prototype chip produced by IHP in 130 nm SiGe BiCMOS technology are shown.  more » « less
Award ID(s):
2111427 2110929
PAR ID:
10431552
Author(s) / Creator(s):
Date Published:
Journal Name:
Journal of Instrumentation
Volume:
18
Issue:
02
ISSN:
1748-0221
Page Range / eLocation ID:
C02002
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Instrumentation)
    Abstract FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned with the beam collisions axis. FASER also includes a sub-detector, FASERν, designed to detect neutrinos produced in the LHC collisions and to study their properties. In this paper, each component of the FASER detector is described in detail, as well as the installation of the experiment system and its commissioning using cosmic-rays collected in September 2021 and during the LHC pilot beam test carried out in October 2021. FASER has successfully started taking LHC collision data in 2022, and will run throughout LHC Run 3. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Instrumentation)
    Abstract The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500–1000 Hz of other particles originating from the ATLAS interaction point. A very high efficiency trigger and data acquisition system is required to ensure that the physics events of interest will be recorded. This paper describes the trigger and data acquisition system of the FASER experiment and presents performance results of the system acquired during initial commissioning. 
    more » « less
  3. ; (, The European Physical Society Conference on High Energy Physics 2021)
    The FASER experiment is a new small and inexpensive experiment that is being placed 480 meters downstream of the ATLAS experiment at the CERN LHC. The experiment will shed light on currently unexplored phenomena, having the potential to make a revolutionary discovery. FASER is designed to capture decays of exotic particles, produced in the very forward region, out of the ATLAS detector acceptance. This talk will present the physics prospects, the detector design, and the construction progress of FASER. The experiment has been successfully installed and will take data during the LHC Run-3. 
    more » « less
  4. (, The Ninth Annual Conference on Large Hadron Collider Physics (LHCP2021))
    The LHC Run III will be a crucial run for the two LHC forward experiments: LHCf and FASER. In particular, Run III will be the last run where the LHCf detector can operate, and the first run of the new FASER project. The LHCf experiment is dedicated to precise measurements of forward production, necessary to tune hadronic interaction models employed in cosmic-ray physics. In Run III, the experiment will accomplish two fundamental goals: operating in p-p collisions at s√= s = 14 TeV, it will acquire a statistics that is ten times larger respect to Run II, in order to have precise measurements of π0 π 0 production; operating in high energy p-O and O-O collisions, it will measure forward production in a configuration that is very similar to the first interaction of an Ultra High Energy Cosmic Ray with an atmospheric nucleus. The FASER experiment is dedicated to the search of new weakly-interacting light particles thanks to a forward detector with proper shielding from Standard Model background. In Run III, it will be able to search for new particles with a good sensitivity, which can be strongly improved after an upgrade before Run IV. In addition, thanks to the dedicated FASERν detector, it will measure neutrino production at a collider for the first time. In this contribution, we discuss the main results expected from the LHCf and FASER experiments in Run III, highlighting their fundamental contribution in research fields that are not accessible to the four large LHC experiments. 
    more » « less
  5. (, Instruments)
    FASER, or the Forward Search Experiment, is a new experiment at CERN designed to complement the LHC’s ongoing physics program, extending its discovery potential to light and weakly interacting particles that may be produced copiously at the LHC in the far-forward region. New particles targeted by FASER, such as long-lived dark photons or axion-like particles, are characterised by a signature with two oppositely charged tracks or two photons in the multi-TeV range that emanate from a common vertex inside the detector. The full detector was successfully installed in March 2021 in an LHC side tunnel 480 m downstream from the interaction point in the ATLAS detector. FASER is planned to be operational for LHC Run 3. The experiment is composed of a silicon-strip tracking-based spectrometer using three dipole magnets with a 20 cm aperture, supplemented by four scintillator stations and an electromagnetic calorimeter. The FASER electromagnetic calorimeter is constructed from four spare LHCb calorimeter modules. The modules are of the Shashlik type with interleaved scintillator and lead plates that result in 25 radiation lengths and 1% energy resolution for TeV electromagnetic showers. In 2021, a test beam campaign was carried out using one of the CERN SPS beam lines to set up the calibration of the FASER calorimeter system in preparation for physics data taking. The relative calorimeter response to electrons with energies between 10 and 300 GeV, as well as high energy muons and pions, has been measured under various high voltage settings and beam positions. The measured calorimeter resolution, energy calibration, and particle identification capabilities are presented. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email