An official website of the United States government
Elastomeric rollers are important components in applications such as printing and roll-to-roll manufacturing. To gain insight into roller mechanics and provide a basis for further investigations into dynamic rolling problems where rolling instabilities and rolling friction arise, we employ a specially designed apparatus to obtain displacement and strain fields via digital image correlation (DIC) under applied loads.We test loading scenarios leading to impending slip of an elastomeric roller, mounted on a steel hub, and in contact with a glass (rigid) substrate. We first examine strain fields under normal loading and compare them with the closest analytical predictions. We also analyze the strain fields under normal and tangential loading for which limited analytical predictions exist. For each loading scenario, we discuss the displacement and strain fields of the roller sidewall and contact interface. We implement a conceptual string model to demonstrate how stick and slip zones develop within the contact area as well as how memory effects arise during cyclic loading. This memory effect is then verified experimentally using the DIC strain fields. Additionally, we demonstrate a means for identifying the stick zone area between the roller and substrate using the experimentally-obtained displacement fields. We believe the apparatus, and the ability to obtain experimental displacement and strain fields, will prove valuable in understanding roller mechanics and associated instabilities.
more »
« less
Instrument for in situ study of rolling under normal load and torque
Instabilities that develop at the contact interface of solid rollers or airless tires while in motion can lead to increased energy losses and reduced service life. This manuscript describes an instrument that can give better insight into the origin of such instabilities by monitoring both local and global roller mechanics. This is done by simultaneously obtaining force and displacement data from sensors as well as optical measurements and local deformation fields across two different planes, extracted from images taken by a high-speed camera. Multiple loading configurations are possible, ranging from static normal loading of the roller to free rolling and rolling with a propulsive or a braking torque. Instrument functions, elements, and design are presented in detail and its capabilities are demonstrated by obtaining measurements such as width of the contact interface under normal loading, strain fields of the roller sidewall and contact interface under normal loading, and the roller’s resistance to motion for free and forced rolling.
more »
« less
- Award ID(s):
- 1916840
- PAR ID:
- 10434626
- Date Published:
- Journal Name:
- Review of Scientific Instruments
- Volume:
- 93
- Issue:
- 9
- ISSN:
- 0034-6748
- Page Range / eLocation ID:
- 093705
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The manufacturing of thin films with structured surfaces by large‐scale rolling has distinct advantages over other techniques, such as lithography, due to scalability. However, it is not well understood or quantified how processing conditions can affect the microstructure at different physical scales. Hence, the objective of this investigation is to develop a validated computational model of the symmetric forward‐roll coating process to understand, predict, and control the morphology of carbon nanotube (CNT)–polydimethylsiloxane (PDMS) pastes. The effects of the thin‐film rheological properties and the roller gap on the ribbing behavior are investigated and a ribbing instability prediction model is formulated from experimental measurements and computational predictions. The CNT–PDMS thin‐film system is modeled by a nonlinear implicit dynamic finite‐element method that accounts for ribbing instabilities, large displacements, rolling contact, and material viscoelasticity. Dynamic mechanical analysis is used to obtain the viscoelastic properties of the CNT–PDMS paste for various CNT weight distributions. Furthermore, a Morris sensitivity analysis is conducted to obtain insights on the dominant predicted characteristics pertaining to the ribbing microstructure. Based on the sensitivity analysis, a critical ribbing aspect ratio is identified for the CNT–PDMS system corresponding to a critical roller gap.more » « less
-
Past decades featured significant advancements in additive and micromanufacturing that facilitated the creation of functional patterned surfaces with impressive spatial resolutions. However, these techniques are expensive and require a considerable amount of time and energy, and hence lack scalability to practical surfaces. Recent techniques employing spinodal decomposition and instabilities amplified via centrifugal acceleration offer viable and cheaper alternatives. The patterns created by those techniques, however, vary randomly in geometry. When interfacing those patterned surfaces with other components and under self-contact scenarios, geometric variations lead to stress concentration and abrupt failure around the contact. In this study, we investigate numerically real contact areas, contact tractions, and stress concentration. We generate patterned surfaces in congruence with actual surfaces created by those techniques. Then, we conduct normal-contact analyses of those surfaces boundary element method (BEM) under nominal mean pressures ranging from 0.001E* toE*, whereE* is the contact modulus. We record real contact areas and stress concentration as a function of nominal mean pressures. We compare these values with the analytical solutions from sinusoidally-patterned and randomly rough surfaces. Randomness in pattern geometry is primarily influenced by the processing parameters such as the degree of anisotropy in spinodal decomposition and acceleration in amplified instabilities. To understand the influence of the processing parameters, we perform a parametric study. We find isotropic spinodal decomposition creates patterns that deliver contact area and traction distributions similar to randomly rough surfaces, and lead to high-stress concentrations. Such high-stress concentrations are expected to occur under self-contact loading scenarios, and thus can explain the compromised resilience and strength in recently-proposed spinodal metamaterials. For patterned surfaces created by amplified instabilities, high-stress concentrations are obtained for the surfaces created at high accelerations. At high accelerations, increased elastic instabilities and stochastic growth result in a more skewed and broader distribution in heights. Therefore, high-stress concentrations are inevitable. To account for combined loading scenarios, we conduct additional simulations on the same surface patterns with frictional pre-sliding contacts. We find the frictional tractions play a secondary role in stress concentrations where the primary factor is the processing parameters determining the degree of randomness in pattern geometry.more » « less
-
Digital image correlation (DIC) is an increasingly popular and effective non-contact method for measuring full-field displacements and strains of deformable bodies under load. Current DIC methods applied to bodies undergoing large displacements and rotations require a large measurement area for both the reference (i.e., undeformed) image and the deformed images. This can limit the resulting resolution of the displacement and strain fields. To address this issue, we propose a two-stage dynamic DIC method capable of measuring displacements and strains under material convection with high resolution. During the first stage, the reference image is assembled from smaller, high-resolution images of the undeformed object obtained using a spatially-fixed or moving frame. Following capture, each sub-image is rigidly translated and rotated into its appropriate place, thereby producing a full, high-resolution image of the reference body. In stage two, images of the loaded and deformed body, again obtained using a small camera frame with high resolution, are aligned with matching regions of the undeformed composite image using BRISK feature detection before performing DIC.We demonstrate the method on a contact problem whereby an elastomeric roller travels along a rigid surface. In doing so, we obtain fine resolution measurements of the state of strain of the region of the roller sidewall in contact with the substrate, even as new material convects through the region of interest. We present these measurements as a series of images and videos capturing strain evolution as the roller transitions from static loads to a fully dynamic steady-state, documenting the effectiveness of the method.more » « less
-
ABSTRACT The light curves of radioactive transients, such as supernovae and kilonovae, are powered by the decay of radioisotopes, which release high-energy leptons through $$\beta ^+$$ and $$\beta ^-$$ decays. These leptons deposit energy into the expanding ejecta. As the ejecta density decreases during expansion, the plasma becomes collisionless, with particle motion governed by electromagnetic forces. In such environments, strong or turbulent magnetic fields are thought to confine particles, though the origin of these fields and the confinement mechanism have remained unclear. Using fully kinetic particle-in-cell (PIC) simulations, we demonstrate that plasma instabilities can naturally confine high-energy leptons. These leptons generate magnetic fields through plasma streaming instabilities, even in the absence of pre-existing fields. The self-generated magnetic fields slow lepton diffusion, enabling confinement, and transferring energy to thermal electrons and ions. Our results naturally explain the positron trapping inferred from late-time observations of thermonuclear and core-collapse supernovae. Furthermore, they suggest potential implications for electron dynamics in the ejecta of kilonovae. We also estimate synchrotron radio luminosities from positrons for Type Ia supernovae and find that such emission could only be detectable with next-generation radio observatories from a Galactic or local-group supernova in an environment without any circumstellar material.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0100081
