An official website of the United States government
Abstract This letter compares the predictions of two expressions proposed for the porosity evolution in the context of rate and state friction. One (Segall & Rice, 1995,https://doi.org/10.1029/95jb02403) depends only on the sliding velocity; the other (Sleep, 1995,https://doi.org/10.1029/94jb03340) depends only on the state variable. Simulations of both are similar for velocity stepping and slide‐hold‐slide experiments. They differ significantly for normal effective stress jumps at constant sliding velocity. Segall and Rice (1995,https://doi.org/10.1029/95jb02403) predicts no change in the porosity; Sleep (1995,https://doi.org/10.1029/94jb03340) does. Simulation with a spring‐block model indicates that the magnitude of rapid slip events is essentially the same for the two formulations. Variations of porosity and induced pore pressure near rapid slip events are similar and consistent with experimental observations. Predicted porosity variations during slow slip intervals and the time at which rapid slip events occur are significantly different. The simulation indicates that changes in friction stress due to pore pressure changes exceed those due to rate and state effects.
more »
« less
Upper Mantle Structure Beneath the Contiguous US Resolved With Array Observations of SKS Multipathing and Slowness Vector Perturbations
Abstract Continent‐scale observations of seismic phenomena have provided multi‐scale constraints of the Earth's interior. Of those analyzed, array‐based observations of slowness vector properties (backazimuth and horizontal slowness) and multipathing have yet to be made on a continental scale. Slowness vector measurements give inferences on mantle heterogeneity properties such as velocity perturbation and velocity gradient strength and quantify their effect on the wavefield. Multipathing is a consequence of waves interacting with strong velocity gradients resulting in two arrivals with different slowness vector properties and times. The mantle structure beneath the contiguous Unites States has been thoroughly analyzed by previous seismic studies and is data‐rich, making it an excellent testing ground to both analyze mantle structure with our approach and compare with other imaging techniques. We apply an automated array‐analysis technique to an SKS data set to create the first continent‐scale data set of multipathing and slowness vector measurements. We analyze the divergence of the slowness vector deviation field to highlight seismically slow and fast regions. Our results resolve several slow mantle anomalies beneath Yellowstone, the Appalachian mountains and fast anomalies throughout the mantle. Many of the anomalies cause multipathing in frequency bands 0.15–0.30 and 0.20–0.40 Hz which suggests velocity transitions over at most 500 km exist. Comparing our observations to synthetics created from tomography models, we find model NA13 (Bedle et al., 2021,https://doi.org/10.1029/2021GC009674) fits our data best but differences still remain. We therefore suggest slowness vector measurements should be used as an additional constraint in tomographic inversions and will lead to better resolved models of the mantle.
more »
« less
- Award ID(s):
- 1723081
- PAR ID:
- 10434098
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 128
- Issue:
- 7
- ISSN:
- 2169-9313
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Wave breaking induced bubbles contribute a significant part of air‐sea gas fluxes. Recent modeling of the sea state dependent CO2flux found that bubbles contribute up to ∼40% of the total CO2air‐sea fluxes (Reichl & Deike, 2020,https://doi.org/10.1029/2020gl087267). In this study, we implement the sea state dependent bubble gas transfer formulation of Deike and Melville (2018,https://doi.org/10.1029/2018gl078758) into a spectral wave model (WAVEWATCH III) incorporating the spectral modeling of the wave breaking distribution from Romero (2019,https://doi.org/10.1029/2019gl083408). We evaluate the accuracy of the sea state dependent gas transfer parameterization against available measurements of CO2gas transfer velocity from 9 data sets (11 research cruises, see Yang et al. (2022,https://doi.org/10.3389/fmars.2022.826421)). The sea state dependent parameterization for CO2gas transfer velocity is consistent with observations, while the traditional wind‐only parameterization used in most global models slightly underestimates the observations of gas transfer velocity. We produce a climatology of the sea state dependent gas transfer velocity using reanalysis wind and wave data spanning 1980–2017. The climatology shows that the enhanced gas transfer velocity occurs frequently in regions with developed sea states (with strong wave breaking and high significant wave height). The present study provides a general sea state dependent parameterization for gas transfer, which can be implemented in global coupled models.more » « less
-
null (Ed.)SUMMARY Horizontal slowness vector measurements using array techniques have been used to analyse many Earth phenomena from lower mantle heterogeneity to meteorological event location. While providing observations essential for studying much of the Earth, slowness vector analysis is limited by the necessary and subjective visual inspection of observations. Furthermore, it is challenging to determine the uncertainties caused by limitations of array processing such as array geometry, local structure, noise and their effect on slowness vector measurements. To address these issues, we present a method to automatically identify seismic arrivals and measure their slowness vector properties with uncertainty bounds. We do this by bootstrap sampling waveforms, therefore also creating random sub arrays, then use linear beamforming to measure the coherent power at a range of slowness vectors. For each bootstrap sample, we take the top N peaks from each power distribution as the slowness vectors of possible arrivals. The slowness vectors of all bootstrap samples are gathered and the clustering algorithm DBSCAN (Density-Based Spatial Clustering of Applications with Noise) is used to identify arrivals as clusters of slowness vectors. The mean of slowness vectors in each cluster gives the slowness vector measurement for that arrival and the distribution of slowness vectors in each cluster gives the uncertainty estimate. We tuned the parameters of DBSCAN using a data set of 2489 SKS and SKKS observations at a range of frequency bands from 0.1 to 1 Hz. We then present examples at higher frequencies (0.5–2.0 Hz) than the tuning data set, identifying PKP precursors, and lower frequency by identifying multipathing in surface waves (0.04–0.06 Hz). While we use a linear beamforming process, this method can be implemented with any beamforming process such as cross correlation beamforming or phase weighted stacking. This method allows for much larger data sets to be analysed without visual inspection of data. Phenomena such as multipathing, reflections or scattering can be identified automatically in body or surface waves and their properties analysed with uncertainties.more » « less
-
Abstract We report on the mountain top observation of three terrestrial gamma‐ray flashes (TGFs) that occurred during the summer storm season of 2021. To our knowledge, these are the first TGFs observed in a mountaintop environment and the first published European TGFs observed from the ground. A gamma‐ray sensitive detector was located at the base of the Säntis Tower in Switzerland and observed three unique TGF events with coincident radio sferic data characteristic of TGFs seen from space. We will show an example of a “slow pulse” radio signature (Cummer et al., 2011,https://doi.org/10.1029/2011GL048099; Lu et al., 2011,https://doi.org/10.1029/2010JA016141; Pu et al., 2019,https://doi.org/10.1029/2019GL082743; Pu et al., 2020,https://doi.org/10.1029/2020GL089427), a −EIP (Lyu et al., 2016,https://doi.org/10.1002/2016GL070154; Lyu et al., 2021,https://doi.org/10.1029/2021GL093627; Wada et al., 2020,https://doi.org/10.1029/2019JD031730), and a double peak TGF associated with an extraordinarily powerful and complicated positive‐polarity sferic, where each TGF peak is possibly preceded by a short burst of stepped leader emission.more » « less
-
Abstract Liu et al. (2022,https://doi.org/10.1029/2021GL093691) used Rayleigh waves extracted from the cross‐correlation of ambient noise recorded by two stations to monitor the seismic velocity variations associated with the 2018 Kı̄lauea eruption. However, their study ignored the fact that the tremors on the Island of Hawai'i were dominated by a source at the Kı̄lauea summit before the eruption. Close inspection of the waveforms of the station pair PAUD‐STCD shows a simple, mistakenly identified wave traveling direction in Liu et al. (2022,https://doi.org/10.1029/2021GL093691). A correct wave traveling direction agrees with the noise source model, where the dominant tremor source should be at the Kı̄lauea summit. Because of the drastic change in the tremor source after the eruption, the cross‐correlation of the tremor records may reflect predominantly changes in the source rather than in the medium properties between the two stations.more » « less
